Clark's Corvair Parts, Inc. - Corvair Parts Catalog

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

153

FRONT SUSPENSION PARTS

FC: See page 157 Typical '60-69 Cars

MULTI-KITS

see Blue pg. MK-12, 13

FRONT SUSPENSION – 1960-69 CARS: Check for application. PARTS NOT SHOWN ARE LISTED AT THE END OF THIS SECTION.

Sometimes we have complete used front suspensions. PLEASE CHECK.

VANS – LISTED SEPARATELY.

BOLTS: FOR ALL SUSPENSION BOLTS – See page 180

PICTURE #

1. UPPER A-ARM BUSHINGS & PARTS: Exact reproduction. SEE COMPLETE SETS BELOW.

FRONT IS BUSHING TOWARDS FRONT OF CAR. Bushings are identical either side.

1960-64 [Front bushing – 2 per car] C1665B 4 oz. ea.

1960-64 [Rear bushing – Longer sleeve – 2 per car] C1665C 4 oz. ea.

1965-69 [Front & Rear bushing – 4 per car] C1665A 4 oz. ea.

NYLON PERFORMANCE BUSHINGS

See page 167B

COMPLETE BUSHING SETS: Complete for 1 side. Includes all the correct upper A-Arm bushings, bolts, washers, and any lock washers

and/or seals for 1 side. Does not include bolts that hold shaft to crossmember. SEE BOTTOM OF PAGE.

SET 1960-64 Cars: Either Side C6438 1 lb./set SET 1965-69 Cars: Either Side C6439 1 lb./set

COMPLETE BUSHING & A-ARM SHAFT SETS: Forged Shafts

This KIT includes the COMPLETE BUSHING SET AND A REPRODUCED SHAFT,

(often rusted or worn). That’s a shaft, both bushings, all necessary bolts,

washers, seals, etc. for 1 side. See bottom of page for bolts to crossmember.

See page 154 for just the shaft.

SET 1960-64 Cars C6854K 3 lbs./set SET 1965-69 Cars C6855K 3 lbs./set

1A. BOLTS – END OF SHAFT: Sold Set of bolts & washers for 1 side.

1960-64 Cars "Gr 8" C2130A 4 oz./set 1965-69 Cars "Gr 8" C2130 4 oz./set

1B. SPECIAL CONCAVE WASHERS: [1960-64 USED 2 STYLES] [TOTAL OF 6 WASHERS]

1960-64 [2 needed per car – larger hole] C6431 2 oz. ea.

1960-64 & 1965-69 [4 needed per car] C6430 2 oz. ea.

1C. BOLTS – HOLD SHAFT TO CROSSMEMBER: (not in COMPLETE SET) "1" = (2B,2LW,2N) enough for 1 shaft.

1960-64 Cars "Gr 8" C2132A 4 oz.

1965-69 Cars "Gr 8" C2132 4 oz.

NOT SHOWN:

Rubber Seal – 1960-64: Goes under rear (towards rear of car) concave washer. 2 needed per car.

(INCLUDED IN "SETS" ABOVE) C6432 1 oz. ea.

Special Lock Washer – 1960-64: Used to keep rear washer from turning. 2 needed per car. Sold set of 2.

(INCLUDED IN "SETS" ABOVE) C6437 1 oz./set

BUSHING INSTALLATION TOOLS

See page 338

Pg. 152

Pg. 180

Page 180

C1665C C1665A

C1665B

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**153FRONT SUSPENSION PARTSFC: See page 157 Typical '60-69 CarsMULTI-KITSsee Blue pg. MK-12, 13FRONT SUSPENSION - 1960-69 CARS: Check for application. PARTS NOT SHOWN ARE LISTED AT THE END OF THIS SECTION. f Sometimes we have complete used front suspensions. PLEASE CHECK. VANS - LISTED SEPARATELY. BOLTS: FOR ALL SUSPENSION BOLTS - See page 180PICTURE # 1. UPPER A-ARM BUSHINGS & PARTS: Exact reproduction. SEE COMPLETE SETS BELOW. FRONT IS BUSHING TOWARDS FRONT OF CAR. Bushings are identical either side. 1960-64 [Front bushing - 2 per car] C1665B 4 oz. ea. 1960-64 [Rear bushing - Longer sleeve - 2 per car] C1665C 4 oz. ea. 1965-69 [Front & Rear bushing - 4 per car] C1665A 4 oz. ea. NYLON PERFORMANCE BUSHINGS See page 167B COMPLETE BUSHING SETS: Complete for 1 side. Includes all the correct upper A-Arm bushings, bolts, washers, and any lock washers and/or seals for 1 side. Does not include bolts that hold shaft to crossmember. SEE BOTTOM OF PAGE. SET 1960-64 Cars: Either Side C6438 1 lb./set SET 1965-69 Cars: Either Side C6439 1 lb./set COMPLETE BUSHING & A-ARM SHAFT SETS: Forged Shafts This KIT includes the COMPLETE BUSHING SET AND A REPRODUCED SHAFT, (often rusted or worn). That's a shaft, both bushings, all necessary bolts, washers, seals, etc. for 1 side. See bottom of page for bolts to crossmember. See page 154 for just the shaft. SET 1960-64 Cars C6854K 3 lbs./set SET 1965-69 Cars C6855K 3 lbs./set 1A. BOLTS - END OF SHAFT: Sold Set of bolts & washers for 1 side. 1960-64 Cars "Gr 8" C2130A 4 oz./set 1965-69 Cars "Gr 8" C2130 4 oz./set 1B. SPECIAL CONCAVE WASHERS: [1960-64 USED 2 STYLES] [TOTAL OF 6 WASHERS] 1960-64 [2 needed per car - larger hole] C6431 2 oz. ea. 1960-64 & 1965-69 [4 needed per car] C6430 2 oz. ea. 1C. BOLTS - HOLD SHAFT TO CROSSMEMBER: (not in COMPLETE SET) "1" = (2B,2LW,2N) enough for 1 shaft. 1960-64 Cars "Gr 8" C2132A 4 oz. 1965-69 Cars "Gr 8" C2132 4 oz.NOT SHOWN:Rubber Seal - 1960-64: Goes under rear (towards rear of car) concave washer. 2 needed per car. (INCLUDED IN "SETS" ABOVE) C6432 1 oz. ea.Special Lock Washer - 1960-64: Used to keep rear washer from turning. 2 needed per car. Sold set of 2. (INCLUDED IN "SETS" ABOVE) C6437 1 oz./set25BUSHING INSTALLATION TOOLSSee page 338Pg. 152Pg. 180Page 180C1665C C1665AC1665B