Home Order Catalog Online Catalog New Items Contact Us
 Prev 
i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
180
FRONT SUSPENSION BOLTS
UPPER A-ARM ATTACHING HARDWARE – see page 153 for bushings, etc.
"A" BOLTS AT END OF SHAFT – HOLD BUSHING CAP ON: (1 Set per side) (2 bolts, 2 LW). All 4 oz./set.
1960-64 Cars "Gr 8": C2130A 1961-65 Vans "Gr 8": C4756 1965-69 Cars "Gr 8": C2130
"B" BOLTS SHAFT TO CROSSMEMBER: (1 Set per side) (2 bolts, 2 LW, 2 nuts).
1960-64 Cars "Gr 8": C2132A 4 oz. 1961-65 Vans "Gr 8": C4755 6 oz.
1965-69 Cars "Gr 8": C2132 4 oz.
SPECIAL CONCAVE A-ARM WASHERS: 1960-64 used 2 styles for a total of 6; 65-69 requires 4.
1960-64 (2 needed per car – larger hole): C6431 2 oz. ea. 1960-64 & 1965-69 (4 needed per car): C6430 2 oz. ea.
SPECIAL LOCK WASHER: 1960-64 – Used to keep rear washer from turning. 2 sets needed per car. Set/2 Washers: C6437 1 oz./set
UPPER BALL JOINT HARDWARE KITS: New ball joints come WITH all hardware, order these if you need replacements.
1960-69 Cars SET OF 4 bolts, LW, & nuts. C10910 4 oz.
1960-69 Cars SET OF 4 bolts, LW , nuts , slotted nut, grease fitting & cotter pin. C10911 5 oz.
SLOTTED NUT – FC Upper: (come w/ new ball joints) C2144 2 oz.
FC Lower (come w/ new ball joints) C5429L 2 oz.
LOWER A-ARM ATTACHING HARDWARE
BOLTS AT END OF SHAFT: Hold bushing washer on 1 side. (2 bolts, 2 LW) - 1961-65 FC "Gr 8" C4757 6 oz.
INNER END OF A-ARM TO CROSSMEMBER: 2 needed. 1960-64 Cars "Gr 8" (1 bolt, LW, nut) C2128A 6 oz.
1965-69 For camber adjusting. (bolt, 2 special washers that fit in bushing, 2 cam washer, LW & special nut). C632R 8 oz. ea.
INDIVIDUAL PARTS – See page 154 (#9)
LOWER A-ARM SHAFT TO CROSSMEMBER: 1961-65 FC (Vans). 4 oz. ea.
FRONT BOLTS – 2 needed/side. (1 bolt, LW) "Gr 8": C4768 REAR BOLTS – 1 needed/side. (1 bolt, LW, nut) "Gr 8": C4769
CROSSMEMBER TO CAR – Bolts come with lock washer and/or flat washer.
CAGE NUTS: Replace those old, rusty, fatigued ones since they are about all that holds the suspension in. Custom made for us
to exactly replace the originals. 1960-69 Cars. 4 needed per car. C3142 2 oz. ea.
Longer Bolts: 4 needed per Car 1960-64 Cars (1 B, 1 LW) "Gr 8" C3539 4 oz. ea.
4 needed per Van 1961-64 Vans (1 B, FW, LW, nut) "Gr 8" C4752 6 oz. ea.
4 needed per Car 1965-69 Cars (1 B, 1 LW) "Gr 8" C3539 4 oz. ea.
Shorter Bolts: 2 needed per Car 1960-69 Cars (1B, LW, FW) "Gr 8" C3540 2 oz. ea.
1960-64 Car & FC FT CROSSMEMBER BUMPER BOLT KIT – Kit for 1 bumper (2 B, 2 LW, 2 nuts). 4 needed/Car. 2 needed/FC. C7455 2 oz.
1960-69 Cars – WASHER for SHORT FRONT SUSPENSION ATTACHING BOLT: This is a SPECIAL WASHER.
1" od. x 3/8" id X 9/64" (& comes with our short bolts – C3540). A "STANDARD" washer won't work! C887W 1 oz.
FRONT STABILIZER BAR BOLTS: Complete with lock washers & nuts.
OUTER STABILIZER HOLD DOWN BOLT KIT: For either side of all cars with stock stabilizer bar.
(1 B, 1 LW, 1 nut "Gr 8") – C2149 2 oz. ea. Stainless Steel – C1093 2 oz. ea.
INNER STABILIZER ATTACHING CLAMP BOLT KIT: 1960-69 Cars (1 B, 1 LW, 1 nut "Gr 8") – C2149 2 oz. ea. SS – C1093 2 oz. ea.
STABILIZER INNER SUPPORT ASSEMBLY UPPER BOLT KIT: 1962-69 All (1 B, 1 LW , 1 nut "Gr 8") – C6906 2 oz.
STEEL SPACER – UPPER BOLT: Inner support; usually very rusty. (1/2" o.d.) 1962-63 C6907C 4 oz. ea.
(3/4" o.d.) 1964-69 C6907A 4 oz. ea.
CONTROL ROD TO LOWER A-ARM STUDS: 2 used per side. Not in any bolt kits. Sold each. C3915 4 oz. ea.
NUTS & LOCKWASHERS: (set/4 LW, 4 nuts) – C3915N 2 oz.
STEERING BOLTS – with lock washers & nuts as required
STEERING BOX BOLTS: 1960-69 Cars – Set of 3 bolts, washers, for steering box to frame. "Gr 8": C3156 6 oz./set
STEERING BOX COVER: Set of 3 bolts. C4936 4 oz./set
STEERING BOX TO FRAME: 1961-65 FC (Vans) (3 B, 3 LW, 3 N) "Gr 8": C6907 6 oz./set
ARM BRACKET to FRAME: 1961-65 FC (Vans) (3 B, 3 LW, 3 N) "Gr 5": C4767 6 oz./set
NUTS for FC STEERING LINK ENDS: Steering link goes from steering box to boomerang. These nuts are larger than the regular tie rod nuts. C2403 2 oz.
STEERING ARM BOLT KIT: Complete for 1 side – 1960-69 Cars "Gr 8" C4775 6 oz./set
1961-65 Vans "Gr 8" C4770 6 oz./set
TIE ROD CLAMP BOLT KIT: Enough for 1 clamp (1 B, 1 LW, 1 N). 4 needed per car.
1960-69 Cars & Vans "Gr 5" C2146 2 oz./set
1960-69 Cars & Vans "Gr 8" C2147 2 oz./set
IDLER ARM ATTACHING BOLT SET: 1960-69 Cars – enough to attach arm to "frame" (2 B, 2 LW, 2 N) "Gr 8" C2136 4 oz./set
1961-65 FC (Vans) – attaches idler arm to frame (2 B, 2 LW, 2 N) C6856 6 oz./set
PITMAN ARM TO BOX SHAFT: 1960-69 All – Nut and washer set – C2145 4 oz./set
IDLER ARM NUT: 1960-69 Cars & Vans. C2144 2 oz.
SLOTTED NUTS: 1960-69 – These slotted nuts are for tie rod ends. Also attach transmission mounts to front transmission support. C726 1 oz.
COTTER PIN: 1960-69 – Set of 5 – For tie rod ends and idler arms – C2199 2 oz./set
STAINLESS: C3106 2 oz./set
CONTROL ROD BOLT KIT: Holds rod to A-arm (studs available above). Sold set for 1 side. 1960-69 Cars C4750 4 oz.
SPEEDOMETER CABLE BRACKET TO BACKING PLATE: 1965-69 All – 2 stainless bolts – C2142 2 oz.
SPEEDOMETER CABLE BRACKET TO BODY BOLT: 1965-69 – C5363 2 oz.
C632R
C3142
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**180FRONT SUSPENSION BOLTSUPPER A-ARM ATTACHING HARDWARE - see page 153 for bushings, etc."A" BOLTS AT END OF SHAFT - HOLD BUSHING CAP ON: (1 Set per side) (2 bolts, 2 LW). All 4 oz./set. 1960-64 Cars "Gr 8": C2130A 1961-65 Vans "Gr 8": C4756 1965-69 Cars "Gr 8": C2130"B" BOLTS SHAFT TO CROSSMEMBER: (1 Set per side) (2 bolts, 2 LW, 2 nuts). 1960-64 Cars "Gr 8": C2132A 4 oz. 1961-65 Vans "Gr 8": C4755 6 oz. 1965-69 Cars "Gr 8": C2132 4 oz.SPECIAL CONCAVE A-ARM WASHERS: 1960-64 used 2 styles for a total of 6; 65-69 requires 4. 1960-64 (2 needed per car - larger hole): C6431 2 oz. ea. 1960-64 & 1965-69 (4 needed per car): C6430 2 oz. ea.SPECIAL LOCK WASHER: 1960-64 - Used to keep rear washer from turning. 2 sets needed per car. Set/2 Washers: C6437 1 oz./setUPPER BALL JOINT HARDWARE KITS: New ball joints come WITH all hardware, order these if you need replacements. 1960-69 Cars SET OF 4 bolts, LW, & nuts. C10910 4 oz. 1960-69 Cars SET OF 4 bolts, LW , nuts , slotted nut, grease fitting & cotter pin. C10911 5 oz.SLOTTED NUT - FC Upper: (come w/ new ball joints) C2144 2 oz. FC Lower (come w/ new ball joints) C5429L 2 oz.LOWER A-ARM ATTACHING HARDWAREBOLTS AT END OF SHAFT: Hold bushing washer on 1 side. (2 bolts, 2 LW) - 1961-65 FC "Gr 8" C4757 6 oz.INNER END OF A-ARM TO CROSSMEMBER: 2 needed. 1960-64 Cars "Gr 8" (1 bolt, LW, nut) C2128A 6 oz. 1965-69 For camber adjusting. (bolt, 2 special washers that fit in bushing, 2 cam washer, LW & special nut). C632R 8 oz. ea. INDIVIDUAL PARTS - See page 154 (#9)LOWER A-ARM SHAFT TO CROSSMEMBER: 1961-65 FC (Vans). 4 oz. ea. FRONT BOLTS - 2 needed/side. (1 bolt, LW) "Gr 8": C4768 REAR BOLTS - 1 needed/side. (1 bolt, LW, nut) "Gr 8": C4769CROSSMEMBER TO CAR - Bolts come with lock washer and/or flat washer. CAGE NUTS: Replace those old, rusty, fatigued ones since they are about all that holds the suspension in. Custom made for us to exactly replace the originals. 1960-69 Cars. 4 needed per car. C3142 2 oz. ea.Longer Bolts: 4 needed per Car 1960-64 Cars (1 B, 1 LW) "Gr 8" C3539 4 oz. ea. 4 needed per Van 1961-64 Vans (1 B, FW, LW, nut) "Gr 8" C4752 6 oz. ea. 4 needed per Car 1965-69 Cars (1 B, 1 LW) "Gr 8" C3539 4 oz. ea.Shorter Bolts: 2 needed per Car 1960-69 Cars (1B, LW, FW) "Gr 8" C3540 2 oz. ea. 1960-64 Car & FC FT CROSSMEMBER BUMPER BOLT KIT - Kit for 1 bumper (2 B, 2 LW, 2 nuts). 4 needed/Car. 2 needed/FC. C7455 2 oz.1960-69 Cars - WASHER for SHORT FRONT SUSPENSION ATTACHING BOLT: This is a SPECIAL WASHER. 1" od. x 3/8" id X 9/64" (& comes with our short bolts - C3540). A "STANDARD" washer won't work! C887W 1 oz.FRONT STABILIZER BAR BOLTS: Complete with lock washers & nuts.OUTER STABILIZER HOLD DOWN BOLT KIT: For either side of all cars with stock stabilizer bar. (1 B, 1 LW, 1 nut "Gr 8") - C2149 2 oz. ea. Stainless Steel - C1093 2 oz. ea. INNER STABILIZER ATTACHING CLAMP BOLT KIT: 1960-69 Cars (1 B, 1 LW, 1 nut "Gr 8") - C2149 2 oz. ea. SS - C1093 2 oz. ea. STABILIZER INNER SUPPORT ASSEMBLY UPPER BOLT KIT: 1962-69 All (1 B, 1 LW , 1 nut "Gr 8") - C6906 2 oz.STEEL SPACER - UPPER BOLT: Inner support; usually very rusty. (1/2" o.d.) 1962-63 C6907C 4 oz. ea. (3/4" o.d.) 1964-69 C6907A 4 oz. ea.CONTROL ROD TO LOWER A-ARM STUDS: 2 used per side. Not in any bolt kits. Sold each. C3915 4 oz. ea. NUTS & LOCKWASHERS: (set/4 LW, 4 nuts) - C3915N 2 oz.STEERING BOLTS - with lock washers & nuts as required STEERING BOX BOLTS: 1960-69 Cars - Set of 3 bolts, washers, for steering box to frame. "Gr 8": C3156 6 oz./set STEERING BOX COVER: Set of 3 bolts. C4936 4 oz./set STEERING BOX TO FRAME: 1961-65 FC (Vans) (3 B, 3 LW, 3 N) "Gr 8": C6907 6 oz./set ARM BRACKET to FRAME: 1961-65 FC (Vans) (3 B, 3 LW, 3 N) "Gr 5": C4767 6 oz./set NUTS for FC STEERING LINK ENDS: Steering link goes from steering box to boomerang. These nuts are larger than the regular tie rod nuts. C2403 2 oz. STEERING ARM BOLT KIT: Complete for 1 side - 1960-69 Cars "Gr 8" C4775 6 oz./set 1961-65 Vans "Gr 8" C4770 6 oz./set TIE ROD CLAMP BOLT KIT: Enough for 1 clamp (1 B, 1 LW, 1 N). 4 needed per car. 1960-69 Cars & Vans "Gr 5" C2146 2 oz./set 1960-69 Cars & Vans "Gr 8" C2147 2 oz./set IDLER ARM ATTACHING BOLT SET: 1960-69 Cars - enough to attach arm to "frame" (2 B, 2 LW, 2 N) "Gr 8" C2136 4 oz./set 1961-65 FC (Vans) - attaches idler arm to frame (2 B, 2 LW, 2 N) C6856 6 oz./set PITMAN ARM TO BOX SHAFT: 1960-69 All - Nut and washer set - C2145 4 oz./set IDLER ARM NUT: 1960-69 Cars & Vans. C2144 2 oz. SLOTTED NUTS: 1960-69 - These slotted nuts are for tie rod ends. Also attach transmission mounts to front transmission support. C726 1 oz. COTTER PIN: 1960-69 - Set of 5 - For tie rod ends and idler arms - C2199 2 oz./set STAINLESS: C3106 2 oz./set CONTROL ROD BOLT KIT: Holds rod to A-arm (studs available above). Sold set for 1 side. 1960-69 Cars C4750 4 oz. SPEEDOMETER CABLE BRACKET TO BACKING PLATE: 1965-69 All - 2 stainless bolts - C2142 2 oz. SPEEDOMETER CABLE BRACKET TO BODY BOLT: 1965-69 - C5363 2 oz.C632RC3142
Next
Search In Corvair Catalog Content
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2019 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498