Home Order Catalog Online Catalog New Items Contact Us

i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
182
ENGINE BLOCK HARDWARE
BELL HOUSING TO BLOCK: 9 bolts & 9 flat washers. 1960-69 “Gr 5” C4762 8 oz./set (see box for installation notes)
BELL HOUSING TO DIFFERENTIAL: 1960-69. 7 special bolts to attach bell housing to differential & to attach starter. C4763 8 oz./set
BLOCK BOLTS & NUTS: See page 10 (#5)
CRANK PULLEY BOLT: "Gr 8" C6106 4 oz.
A/C & SMOG PULLEY BOLT C1770R 4 oz.
CRANK PULLEY SPECIAL WASHER C1135 4 oz.
DISTRIBUTOR HOLD DOWN NUT: 1960-69. C4630 1 oz.
DISTRIBUTOR CLAMP STUD: 1960-69 standard. C2039 2 oz.
FAN IDLER PULLEY: Bolt, nut, washer. C4629 2 oz.
FAN PULLEY BOLT SET: See USED page 346, #15.
FAN IDLE PULLEY STUD: 1960-69 standard studs (if stripped, see inserts – page 174) C2034 2 oz.
OIL COOLER ADAPTOR TO BLOCK: Set of 2 bolts & 2 FW. C5115 4 oz./set
OIL COOLER BOLT 2 Plate Cooler: C6810 2 oz. 8 Plate Cooler: C3708 4 oz.
4 Plate Cooler: C6811 4 oz. 12 Plate Cooler: C3709 4 oz.
Folded Fin Cooler - C3708 4 oz.
OIL FILTER ADAPTOR PLATE: Set of Bolts – "Gr 5"
1960-64: C4761E 1965-69: C4761 4 oz./set
SERRATED – SELF LOCKING: 1960-64: C7732E 1965-69: C7732 4 oz /set
OIL FILTER BOLT: (Also holds A/C & smog filter adaptor.) 4 oz. REPRO C977A NOS C977
OIL FILTER BOLT with A/C & smog: 4 oz. REPRO C978A NOS C978
OIL PICK-UP SCREEN BOLTS: Oil Screen Clamp Bolt. C6433 1 oz. Oil Screen Clamp to Block Bolt: C6434 1 oz.
OIL PUMP COVER BOLTS: Set of 6 bolts. "Gr 5" C3530 4 oz./set
REAR BLOCK STUDS – NUTS & WASHERS: Set of 4 for the rear block studs. Hold on rear motor mount bracket. C7465 2 oz./set
REAR ENGINE HOUSING BOLTS: 1960-69 All. Full set of 7 bolts & washers for the rear engine (crank pulley housing). Includes the 4 nuts & washers for bottom studs where
the motor mount bracket mounts. C7265 8 oz./set
VENT TUBE CLAMP to HOUSING BOLT C7464 2 oz.
BELL HOUSING TO BLOCK BOLTS – INSTALLATION
1961-69 STANDARDS
#1 and #2 long bolt (1 13/16) with shoulder and NO washer
#3 and #4 short bolt (1 9/16) NO washer
#5 thru #9 short bolt (1 9/16) WITH flat washer (0.070” thick)
ALL POWERGLIDES USE WASHERS ON ALL BOLTS.
HEAD & EXHAUST HARDWARE
CARBURETOR STUDS: (oversize .003) are only needed if standard stud turns too easily.
Not for pulled out threads (see inserts page 174). 3¼" and 4¾" are the common lengths.
ROCKER ARM STUDS: Race quality. 3/8" longer for use with stock rocker arms or race type locks.
Work with all valve covers. C9295 4 oz. ea.
ROCKER ARM NUTS ONLY: Stock Style – Self locking nuts should be replaced or they could loosen.
EACH – C1157 1 oz. ea.
Set of 12 – C1157A 8 oz./set
VALVE COVER BOLTS: Sold set of 4 for 1 stock cover. STEEL: C4469 4 oz./set STAINLESS: C1090 4 oz./set
Set/4 Bolts for CLARK Cover (1 side): C6909C 4 oz. Set/4 Bolts for OTTO Cover (1 side): C6909 4 oz.
MANIFOLD STUDS: Stainless steel are highly recommended. All come with brass nuts. Set of 4 = enough for 2 manifolds.
SET OF 4 with BRASS NUTS SET OF 2 with BR ASS NUTS
STAINLESS C900 8 oz. /set C900X 4 oz. /set
REGULAR STEEL C2040 8 oz./set C2040X 4 oz./set
BRASS NUTS ONLY C900B 2 oz./set
LENGTH STANDARD .003 OVERSIZE
3 1/4" C1039 3 oz. C4634 3 oz.
4 3/4" C1040 4 oz. C9400 4 oz.
MANIFOLD NUTS: Exhaust manifold clamp – for studs that hold manifold to head.
STAINLESS STEEL: Set of 6 C1159 2 oz./set
REGULAR STEEL: Set of 6 C1159A 2 oz./set
REGULAR STEEL: Individual C1159XA ½ oz. ea.
MANIFOLD CLAMP NUT LOCKS: Original style lock for all years to hold manifold
clamp nuts tight. Bend over tabs to "lock". C388 ½ oz. ea.
MANIFOLD CLAMP STUD: 1960-69 steel standard size. C1158X 4 oz. ea.
MANIFOLD BOLT KITS: When drilling & tapping holes is impossible. These bolts & nuts are the right length to allow you to just drill a hole and stick bolts completely through
instead of using studs. Kit #1 is recommended. Kits are enough for 1 manifold.
KIT #1: Holes must be quite good and straight. Nut sizes can be hard to tighten, but this is the strongest bolt kit. C2120 4 oz.
KIT #2: Weaker, but easier to install. Allows for badly drilled or aligned holes. C2119 4 oz.
MUFFLER HANGER SUPPORT SQUARE BOLT SET: Replace muffler hanger rubber support squares using bolts & self-locking nuts instead of rivets.
Set of 4 bolts & nuts for 1 hanger. C6176 2 oz./set
MUFFLER STRAP TO HANGER BOLT: Stainless highly recommended.
STEEL STAINLESS STEEL
1960-63 Cars (exc. Turbo) C4527 2 oz. C2115 2 oz.
1961-65 FC – Special bolt with nut C905 4 oz. none
1964-69 All Cars Right & Left sides (exc. Turbo) C4530 2 oz. C2118 2 oz.
1962-64 Turbo (for substitute hanger) C4530 2 oz. C2118 2 oz.
1962-64 Turbo (with original hanger) C4528 2 oz. C2116 2 oz.
1965-66 Turbo (set of 2) C4531 2 oz./set C1092 2 oz./set
OIL PAN BOLTS: For all ALUMINUM PANS. Sold in sets of 10 or full sets of 19. Serrated washer head. 10 BOLTS: C7262 4 oz./set 19 BOLTS: C7263 8 oz./set
STOCK OIL PAN BOLTS: Full set of 19 – C981 8 oz./set Set of 2 Bolts – C9060 1 oz./set
SERRATED WASHER HEAD: Full set of 19 for stock oil pan. C7730 8 oz./set
OIL TEMP ADAPTOR: Allows you to install our oil temperature heat sender unit into Otto oil pan. C5628 1 oz.
CONNECTING ROD NUTS & BOLTS – See page 7B
"LOWER END" HARDWARE
Pages 175-185
Not all bolts and fasteners are listed
on these pages; see specific systems
sections for additional listings.
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**182ENGINE BLOCK HARDWAREBELL HOUSING TO BLOCK: 9 bolts & 9 flat washers. 1960-69 "Gr 5" C4762 8 oz./set (see box for installation notes)BELL HOUSING TO DIFFERENTIAL: 1960-69. 7 special bolts to attach bell housing to differential & to attach starter. C4763 8 oz./setBLOCK BOLTS & NUTS: See page 10 (#5)CRANK PULLEY BOLT: "Gr 8" C6106 4 oz. A/C & SMOG PULLEY BOLT C1770R 4 oz.CRANK PULLEY SPECIAL WASHER C1135 4 oz. DISTRIBUTOR HOLD DOWN NUT: 1960-69. C4630 1 oz. DISTRIBUTOR CLAMP STUD: 1960-69 standard. C2039 2 oz.FAN IDLER PULLEY: Bolt, nut, washer. C4629 2 oz.FAN PULLEY BOLT SET: See USED page 346, #15.FAN IDLE PULLEY STUD: 1960-69 standard studs (if stripped, see inserts - page 174) C2034 2 oz. OIL COOLER ADAPTOR TO BLOCK: Set of 2 bolts & 2 FW. C5115 4 oz./set OIL COOLER BOLT 2 Plate Cooler: C6810 2 oz. 8 Plate Cooler: C3708 4 oz. 4 Plate Cooler: C6811 4 oz. 12 Plate Cooler: C3709 4 oz. Folded Fin Cooler - C3708 4 oz.OIL FILTER ADAPTOR PLATE: Set of Bolts - "Gr 5" 1960-64: C4761E 1965-69: C4761 4 oz./set SERRATED - SELF LOCKING: 1960-64: C7732E 1965-69: C7732 4 oz /set OIL FILTER BOLT: (Also holds A/C & smog filter adaptor.) 4 oz. REPRO C977A NOS C977 OIL FILTER BOLT with A/C & smog: 4 oz. REPRO C978A NOS C978OIL PICK-UP SCREEN BOLTS: Oil Screen Clamp Bolt. C6433 1 oz. Oil Screen Clamp to Block Bolt: C6434 1 oz. OIL PUMP COVER BOLTS: Set of 6 bolts. "Gr 5" C3530 4 oz./setREAR BLOCK STUDS - NUTS & WASHERS: Set of 4 for the rear block studs. Hold on rear motor mount bracket. C7465 2 oz./setREAR ENGINE HOUSING BOLTS: 1960-69 All. Full set of 7 bolts & washers for the rear engine (crank pulley housing). Includes the 4 nuts & washers for bottom studs where the motor mount bracket mounts. C7265 8 oz./setVENT TUBE CLAMP to HOUSING BOLT C7464 2 oz.BELL HOUSING TO BLOCK BOLTS - INSTALLATION1961-69 STANDARDS #1 and #2 long bolt (1 13/16) with shoulder and NO washer #3 and #4 short bolt (1 9/16) NO washer #5 thru #9 short bolt (1 9/16) WITH flat washer (0.070" thick)ALL POWERGLIDES USE WASHERS ON ALL BOLTS.HEAD & EXHAUST HARDWARECARBURETOR STUDS: (oversize .003) are only needed if standard stud turns too easily. Not for pulled out threads (see inserts page 174). 3 1/4 " and 4 3/4 " are the common lengths.ROCKER ARM STUDS: Race quality. 3/8" longer for use with stock rocker arms or race type locks. Work with all valve covers. C9295 4 oz. ea.ROCKER ARM NUTS ONLY: Stock Style - Self locking nuts should be replaced or they could loosen. EACH - C1157 1 oz. ea. Set of 12 - C1157A 8 oz./setVALVE COVER BOLTS: Sold set of 4 for 1 stock cover. STEEL: C4469 4 oz./set STAINLESS: C1090 4 oz./set Set/4 Bolts for CLARK Cover (1 side): C6909C 4 oz. Set/4 Bolts for OTTO Cover (1 side): C6909 4 oz.MANIFOLD STUDS: Stainless steel are highly recommended. All come with brass nuts. Set of 4 = enough for 2 manifolds.SET OF 4 with BRASS NUTS SET OF 2 with BR ASS NUTSSTAINLESS C900 8 oz. /set C900X 4 oz. /setREGULAR STEEL C2040 8 oz./set C2040X 4 oz./setBRASS NUTS ONLY C900B 2 oz./setLENGTH STANDARD .003 OVERSIZE3 1/4" C1039 3 oz. C4634 3 oz.4 3/4" C1040 4 oz. C9400 4 oz.MANIFOLD NUTS: Exhaust manifold clamp - for studs that hold manifold to head. STAINLESS STEEL: Set of 6 C1159 2 oz./set REGULAR STEEL: Set of 6 C1159A 2 oz./set REGULAR STEEL: Individual C1159XA 1/2 oz. ea.MANIFOLD CLAMP NUT LOCKS: Original style lock for all years to hold manifold clamp nuts tight. Bend over tabs to "lock". C388 1/2 oz. ea.MANIFOLD CLAMP STUD: 1960-69 steel standard size. C1158X 4 oz. ea.MANIFOLD BOLT KITS: When drilling & tapping holes is impossible. These bolts & nuts are the right length to allow you to just drill a hole and stick bolts completely through instead of using studs. Kit #1 is recommended. Kits are enough for 1 manifold. KIT #1: Holes must be quite good and straight. Nut sizes can be hard to tighten, but this is the strongest bolt kit. C2120 4 oz. KIT #2: Weaker, but easier to install. Allows for badly drilled or aligned holes. C2119 4 oz.MUFFLER HANGER SUPPORT SQUARE BOLT SET: Replace muffler hanger rubber support squares using bolts & self-locking nuts instead of rivets. Set of 4 bolts & nuts for 1 hanger. C6176 2 oz./setMUFFLER STRAP TO HANGER BOLT: Stainless highly recommended.STEEL STAINLESS STEEL1960-63 Cars (exc. Turbo) C4527 2 oz. C2115 2 oz.1961-65 FC - Special bolt with nut C905 4 oz. none1964-69 All Cars Right & Left sides (exc. Turbo) C4530 2 oz. C2118 2 oz.1962-64 Turbo (for substitute hanger) C4530 2 oz. C2118 2 oz.1962-64 Turbo (with original hanger) C4528 2 oz. C2116 2 oz.1965-66 Turbo (set of 2) C4531 2 oz./set C1092 2 oz./setOIL PAN BOLTS: For all ALUMINUM PANS. Sold in sets of 10 or full sets of 19. Serrated washer head. 10 BOLTS: C7262 4 oz./set 19 BOLTS: C7263 8 oz./set STOCK OIL PAN BOLTS: Full set of 19 - C981 8 oz./set Set of 2 Bolts - C9060 1 oz./set SERRATED WASHER HEAD: Full set of 19 for stock oil pan. C7730 8 oz./setOIL TEMP ADAPTOR: Allows you to install our oil temperature heat sender unit into Otto oil pan. C5628 1 oz.CONNECTING ROD NUTS & BOLTS - See page 7B"LOWER END" HARDWAREPages 175-185Not all bolts and fasteners are listed on these pages; see specific systems sections for additional listings.
Search In Corvair Catalog Content
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2022 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498