Home Order Catalog Online Catalog New Items Contact Us
 Prev 
i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
179B
REAR MOTOR MOUNT HARDWARE
1960 Car & 61-65 FC (Vans) Bolt C1585 4 oz.
1961-64 Cars Bolt – 2 needed. “Gr 8” C2162 4 oz. ea.
1965-69 Cars Bolts – Set of 4 bolts, 4 FW “Gr 8” C2163 2 oz./set
1965-69 Cars – Nuts (set/2) C1224 2 oz./set
1965-69 Cars – Washer C1590 4 oz.
TRANS MOUNT HARDWARE
CROSSMEMBER KIT: Enough to bolt 1 mount to the crossmember.
1960-69 Cars & FC (Vans) – 2 bolts, 2 LW, 2 nuts – “Gr 8”
C3546 4 oz./set
CASTLE NUT: for 1960-69 trans mounts. C726 1 oz.
1961–62 FC Trans Mount “Bushing”: See page 167A for diagram.
“A” “Bushings” sold each. 2 Needed. C7421 1 lb. ea.
“B” Bolt Set for One Bushing (2 bolts, 2 LW, 2 FW) C7422 4 oz./set
“C” Washers for One Bushing (8 FW) C7423 2 oz./set
1960-64 REAR SUSPENSION HARDWARE
Also see pages 160-161
Rear Crossmember Attaching Bolts: 1961-64 cars
LONGER BOLT: (2 required) "Gr 8" (1 Bolt, 1 LW) C3544 4 oz.
SHORTER BOLT: (2 required) "Gr 8" (1 Bolt, 1 LW,1 FW) C3545 4 oz.
1960 Cars & 1961-65 Vans: "FRONT" LONGER BOLT (2 required) "Gr 8"
(1 Bolt, 1 LW,1 FW) – C4759 4 oz. (1/2" shorter than original-works OK)
"REAR" SHORTER BOLT: (2 required) "Gr 8"
(1 Bolt, 1 LW ,1 FW) C3545 4 oz.
Rear Lower A-Arm To Crossmember: 1960-64 Cars & 1961-65 Vans – Kit enough for 1 arm
(5 B, 4 LW, 4 N-includes 1 longer bolt for cars) "Gr 8" C2158 6 oz./set
BOLTS: Hold bushings in end of the lower A-Arms (2 B, 2 LW) C4757 2 oz.
Washer C4617 4 oz.
AXLE END BOLT: Holds flange on 1960-64 (bolt & washer) "Gr 8" C3159 2 oz./set
1965-69 REAR SUSPENSION HARDWARE
PICTURE #
1. BRAKE PLATE STUDS C2885R 4 oz. ea.
NUTS & LOCK WASHER SET – Set/4 for brake plate studs. C2885A 2 oz./set
2. TORQUE ARM BOLT SET: 2 needed (1 bolt, 1 LW, 1 nut)
"Gr 8": C3160 6 oz./set
3. TORQUE ARM BRACKET to BODY SET: 4 needed (1 = 2 bolts, 2 FW)
"Gr 8": C2165 4 oz./set
4. BRACKET SUPPORT KIT: 2 needed (2 bolt, 2 LW, 2 FW, 2 nuts)
"Gr 8": C2167 6 oz./set
5. CROSSMEMBER to BRACKET BOLT SET: 2 needed (1 bolt, 1 LW, 1 FW, 1 nut)
"Gr 8": C2169 6 oz./set
6. EMERGENCY CABLE BRACKET to CROSSMEMBER: 1 set needed (2 bolts, 2 FW)
"Gr 5": C2170 4 oz./set
7. "STABILIZER ROD" BRACKET to TRANSMISSION SUPPORT: 1 set needed (2 bolts, 2 LW, 2 FW, 2 nuts)
"Gr 8": C2172 4 oz./set
"STABILIZER ROD" NUTS: 2 sets needed. Sold set/4 nuts. 2 oz./set
Steel: C4597 Stainless Steel: C4598
STRUT ROD BRACKET to CROSSMEMBER BOLTS: 1 set needed.
(2 bolts, 2 LW, 2 nuts) "Gr 5": C2170A 4 oz./set
STRUT ROD BRACKET to DIFFERENTIAL BOLTS: 2 sets needed.
(1 = 4 bolts, 4 LW) "Gr 8": C2173 3 oz./set
OUTER STRUT ADJUSTING BOLT: for camber adjusting. 2 needed.
(1bolt, 2 special washers, 2 cam washers, 1 LW, 1 special nut) C638A 8 oz. ea.
INNER STRUT ADJUSTING BOLT: 2 needed (1 bolt, 2 special washers, 1 nut). C4605W 8 oz. ea.
1964 Rear Leaf Spring
Hardware – Also see page 162
BOLT & BUSHING KIT: 1 bolt, 2 special washers, 1 nut, 1 cotter
pin w/ 2 bushings. (2 needed per car). C46RC 1 lb. ea.
UPPER TRIANGULAR RETAINER NUTS & LW: Set/3 nuts, 3 LW
for 1 side. C4937 2 oz./set
CENTER SUPPORT BOLTS & LW: Set/2 bolts, 2 LW)
C2164 4 oz./set
BOLTS – UNIVERSAL JOINTS SEE PAGE 123, #4
UNIVERSAL JOINTS
Universal joints have small roller bearings that eventually wear. As the wear gets worse it allows
the drive shafts to wobble. When starting and stopping, a clunking can often be heard. These are
PREMIUM quality universal joints.
1960-64 uses (2) 1965-69 uses (4)
Both PREMIUM universal joints are forged with maximum size trunions and grease fittings.
FIT ALL CORVAIRS.
HEAVY DUTY: C3463 1 lb.
EXTRA HEAVY DUTY – PERFORMANCE: C11425 1 lb.
Designed for the extreme loads of Big V-8's but an exact fit for your Corvair!
All surfaces are precision ground and black parkerized.
The BEST you can buy.
Limited lifetime warranty on materials and workmanship.
Greasing Tool – A Must! C3592 10 oz.
See Rebuilt Axle Yokes for
1960-64 on page 157B
& 1965-69 Drive Shafts
on page 125 (#47)
C638A
C3463
C11425
page 123
Also see pgs. 163-164
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**179BREAR MOTOR MOUNT HARDWARE1960 Car & 61-65 FC (Vans) Bolt C1585 4 oz.1961-64 Cars Bolt - 2 needed. "Gr 8" C2162 4 oz. ea.1965-69 Cars Bolts - Set of 4 bolts, 4 FW "Gr 8" C2163 2 oz./set 1965-69 Cars - Nuts (set/2) C1224 2 oz./set 1965-69 Cars - Washer C1590 4 oz.TRANS MOUNT HARDWARE CROSSMEMBER KIT: Enough to bolt 1 mount to the crossmember. 1960-69 Cars & FC (Vans) - 2 bolts, 2 LW, 2 nuts - "Gr 8" C3546 4 oz./set CASTLE NUT: for 1960-69 trans mounts. C726 1 oz. 1961-62 FC Trans Mount "Bushing": See page 167A for diagram."A" "Bushings" sold each. 2 Needed. C7421 1 lb. ea."B" Bolt Set for One Bushing (2 bolts, 2 LW, 2 FW) C7422 4 oz./set"C" Washers for One Bushing (8 FW) C7423 2 oz./set1960-64 REAR SUSPENSION HARDWAREAlso see pages 160-161Rear Crossmember Attaching Bolts: 1961-64 cars LONGER BOLT: (2 required) "Gr 8" (1 Bolt, 1 LW) C3544 4 oz. SHORTER BOLT: (2 required) "Gr 8" (1 Bolt, 1 LW,1 FW) C3545 4 oz. 1960 Cars & 1961-65 Vans: "FRONT" LONGER BOLT (2 required) "Gr 8" (1 Bolt, 1 LW,1 FW) - C4759 4 oz. (1/2" shorter than original-works OK) "REAR" SHORTER BOLT: (2 required) "Gr 8" (1 Bolt, 1 LW ,1 FW) C3545 4 oz.Rear Lower A-Arm To Crossmember: 1960-64 Cars & 1961-65 Vans - Kit enough for 1 arm (5 B, 4 LW, 4 N-includes 1 longer bolt for cars) "Gr 8" C2158 6 oz./set BOLTS: Hold bushings in end of the lower A-Arms (2 B, 2 LW) C4757 2 oz. Washer C4617 4 oz.AXLE END BOLT: Holds flange on 1960-64 (bolt & washer) "Gr 8" C3159 2 oz./set1965-69 REAR SUSPENSION HARDWAREPICTURE # 1. BRAKE PLATE STUDS C2885R 4 oz. ea. NUTS & LOCK WASHER SET - Set/4 for brake plate studs. C2885A 2 oz./set2. TORQUE ARM BOLT SET: 2 needed (1 bolt, 1 LW, 1 nut) "Gr 8": C3160 6 oz./set3. TORQUE ARM BRACKET to BODY SET: 4 needed (1 = 2 bolts, 2 FW) "Gr 8": C2165 4 oz./set4. BRACKET SUPPORT KIT: 2 needed (2 bolt, 2 LW, 2 FW, 2 nuts) "Gr 8": C2167 6 oz./set5. CROSSMEMBER to BRACKET BOLT SET: 2 needed (1 bolt, 1 LW, 1 FW, 1 nut) "Gr 8": C2169 6 oz./set6. EMERGENCY CABLE BRACKET to CROSSMEMBER: 1 set needed (2 bolts, 2 FW) "Gr 5": C2170 4 oz./set7. "STABILIZER ROD" BRACKET to TRANSMISSION SUPPORT: 1 set needed (2 bolts, 2 LW, 2 FW, 2 nuts) "Gr 8": C2172 4 oz./set "STABILIZER ROD" NUTS: 2 sets needed. Sold set/4 nuts. 2 oz./set Steel: C4597 Stainless Steel: C4598 STRUT ROD BRACKET to CROSSMEMBER BOLTS: 1 set needed. (2 bolts, 2 LW, 2 nuts) "Gr 5": C2170A 4 oz./set STRUT ROD BRACKET to DIFFERENTIAL BOLTS: 2 sets needed. (1 = 4 bolts, 4 LW) "Gr 8": C2173 3 oz./set OUTER STRUT ADJUSTING BOLT: for camber adjusting. 2 needed. (1bolt, 2 special washers, 2 cam washers, 1 LW, 1 special nut) C638A 8 oz. ea. INNER STRUT ADJUSTING BOLT: 2 needed (1 bolt, 2 special washers, 1 nut). C4605W 8 oz. ea.1964 Rear Leaf Spring Hardware - Also see page 162BOLT & BUSHING KIT: 1 bolt, 2 special washers, 1 nut, 1 cotter pin w/ 2 bushings. (2 needed per car). C46RC 1 lb. ea. UPPER TRIANGULAR RETAINER NUTS & LW: Set/3 nuts, 3 LW for 1 side. C4937 2 oz./set CENTER SUPPORT BOLTS & LW: Set/2 bolts, 2 LW) C2164 4 oz./setBOLTS - UNIVERSAL JOINTS SEE PAGE 123, #4UNIVERSAL JOINTSUniversal joints have small roller bearings that eventually wear. As the wear gets worse it allows the drive shafts to wobble. When starting and stopping, a clunking can often be heard. These are PREMIUM quality universal joints. 1960-64 uses (2) 1965-69 uses (4)Both PREMIUM universal joints are forged with maximum size trunions and grease fittings. FIT ALL CORVAIRS. HEAVY DUTY: C3463 1 lb. EXTRA HEAVY DUTY - PERFORMANCE: C11425 1 lb.Designed for the extreme loads of Big V-8's but an exact fit for your Corvair! All surfaces are precision ground and black parkerized. The BEST you can buy.Limited lifetime warranty on materials and workmanship.Greasing Tool - A Must! C3592 10 oz.See Rebuilt Axle Yokes for 1960-64 on page 157B& 1965-69 Drive Shafts on page 125 (#47)C638AC3463C11425page 123Also see pgs. 163-164
Next
Search In Corvair Catalog Content
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2019 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498