Clark's Corvair Parts, Inc. - Corvair Parts Catalog - Over 12,000 parts

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

1965-69

CARS

160

ENGINE MOUNTS (TRANS. MOUNTS – See pg. 167A)

ENGINE – At the back of the car by the fan pulley. Rubber bonded to metal that can crack, rot, and weaken with age. It is all that holds rear of engine up!

NOTE: 1965-69 – A lot has been written about the superior 1965 style being better, but our own experience has shown they are more prone to

failure that is difﬁcult to detect because the bonded part is hidden from view. Also note that the 1966-69 style (shown below) has a positive steel

safety rod there in case of failure.

TRANS. – 2 transmission mounts at the front of the transmission makes up the rest of the mounting system. Order bolts too! Check mounts for cracks in the

rubber or a collapsed state that allows transmission to tilt.

1960 Cars & 61-65 FC (Vans)

ENGINE (MOTOR) MOUNTS

PICTURE # Disc. parts – see "NOS" on website

5. NUT C726 1 oz.

15. COTTER PIN C6443 1/2 oz.

SET of 5 C726A 2 oz./set

16. WASHER C4724 2 oz.

17. BOLT C1585 4 oz.

18. RETAINER C1586 Discontinued

18a. RETAINER C1588 Discontinued

18b. RETAINER C1589 Discontinued

19. RUBBER MOUNT (Upper) – Reproduction C1144T 6 oz.

20. SLEEVE C1587 4 oz.

21. RUBBER MOUNT (Bottom) C1144B 4 oz.

22. WASHER – See "F" Below C4726 2 oz.

NEW REAR MOTOR MOUNTS

1961-64 CARS – NEW MOTOR MOUNTS: Factory controlled production, no cores to return

and cost less than rebuilds! Also see Multi-Kits – Blue page MK-14.

1961-63 cars (exc. A/C) C8056R 4 lbs.

1961-63 Cars with A/C C8056AR 4 lbs.

1964 Cars All C8057R 4 lbs.

1961-64 HARDWARE

A – BOLTS: Hold mount to body. 2 needed.

1961-64 Cars "Gr 8" C2162 4 oz. ea.

B – NUT for BOTTOM STUD C726 1 oz.

C – COTTER PIN for NUT C6443 ½ oz. .

D – MOTOR MOUNT INTERIOR SPACER: 1961-64 – keeps mounting bolts from

collapsing mount. REPRO C12876 4 oz.

E – MOUNT PLATE: 1961-64 – often missing. REPRO 1961-63 C12878 4 oz.

1964 C12877 4 oz.

F – WASHER: An important washer! (Don't use standard washers – way undersized and too thin). Even most original washers are bent & distorted.

Our new washer is correct thickness for all 61-64 Cars and 61-65 FC. ¼" larger od. for 1964 Cars & ½" smaller od. for 1960 Cars & 61-65 FC,

but excellent replacement for all. Mount Washer (1-¼" od., 7/16" id., x 9/64 ") C4726 2 oz.

1965-69 CARS – NEW MOTOR MOUNTS: Factory controlled production, no cores to return and cost less than rebuilds!

Also see Multi-Kits – Blue page. MK-14. NOTE: The original 1965 style will only be available as a rebuilt unit.

1965 CARS: These are quite rare as most people over the years have used the 66-69 style. If out, we will not substitute the 1966-69 style unless you

request it. Only offered as Rebuilt Unit with refundable core included in the price (we suggest New 66-69 style).

1965 REBUILT C8058 8 lbs.

1966-69 CARS: (will also ﬁt 1965's) These mounts have caused a great deal of confusion as to if they have "gone bad". Before being installed,

they have the pyramid shape. Once installed, the weight of the motor brings them down until they are just about "ﬂat" across the top.

When they are "bad", the center will be sunken down and should be replaced. New 1966-69 style (ﬁts 1965) C8059R 8 lbs.

1965-69 HARDWARE

A – SPECIAL HARDENED SELF-LOCKING NUT: Replace! Sold Set of 2 C1224 2 oz./set

B – SPECIAL WASHER FOR 2 STUDS C1590 4 oz.

C – BOLTS: Hold motor mount to body. "1" = 4 bolts ("Gr 8") and washers C2163 4 oz./set

New Non-Original MOTOR MOUNT – 65-69 Cars

Higher torque and load capacity, larger vulcanized area, slightly stiffer than original.

FAIL SAFE design. Made in U.S.A. Mounts with original hardware.

EXACT FIT. HEAVY DUT Y MOUNT C11536 6 lbs.

Jacking Note:

Lifting a Corvair by jacking under the differential or engine puts extreme

stress on the motor mounts and may cause failure of even new mounts.

MULTI-KITS

see Blue pg. MK-14

1961-64

CARS

1965-69 Mount bolts (C) to

frame only torque to 30 ft. lb.

– bottom nuts to 40 ft. lb.

C11536

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**1965-691965-69 CARS160ENGINE MOUNTS (TRANS. MOUNTS - See pg. 167A)ENGINE - At the back of the car by the fan pulley. Rubber bonded to metal that can crack, rot, and weaken with age. It is all that holds rear of engine up! NOTE: 1965-69 - A lot has been written about the superior 1965 style being better, but our own experience has shown they are more prone to failure that is difficult to detect because the bonded part is hidden from view. Also note that the 1966-69 style (shown below) has a positive steel safety rod there in case of failure.TRANS. - 2 transmission mounts at the front of the transmission makes up the rest of the mounting system. Order bolts too! Check mounts for cracks in the rubber or a collapsed state that allows transmission to tilt.1960 Cars & 61-65 FC (Vans)ENGINE (MOTOR) MOUNTS PICTURE # Disc. parts - see "NOS" on website 5. NUT C726 1 oz.15. COTTER PIN C6443 1/2 oz. SET of 5 C726A 2 oz./set16. WASHER C4724 2 oz.17. BOLT C1585 4 oz.18. RETAINER C1586 Discontinued18a. RETAINER C1588 Discontinued18b. RETAINER C1589 Discontinued19. RUBBER MOUNT (Upper) - Reproduction C1144T 6 oz.20. SLEEVE C1587 4 oz.21. RUBBER MOUNT (Bottom) C1144B 4 oz.?22. WASHER - See "F" Below C4726 2 oz.NEW REAR MOTOR MOUNTS1961-64 CARS - NEW MOTOR MOUNTS: Factory controlled production, no cores to return and cost less than rebuilds! Also see Multi-Kits - Blue page MK-14. 1961-63 cars (exc. A/C) C8056R 4 lbs. 1961-63 Cars with A/C C8056AR 4 lbs. 1964 Cars All C8057R 4 lbs.1961-64 HARDWAREA - BOLTS: Hold mount to body. 2 needed. 1961-64 Cars "Gr 8" C2162 4 oz. ea.B - NUT for BOTTOM STUD C726 1 oz. C - COTTER PIN for NUT C6443 1/2 oz. .D - MOTOR MOUNT INTERIOR SPACER: 1961-64 - keeps mounting bolts from collapsing mount. REPRO C12876 4 oz.E - MOUNT PLATE: 1961-64 - often missing. REPRO 1961-63 C12878 4 oz. 1964 C12877 4 oz.?F - WASHER: An important washer! (Don't use standard washers - way undersized and too thin). Even most original washers are bent & distorted. Our new washer is correct thickness for all 61-64 Cars and 61-65 FC. 1/4 " larger od. for 1964 Cars & 1/2 " smaller od. for 1960 Cars & 61-65 FC, but excellent replacement for all. Mount Washer (1- 1/4 " od., 7/16" id., x 9/64 ") C4726 2 oz.1965-69 CARS - NEW MOTOR MOUNTS: Factory controlled production, no cores to return and cost less than rebuilds! Also see Multi-Kits - Blue page. MK-14. NOTE: The original 1965 style will only be available as a rebuilt unit. 1965 CARS: These are quite rare as most people over the years have used the 66-69 style. If out, we will not substitute the 1966-69 style unless you request it. Only offered as Rebuilt Unit with refundable core included in the price (we suggest New 66-69 style). 1965 REBUILT C8058 8 lbs.1966-69 CARS: (will also fit 1965's) These mounts have caused a great deal of confusion as to if they have "gone bad". Before being installed, they have the pyramid shape. Once installed, the weight of the motor brings them down until they are just about "flat" across the top. When they are "bad", the center will be sunken down and should be replaced. New 1966-69 style (fits 1965) C8059R 8 lbs.1965-69 HARDWAREA - SPECIAL HARDENED SELF-LOCKING NUT: Replace! Sold Set of 2 C1224 2 oz./setB - SPECIAL WASHER FOR 2 STUDS C1590 4 oz. C - BOLTS: Hold motor mount to body. "1" = 4 bolts ("Gr 8") and washers C2163 4 oz./set New Non-Original MOTOR MOUNT - 65-69 CarsHigher torque and load capacity, larger vulcanized area, slightly stiffer than original. FAIL SAFE design. Made in U.S.A. Mounts with original hardware. EXACT FIT. HEAVY DUT Y MOUNT C11536 6 lbs.Jacking Note:Lifting a Corvair by jacking under the differential or engine puts extreme stress on the motor mounts and may cause failure of even new mounts.MULTI-KITSsee Blue pg. MK-141961-64 CARS1965-69 Mount bolts (C) to frame only torque to 30 ft. lb. - bottom nuts to 40 ft. lb.C11536