Clark's Corvair Parts, Inc. - Corvair Parts Catalog - Over 12,000 parts

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

MK-13

Clark Multi-Kits

TIE ROD / IDLER ARM KITS

With 4 different levels to choose from you can order just what you need for your car. You should also check out the front suspension kits. As with all our

kits, these parts are also available individually. Pages 151-157. All bolts Grade 8.

CARS & FC (Vans)

BASIC KIT – (2) inner and (2) outer tie rod ends (with grease ﬁttings and nuts), (4) tie rod clamps and bolt kits, rubber pitman arm bushing

(FC = no pitman arm bushing).

DELUX "A" KIT – Adds the following to the BASIC KIT: greasable idler arm (with seal, plastic washer and bolts). UPGRADES the rubber

pitman arm bushing to nylon (exc. FC).

DELUX "B" KIT – Adds the following to the DELUX "A" KIT: (2) steel tie rod sleeves

ULTIMATE KIT

Cars: You get everything in the BASIC & DELUX "A" & "B" and the nylon pitman arm bushing is replaced by a rebuilt drag link with nylon bushing installed.

(refundable core included in price)

FC: You get everything in the BASIC & DELUX "A" & "B" plus the replacement steering link (from "relay arm" to pitman arm). #7 page 157.

APPLICATION 60-64 CARS 65-69 CARS 61-64 FC 65 FC

BASIC C10457 7 lbs. C10461 7 lbs. C10465 8 lbs. C10469 10 lbs.

DELUX "A" C10458 10 lbs. C10462 11 lbs. C10466 13 lbs. C10470 15 lbs.

DELUX "B" C10459 12 lbs. C10463 13 lbs. C10467 15 lbs. C10471 17 lbs.

ULTIMATE C10460 21 lbs. C10464 22 lbs. C10468 20 lbs. C10472 22 lbs.

TIE ROD KIT

These kits just have to do with the tie rods. Also see "TIE ROD/IDLER ARM KITS" above.

These kits will do 1 side. Order (2) kits for both sides.

BASIC KIT – (1) inner and (1) outer tie rod (with nuts, cotter pins & grease ﬁttings)

DELUX KIT – Same as BASIC KIT but ADDS (2) clamps and (2) grd. 8 bolt kits.

ULTIMATE KIT – Adds (1) steel tie rod sleeve to DELUX KIT.

APPLICATION 60-64 CARS 65-69 CARS 61-64 FC 65 FC (also fits 61-64)

BASIC KIT C10760 2 lbs. C10764 2 lbs. C10768 2 lbs. C10772 2 lbs.

DELUX KIT C10761 3 lbs. C10765 3 lbs. C10769 3 lbs. C10773 3 lbs.

ULTIMATE KIT C10762 4 lbs. C10766 4 lbs. C10770 4 lbs. C10774 4 lbs.

SHIFTER KITS

These kits will restore your shifter to the tight, original factory feel. For a shorter shift

Pattern check out the quick shifter page 118. The ULTIMATE KITS are very complete

but you should still double check pages 115-118 for other parts.

BASIC KIT – CARS

60-64: One piece cast nylon bushing, repro shift coupler, pin, (retainers) and trans. shifter shaft seal.

65-69: Same as 60-64 Cars but with our brass bushing kit.

BASIC KIT – FC (VANS)

I'm sorry we do not have many parts for the FC shifter. On some FC's the shift coupler was welded on.

We suggest a repro as the pin hole will be the correct size and the rubber mounting decreases vibration.

61-63: (Shifter under seat, not through gas tank) return spring & link, repro shift coupler, pin, retainer, clamp and bolt, shifter shaft seal, coupler boot (also

consider the under seat shift boot page 116). 1961 also consider shift bushing – pg. 116.

63-65: (Shifter on ﬂoor, through gas tank) Same as 61-63 but with front nylon bushing, and snap ring.

ULTIMATE KIT – CARS

60-64: Same as BASIC KIT but machined nylon bushing replaces stock, plus shift boot and screws (rear of tunnel), shift coupler boot,

shift coupler clamp and bolt.

65-69: Same as BASIC KIT plus shift boot and screws (rear of tunnel), shift coupler boot, coupler clamp and bolt, shifter base shims

(3 thicknesses), bushings and nuts for shift stabilizer rod.

APPLICATION 60 CARS (with 60 trans.) 60-64 CARS 65-69 CARS 61-63 FC 63-65 FC

BASIC KIT C10288E 2 lbs. C10288 2 lbs. C10292 2 lbs. C10290 2 lbs. C10291 2 lbs.

ULTIMATE KIT C10289E 3 lbs. C10289 3 lbs. C10293 4 lbs. - - - - - - - - - - - - - - - - - -

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**MK-13Clark Multi-KitsTIE ROD / IDLER ARM KITSWith 4 different levels to choose from you can order just what you need for your car. You should also check out the front suspension kits. As with all our kits, these parts are also available individually. Pages 151-157. All bolts Grade 8.CARS & FC (Vans)BASIC KIT - (2) inner and (2) outer tie rod ends (with grease fittings and nuts), (4) tie rod clamps and bolt kits, rubber pitman arm bushing (FC = no pitman arm bushing).DELUX "A" KIT - Adds the following to the BASIC KIT: greasable idler arm (with seal, plastic washer and bolts). UPGRADES the rubber pitman arm bushing to nylon (exc. FC).DELUX "B" KIT - Adds the following to the DELUX "A" KIT: (2) steel tie rod sleevesULTIMATE KITCars: You get everything in the BASIC & DELUX "A" & "B" and the nylon pitman arm bushing is replaced by a rebuilt drag link with nylon bushing installed. (refundable core included in price)FC: You get everything in the BASIC & DELUX "A" & "B" plus the replacement steering link (from "relay arm" to pitman arm). #7 page 157.APPLICATION 60-64 CARS 65-69 CARS 61-64 FC 65 FCBASIC C10457 7 lbs. C10461 7 lbs. C10465 8 lbs. C10469 10 lbs.DELUX "A" C10458 10 lbs. C10462 11 lbs. C10466 13 lbs. C10470 15 lbs.DELUX "B" C10459 12 lbs. C10463 13 lbs. C10467 15 lbs. C10471 17 lbs.ULTIMATE C10460 21 lbs. C10464 22 lbs. C10468 20 lbs. C10472 22 lbs.TIE ROD KITThese kits just have to do with the tie rods. Also see "TIE ROD/IDLER ARM KITS" above.These kits will do 1 side. Order (2) kits for both sides.BASIC KIT - (1) inner and (1) outer tie rod (with nuts, cotter pins & grease fittings)DELUX KIT - Same as BASIC KIT but ADDS (2) clamps and (2) grd. 8 bolt kits.ULTIMATE KIT - Adds (1) steel tie rod sleeve to DELUX KIT.APPLICATION 60-64 CARS 65-69 CARS 61-64 FC 65 FC (also fits 61-64)BASIC KIT C10760 2 lbs. C10764 2 lbs. C10768 2 lbs. C10772 2 lbs.DELUX KIT C10761 3 lbs. C10765 3 lbs. C10769 3 lbs. C10773 3 lbs.ULTIMATE KIT C10762 4 lbs. C10766 4 lbs. C10770 4 lbs. C10774 4 lbs.SHIFTER KITSThese kits will restore your shifter to the tight, original factory feel. For a shorter shiftPattern check out the quick shifter page 118. The ULTIMATE KITS are very completebut you should still double check pages 115-118 for other parts.BASIC KIT - CARS 60-64: One piece cast nylon bushing, repro shift coupler, pin, (retainers) and trans. shifter shaft seal. 65-69: Same as 60-64 Cars but with our brass bushing kit.BASIC KIT - FC (VANS) I'm sorry we do not have many parts for the FC shifter. On some FC's the shift coupler was welded on. We suggest a repro as the pin hole will be the correct size and the rubber mounting decreases vibration. 61-63: (Shifter under seat, not through gas tank) return spring & link, repro shift coupler, pin, retainer, clamp and bolt, shifter shaft seal, coupler boot (also consider the under seat shift boot page 116). 1961 also consider shift bushing - pg. 116. 63-65: (Shifter on floor, through gas tank) Same as 61-63 but with front nylon bushing, and snap ring.ULTIMATE KIT - CARS 60-64: Same as BASIC KIT but machined nylon bushing replaces stock, plus shift boot and screws (rear of tunnel), shift coupler boot, shift coupler clamp and bolt. 65-69: Same as BASIC KIT plus shift boot and screws (rear of tunnel), shift coupler boot, coupler clamp and bolt, shifter base shims (3 thicknesses), bushings and nuts for shift stabilizer rod.APPLICATION 60 CARS (with 60 trans.) 60-64 CARS 65-69 CARS 61-63 FC 63-65 FCBASIC KIT C10288E 2 lbs. C10288 2 lbs. C10292 2 lbs. C10290 2 lbs. C10291 2 lbs.ULTIMATE KIT C10289E 3 lbs. C10289 3 lbs. C10293 4 lbs. - - - - - - - - - - - - - - - - - -