Clark's Corvair Parts, Inc. - Corvair Parts Catalog - Over 12,000 parts

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

115

FRONT

REAR

'60-64 CAR SHIFTER

CAR SHIFTER – ALL ITEMS ARE 1960-64 CAR STANDARDS (UNLESS OTHERWISE NOTED).

MULTI-KITS

see Blue pg. MK-13

PICTURE # Most Often Needed Parts

1. Knobs – Shifter: See page 119

2. Shift Base Aluminum Housing: Usually corroded away. Comes with new studs.

CHECK AVAILABILIT Y 1961-64 3 Speed with bench seats

1961-64 4 Speed – ALL

Shift Base Studs: Comes with new bases – 1960-64 All C9200 4 oz.

QUICK SHIFTER KITS – SEE PAGE 118

3. Shift Lever: See "NOS" on website

4. Seat for Shifter Spring CX5366 2 oz.

5. Spring – Shifter C3390 2 oz.

6. Cup – Shifter : USED CU1583A 2 oz.

7. Retainer – Shifter Cup C1880 2 oz.

9. Support: Front shift rod where plastic bushing goes C3820 4 oz.

10. Nuts: Set of 4 nuts for shifter base studs C4440 2 oz.

11.

Bushing: Repro Nylon front shifter rod bushing. If worn or broken, causes sloppy shifting. Precision cast. One Piece Cast Nylon Bushing C8283 2 oz.

12.

BOOT – Rear Shift Tube: Reproduced. (No metal inser t but otherwise excellent reproduction.) C97R 8 oz.

13. Clamp: Usua lly rust y C181A 4 oz.

14. Boot: Protec ts coupler C540 4 oz.

15. Pin: Coupler; wears a lot C43 2 oz.

16. Special Small Washer & Cotter Pin Set C2200 1 oz./set

17. Seal : Front of transmission. All seals as of 1/05 (sold separately or in gasket kits) are our new improved seal. It has an inner seal and an outer seal.

The outer lip helps wipe away dirt as well as serving as a second seal to prevent leakage. The I.D. is also slightly smaller for a tighter fit. Another Clark Exclusive.

C497 2 oz.

18. Shift Coupler – Original Rubber: Hole wears or rubber deteriorates. 60-64 all look like photo.

1960 C131RE 1 lb.

1961-64 C131R 1 lb.

Coupler with NYLON: Made just like our stock couplers but with a nylon inser t. This gives

very positive shifts but may allow some shifter vibration.

1961-69 CARS & 61-65 FC C131RN 1 lb.

19. Bolt Kit: For coupler C2146 2 oz.

20. Shifter Boot Screws: Set of 4 C4439E 1 oz./set

SHIFT LEVER BOOTS: '60-69 Cars

Excellent repro of this hard to ﬁnd part. The colors are not exact but are very close. 1960-69 Cars (exc. Corsa) but can be

used on Corsa in place of chrome base.

All 1 lb. ea.

Black C539 Medium Red C8460MR Saddle C8460HA

Light Blue C8460LB Dark Blue C8460MB Tan (Fawn) C8460TA

Aqua (Turq) C8460TQ

They said they couldn't get them...

Some customers have told us Repair Shops in their area refuse to work on Corvairs because "We can never get the right parts!" These customers

have indicated that they have shown the place our catalog and said they would supply the parts. The Repair Shop then agreed to work on their car.

}

C9197 1 lb.

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**115FRONTREAR'60-64 CAR SHIFTERCAR SHIFTER - ALL ITEMS ARE 1960-64 CAR STANDARDS (UNLESS OTHERWISE NOTED).MULTI-KITSsee Blue pg. MK-13PICTURE # ?Most Often Needed Parts 1. Knobs - Shifter: See page 1192. Shift Base Aluminum Housing: Usually corroded away. Comes with new studs. CHECK AVAILABILIT Y 1961-64 3 Speed with bench seats 1961-64 4 Speed - ALL Shift Base Studs: Comes with new bases - 1960-64 All C9200 4 oz. QUICK SHIFTER KITS - SEE PAGE 1183. Shift Lever: See "NOS" on website4. Seat for Shifter Spring CX5366 2 oz. 5. Spring - Shifter C3390 2 oz. 6. Cup - Shifter : USED CU1583A 2 oz. 7. Retainer - Shifter Cup C1880 2 oz. 9. Support: Front shift rod where plastic bushing goes C3820 4 oz. 10. Nuts: Set of 4 nuts for shifter base studs C4440 2 oz. ?11. Bushing: Repro Nylon front shifter rod bushing. If worn or broken, causes sloppy shifting. Precision cast. One Piece Cast Nylon Bushing C8283 2 oz.12. BOOT - Rear Shift Tube: Reproduced. (No metal inser t but otherwise excellent reproduction.) C97R 8 oz.13. Clamp: Usua lly rust y C181A 4 oz. 14. Boot: Protec ts coupler C540 4 oz. ?15. Pin: Coupler; wears a lot C43 2 oz.?16. Special Small Washer & Cotter Pin Set C2200 1 oz./set17. Seal : Front of transmission. All seals as of 1/05 (sold separately or in gasket kits) are our new improved seal. It has an inner seal and an outer seal. The outer lip helps wipe away dirt as well as serving as a second seal to prevent leakage. The I.D. is also slightly smaller for a tighter fit. Another Clark Exclusive. C497 2 oz. ?18. Shift Coupler - Original Rubber: Hole wears or rubber deteriorates. 60-64 all look like photo. 1960 C131RE 1 lb. 1961-64 C131R 1 lb. Coupler with NYLON: Made just like our stock couplers but with a nylon inser t. This gives very positive shifts but may allow some shifter vibration. 1961-69 CARS & 61-65 FC C131RN 1 lb. 19. Bolt Kit: For coupler C2146 2 oz. 20. Shifter Boot Screws: Set of 4 C4439E 1 oz./set SHIFT LEVER BOOTS: '60-69 CarsExcellent repro of this hard to find part. The colors are not exact but are very close. 1960-69 Cars (exc. Corsa) but can be used on Corsa in place of chrome base.All 1 lb. ea. Black C539 Medium Red C8460MR Saddle C8460HA Light Blue C8460LB Dark Blue C8460MB Tan (Fawn) C8460TA Aqua (Turq) C8460TQThey said they couldn't get them...Some customers have told us Repair Shops in their area refuse to work on Corvairs because "We can never get the right parts!" These customers have indicated that they have shown the place our catalog and said they would supply the parts. The Repair Shop then agreed to work on their car.}C9197 1 lb.