Corvair Parts Catalog Engine Removal Gaskets, Crankshaft Seals, Push Rod Tube O-Rings pg 4

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

VITON O-RINGS

VITON is a trade name for a rubber compound that: (A) resists the tendency to “set” to the installed shape; (B) firmer than original rubber seals; (C) high heat

resistance – has maximum temperature of about 450°-500° (that’s 100-150° higher than original GM o-rings); (D) very resistant to oil and fuel (we are also

offering Sillcone, although it does have a higher temperature range, it is not as oil resistant as VITON). We purchase 1,000s of top quality VITON o-rings at a

time and pass the savings onto you. We sell BROWN VITON o-rings so you will never get them mixed up. Also available individually if you lose one.

ENGINE DISCOUNT !

see Blue pg. MK-2

The “I’m Just Pulling My Engine & Bellhousing” GASKET SET

For VITON bell housing seal ADD V to the end of part number. ON WEBSITE – Click on any number in the chart & the "V" option will display below.

See pg. 1 to be sure you are

ordering for the correct year.

STANDARD

TRANSMISSION

POWERGLIDE *

TRANSMISSION

1960-63 ALL C9231 1 lb. C9232 1 lb.

1964-69 (except 140 HP) C9233 1 lb. C9232 1 lb.

1965-69 140 HP C9234 1 lb. C9235 1 lb.

This part number will give you the minimum seals and

gaskets you need to pull your engine and remove the

bell housing. INCLUDES: oil pan, bell housing, oil filter/

adaptor, bell housing seal, torque converter seal or input

seal and crossover packings.

*PG kits also include C878 cable o-ring.

VITON Crankshaft Seals – Add V

We now have both the BELL HOUSING and CRANK PULLEY SEALS in brown VITON. ALL CLARK KITS listed

come with the original style seals • • • BUT you may ADD V to the END OF ANY GASKET SET OR MULTI-

KIT that includes these seals and they will be VITON. l am told that most aircraft engine seals are VITON.

(Our VITON crankshaft seals are produced by our regular seal manufacturer and look just like the originals

EXCEPT that they are made with DUPONT brown VITON.) See page 7A for INDIVIDUAL SEALS.

See page 3 for correct installation of all engine seals.

PUSH TUBE & ROCKER STUD VITON O-RINGS: Set of 24 push tube and 12 rocker stud “O” rings.

CLARK VITONS

Full Set (Brown)

CLARK VITONS

1/2 Set

CLARK VITONS

Individual

SILICONE

Full Set (Red)

C4314 4 oz. C4314X 2 oz.

Rocker Stud (smaller) C4314A 1 oz.

Push Tube (larger) C4314L 1 oz.

C4310 4 oz.

TOOLS for easy removal of push tubes: See page 333.

BULK VITON O-RINGS: Viton Push Rod Tubes, 120 O-RINGS C5453 8 oz.

Viton Rocker Studs, 60 O-RINGS C5454 4 oz.

OTHER VITON SEALS: See bottom of page 7 for individual o-rings.

OIL COOLER SEALS: Viton, All 1960-69, Set of 2 C123C 2 oz./set

0-RING SEALS: Viton, Set of 3 for fuel pump, crankcase vent tube to top engine housing and for tube that fits Into that. C123B 2 oz./set

OIL FILLER TUBE 0-RING SEAL: Viton, for Vans (FC) and Wagons C47VM 1 oz.

VITON o-rings are in

many SETS.

Check rst!

4iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**VITON O-RINGSVITON is a trade name for a rubber compound that: (A) resists the tendency to "set" to the installed shape; (B) firmer than original rubber seals; (C) high heat resistance - has maximum temperature of about 450?-500? (that's 100-150? higher than original GM o-rings); (D) very resistant to oil and fuel (we are also offering Sillcone, although it does have a higher temperature range, it is not as oil resistant as VITON). We purchase 1,000s of top quality VITON o-rings at a time and pass the savings onto you. We sell BROWN VITON o-rings so you will never get them mixed up. Also available individually if you lose one. ENGINE DISCOUNT !see Blue pg. MK-2The "I'm Just Pulling My Engine & Bellhousing" GASKET SETFor VITON bell housing seal ADD V to the end of part number. ON WEBSITE - Click on any number in the chart & the "V" option will display below.See pg. 1 to be sure you are ordering for the correct year.STANDARD TRANSMISSIONPOWERGLIDE *TRANSMISSION1960-63 ALL C9231 1 lb. C9232 1 lb.1964-69 (except 140 HP) C9233 1 lb. C9232 1 lb.1965-69 140 HP C9234 1 lb. C9235 1 lb.This part number will give you the minimum seals and gaskets you need to pull your engine and remove the bell housing. INCLUDES: oil pan, bell housing, oil filter/adaptor, bell housing seal, torque converter seal or input seal and crossover packings.*PG kits also include C878 cable o-ring.VITON Crankshaft Seals - Add V We now have both the BELL HOUSING and CRANK PULLEY SEALS in brown VITON. ALL CLARK KITS listed come with the original style seals o o o BUT you may ADD V to the END OF ANY GASKET SET OR MULTI- KIT that includes these seals and they will be VITON. l am told that most aircraft engine seals are VITON. (Our VITON crankshaft seals are produced by our regular seal manufacturer and look just like the originals EXCEPT that they are made with DUPONT brown VITON.) See page 7A for INDIVIDUAL SEALS. See page 3 for correct installation of all engine seals. PUSH TUBE & ROCKER STUD VITON O-RINGS: Set of 24 push tube and 12 rocker stud "O" rings. CLARK VITONSFull Set (Brown)CLARK VITONS1/2 SetCLARK VITONSIndividualSILICONEFull Set (Red)C4314 4 oz. C4314X 2 oz.Rocker Stud (smaller) C4314A 1 oz.Push Tube (larger) C4314L 1 oz.C4310 4 oz.TOOLS for easy removal of push tubes: See page 333. BULK VITON O-RINGS: Viton Push Rod Tubes, 120 O-RINGS C5453 8 oz. Viton Rocker Studs, 60 O-RINGS C5454 4 oz.OTHER VITON SEALS: See bottom of page 7 for individual o-rings. OIL COOLER SEALS: Viton, All 1960-69, Set of 2 C123C 2 oz./set 0-RING SEALS: Viton, Set of 3 for fuel pump, crankcase vent tube to top engine housing and for tube that fits Into that. C123B 2 oz./set OIL FILLER TUBE 0-RING SEAL: Viton, for Vans (FC) and Wagons C47VM 1 oz. VITON o-rings are in many SETS.Check ?rst!