Clark's Corvair Parts, Inc. - Corvair Parts Catalog

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

157B

CLARK'S REBUILT CAR & VAN STEERING BOXES

Each box is fully disassembled and thoroughly cleaned and glass beaded. The pitman shaft, worm and “worm nut” are carefully inspected for

galling and wear. Steering Box Identiﬁcation – see page 408

Clark's then replaces ALL the following parts :

•

(2) steering gear bearings and races

•

both seals and gasket

•

(2) pitman shaft bushings (steering box body and in cover)

•

all ball bearings

Clark's

supplies:

= pitman arm nut and lock washer = steering column gasket = each box is then bench tested and adjusted and includes instructions.

= grade 8 bolts to bolt box to body = steering column felt seal (60-64)

PLEASE NOTE:

1. We do not always have these boxes in stock if we are out of cores. If you want us to rebuild YOUR box, you must send the order with YOUR used box and

indicate you want YOUR box rebuilt. Normally we can do this within several days after receipt. If you are not going to have us rebuild YOUR box, we

suggest you call to insure we have the box you need.

2. You must keep YOUR pitman arm off YOUR box (the arm that attaches to the drag link bushing).

(Need new pitman arm bushing?)

3. Your old box has a CORE VALUE (already included in the price). You will be refunded this amount when YOUR used box is received. (For FULL CORE

REFUND box MUST " turn freely" and be the same box you ordered).

CLARK'S REBUILT CAR & VAN STEERING BOXES

1960-63 Car C10864 15 lbs.

1961-63 FC C12020 20 lbs.

1964 Car (long shaft) C10865 18 lbs.

1965 Car (long shaft) C10866 18 lbs.

1965-66 Car (short shaft) C10867 15 lbs.

1967-69 Car C10868 15 lbs.

CLARK'S REBUILT FAST RATIO CAR STEERING BOXES (seldom have) (approx. 3 3/4 turns) These were

used w/ factory quick ratio steering arms (not as "fast" as our current arms). Factory arms NOT included. You can send your fast ratio box in to be

rebuilt. Cost depends on condition, but is usually close to the price listed. CORE NOTE: The core refund listed for fast ratio boxes assumes a perfect

core. The

actual amount of refund will be determined after our inspection of the fast ratio core.

1965 Fast Ratio (long shaft) C10878 18 lbs

1965-66 Fast Ratio (short shaft) C10879

15 lbs.

Seldom have - Check or send yours for rebuild.

1967-69 Fast Ratio C10880 15 lbs

CLARK CAR STEERING BOX REBUILD KITS

These Kits INCLUDE all the parts that we use in our rebuilt steering boxes: steering box seals and gaskets, pitman shaft bushing, cover bushing,

2 bearings (C1645), ball bearing set, pitman arm nut & lock washer, bolts (steering box to car), steering column gasket (60-64 also get felt seal).

With 2 Races

1960-64 Cars

C10881 1 lb. C10881R 1 lb. 4 oz.

1965-69 Cars

C10882 1 lb.

C10882R 1 lb. 4 oz.

$$ SAVER STEERING BOX REBUILD KITS

SAME as our REGULAR STEERING BOX KITS EXCEPT that instead of 2 COMPLETE NEW BEARING UNITS (C1645) we include 18 NEW balls. You can

"pop" the old balls out and insert these new ones. Personally I'd rather use NEW BEARING UNITS. All CLARK REBUILT BOXES get whole NEW BEARING

UNITS. With 2 Races

STEERING BOX KIT with BALLS INSTEAD OF (2) C1645 BEARINGS: 60-64 Cars C10881B 12 oz. C10881BR 1 lb.

65-69 Cars C10882B 12 oz. C10882BR 1 lb.

CLARK VAN (FC) STEERING BOX REBUILD KITS

This Kit will give you everything you'll normally need to rebuild any Van (FC) steering box. C11013A INCLUDES: 2 steering bearings and races, full ball set,

pitman bushings, seal and cover gasket. Add Cover Bushing

C11013A 8 oz. C11013B 1 lb.

CLARK'S Buying USED STEERING BOXES? Check with us.

Also consider a New Stock Ratio Box

See page 157A

CORE FEE

is included in Price & actual

Core is listed after price.

}

NEW REPRO STEERING BOXES

STANDARD RATIO – Pg. 157A

1964 & 65 Steering Bushings: These nylon bushings fit in the spring at the steering wheel bearing on long shaft

steering boxes to take up "play". They are often worn, brittle, broken or missing.

1964 Bushing C13278 1 oz.

1965 Bushing C13279

1 oz.

Short Tours Available!

If you are going to be in our area, we'd gladly

give you a tour! We still only allow customers

to pick up large item orders like body panels

or windshields at the door.

Shock Absorbers – See pages 137-139

Coil Springs – See page 140

Stabilizer Bars – See page 167B

}

Not for telescopic

C13278

C13279

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**157BCLARK'S REBUILT CAR & VAN STEERING BOXESEach box is fully disassembled and thoroughly cleaned and glass beaded. The pitman shaft, worm and "worm nut" are carefully inspected for galling and wear. Steering Box Identification - see page 408Clark's then replaces ALL the following parts :o (2) steering gear bearings and races o both seals and gasketo (2) pitman shaft bushings (steering box body and in cover)o all ball bearingsClark's supplies:= pitman arm nut and lock washer = steering column gasket = each box is then bench tested and adjusted and includes instructions.= grade 8 bolts to bolt box to body = steering column felt seal (60-64)PLEASE NOTE: 1. We do not always have these boxes in stock if we are out of cores. If you want us to rebuild YOUR box, you must send the order with YOUR used box and indicate you want YOUR box rebuilt. Normally we can do this within several days after receipt. If you are not going to have us rebuild YOUR box, we suggest you call to insure we have the box you need. 2. You must keep YOUR pitman arm off YOUR box (the arm that attaches to the drag link bushing). (Need new pitman arm bushing?) 3. Your old box has a CORE VALUE (already included in the price). You will be refunded this amount when YOUR used box is received. (For FULL CORE REFUND box MUST " turn freely" and be the same box you ordered).CLARK'S REBUILT CAR & VAN STEERING BOXES1960-63 Car C10864 15 lbs.1961-63 FC C12020 20 lbs.1964 Car (long shaft) C10865 18 lbs. 1965 Car (long shaft) C10866 18 lbs. 1965-66 Car (short shaft) C10867 15 lbs. 1967-69 Car C10868 15 lbs.CLARK'S REBUILT FAST RATIO CAR STEERING BOXES (seldom have) (approx. 3 3/4 turns) These were used w/ factory quick ratio steering arms (not as "fast" as our current arms). Factory arms NOT included. You can send your fast ratio box in to be rebuilt. Cost depends on condition, but is usually close to the price listed. CORE NOTE: The core refund listed for fast ratio boxes assumes a perfect core. The actual amount of refund will be determined after our inspection of the fast ratio core.1965 Fast Ratio (long shaft) C10878 18 lbs1965-66 Fast Ratio (short shaft) C1087915 lbs. Seldom have - Check or send yours for rebuild.1967-69 Fast Ratio C10880 15 lbs CLARK CAR STEERING BOX REBUILD KITSThese Kits INCLUDE all the parts that we use in our rebuilt steering boxes: steering box seals and gaskets, pitman shaft bushing, cover bushing, 2 bearings (C1645), ball bearing set, pitman arm nut & lock washer, bolts (steering box to car), steering column gasket (60-64 also get felt seal).With 2 Races1960-64 Cars C10881 1 lb. C10881R 1 lb. 4 oz.1965-69 Cars C10882 1 lb.C10882R 1 lb. 4 oz.$$ SAVER STEERING BOX REBUILD KITSSAME as our REGULAR STEERING BOX KITS EXCEPT that instead of 2 COMPLETE NEW BEARING UNITS (C1645) we include 18 NEW balls. You can "pop" the old balls out and insert these new ones. Personally I'd rather use NEW BEARING UNITS. All CLARK REBUILT BOXES get whole NEW BEARING UNITS. With 2 Races STEERING BOX KIT with BALLS INSTEAD OF (2) C1645 BEARINGS: 60-64 Cars C10881B 12 oz. C10881BR 1 lb. 65-69 Cars C10882B 12 oz. C10882BR 1 lb.CLARK VAN (FC) STEERING BOX REBUILD KITSThis Kit will give you everything you'll normally need to rebuild any Van (FC) steering box. C11013A INCLUDES: 2 steering bearings and races, full ball set, pitman bushings, seal and cover gasket. Add Cover Bushing C11013A 8 oz. C11013B 1 lb. CLARK'S Buying USED STEERING BOXES? Check with us.Also consider a New Stock Ratio Box See page 157A. CORE FEEis included in Price & actual Core is listed after price.}NEW REPRO STEERING BOXES STANDARD RATIO - Pg. 157A 1964 & 65 Steering Bushings: These nylon bushings fit in the spring at the steering wheel bearing on long shaft steering boxes to take up "play". They are often worn, brittle, broken or missing. 1964 Bushing C13278 1 oz. 1965 Bushing C13279 1 oz. Short Tours Available!If you are going to be in our area, we'd gladly give you a tour! We still only allow customers to pick up large item orders like body panels or windshields at the door. Shock Absorbers - See pages 137-139Coil Springs - See page 140Stabilizer Bars - See page 167B}Not for telescopicC13278C13279