Clark's Corvair Parts, Inc. - Corvair Parts Catalog - Over 12,000 parts

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

266

UPHOLSTERY INSTALLATION SUPPLIES

All our upholstery comes with complete instructions. The following are highly suggested items that you may want to order.

HOG RING PLIERS – These are used to attach the reproduction upholstery the same way as the originals. Generally you will need from 300-

400 clips. These PROFESSIONAL pliers really are a must. Straight ones are suggested. Bent ones also handy but not essential. ORDER HOG RINGS SEPARATELY!

PROFESSIONAL PLIERS STRAIGHT: C4879 8 oz. BENT: C6489 8 oz.

HOG RINGS:

Sold Set of 100 C4880 6 oz./set

Sold Set of 500 C4880X 1 lb.

FC (Van) UPHOLSTERY CLIPS Originals – These were used along with hog ring clips for FC in certain areas.

Sold Set of 10. C5921 1 oz./set

SEAT CLIPS – Holds pivot on the bucket seat back. "Impossible" to get off in good shape! "1" = Set of 2 1960-69 C4883 1 oz./set

SEAT WASHERS – Used between bucket seat pivot and the vinyl to prevent damage to the vinyl. Sold each.

Not original material. 2-4 needed per bucket seat depending on year. Also ﬁt Car & FC front bench seats. C4884 1 oz. ea.

FRONT SEAT ADJUSTER HELPER SPRING – 1962-69 with bucket seats – either side. C3252 4 oz.

1961-65 FC (Vans) C3247 4 oz.

UPHOLSTERY SCREWS

ORIGINAL STYLE for 1966-69: Cone washer just extends away from head of screw. Sold Set of 10. C4336 2 oz./set

OVERSIZE WASHER: Original for some 1965's – Same as C4336 but washer is slightly LARGER in case original had pulled through upholstery.

Sold Set of 10. C4337 2 oz./set

LARGER STYLE WASHER & SCREW: (see picture) Also ﬁt 1960 package area.

Set of 10 – C1216A 4 oz./set OVERSIZE SCREW (Set of 5) – C4338 2 oz./set

SEAT PIVOT CAPS – Yes! Those little chrome "caps" that ﬁt over bottom pivot on bucket seats. The ones that you usually

cuss at and bend. 2 needed per car. 1960-66

ROUND ones are EXACT REPRO – ROUND – C1748 1 oz. ea.

Seat Pivot Cap Installation Tool

This piece of tubing fits the chrome caps that fit over the pivot on the bucket seat

perfectly and installs them without damage. Very difficult to install without this tool. C6587T 4 oz.

SEAT BUMPERS –

See page 234

SEAT BUNS

SEAT EXTENDERS – For tall drivers. These only ﬁt stock bucket seats and stock bench seats. This will allow

for greater front leg room. 1 Set is enough for (1) bucket seat or (1) bench seat. Bolts to old holes and moves seat back about 3".

Adjustment still works. Does not ﬁt 1960-61 Cars or Vans. C8256 7 lbs.

SEAT "CARDBOARD" – 1962-66

NOT INCLUDED WITH UPHOLSTERY.

Bucket seats had a "cardboard" piece that helped cover sharp areas on the bottom.

Highly suggested as the old ones are usually bad. 1 needed per bucket seat. Sold each.

1962-64 – C7512 8 oz. ea. 1965-66 – C7513 10 oz. ea.

COTTON PADDING – Most bucket seats and some rear seats have sections of cotton placed over the foam at the factory. It helps to give a "full"

appearance. This cotton is usually ﬂattened and new is suggested. SEE PAGE 265A

FOAM PADDING

You may want some of this to give fullness to a seat, sound-prooﬁng, etc. The 7/16" semi-ﬁrm is most useful (the soft is too soft to give much fullness; it just collapses).

SEMI-FIRM FOAM – Sold by the square yard. 1 = 1 square yard, 2 = 36" X 72" C13085 3 lbs. Free Sample – C13086 1 oz.

SOFT FOAM – 3/4" thick, but very soft. Approximately 22-24" wide. "1" = 12" x 24"; "2" = 24" x 24"; "3" = 35" x 24", etc. C5671 8 oz./ft.

— MORE FOAM – SEE PAGE 265B —

FELT & JUTE – The felt is approx. 1/8 " thick by 24" x 56". It is used in some areas of upholstery installation as a padding.

There is also a piece of jute padding 8" x 12" which usually is not needed. C7032 1 lb.

BUCKET SEAT TRIM – Beautiful chrome repros for '60-'66 Bucket Seats

Replace those pitted, scratched or dented trim pieces. Fit outside of right & left bucket seats (sold as a pair).

These will not ﬁt the inside of seats. These qualify for the interior discount. Also order seat pivot caps (C1748) sold each.

C5349T 4 lbs./pair

GLUES – see bottom of page 268

C6587T

C1748

ALL ITEMS

Pgs. 264-288 qualify for

Interior Discount

see Blue pg. MK-2

C5349T

C4883

C4884

C7512

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**266UPHOLSTERY INSTALLATION SUPPLIESAll our upholstery comes with complete instructions. The following are highly suggested items that you may want to order.HOG RING PLIERS - These are used to attach the reproduction upholstery the same way as the originals. Generally you will need from 300-400 clips. These PROFESSIONAL pliers really are a must. Straight ones are suggested. Bent ones also handy but not essential. ORDER HOG RINGS SEPARATELY!PROFESSIONAL PLIERS STRAIGHT: C4879 8 oz. BENT: C6489 8 oz.HOG RINGS: Sold Set of 100 C4880 6 oz./set Sold Set of 500 C4880X 1 lb.FC (Van) UPHOLSTERY CLIPS Originals - These were used along with hog ring clips for FC in certain areas. Sold Set of 10. C5921 1 oz./setSEAT CLIPS - Holds pivot on the bucket seat back. "Impossible" to get off in good shape! "1" = Set of 2 1960-69 C4883 1 oz./setSEAT WASHERS - Used between bucket seat pivot and the vinyl to prevent damage to the vinyl. Sold each. Not original material. 2-4 needed per bucket seat depending on year. Also fit Car & FC front bench seats. C4884 1 oz. ea.FRONT SEAT ADJUSTER HELPER SPRING - 1962-69 with bucket seats - either side. C3252 4 oz. 1961-65 FC (Vans) C3247 4 oz.UPHOLSTERY SCREWSORIGINAL STYLE for 1966-69: Cone washer just extends away from head of screw. Sold Set of 10. C4336 2 oz./set OVERSIZE WASHER: Original for some 1965's - Same as C4336 but washer is slightly LARGER in case original had pulled through upholstery. Sold Set of 10. C4337 2 oz./setLARGER STYLE WASHER & SCREW: (see picture) Also fit 1960 package area. Set of 10 - C1216A 4 oz./set OVERSIZE SCREW (Set of 5) - C4338 2 oz./setSEAT PIVOT CAPS - Yes! Those little chrome "caps" that fit over bottom pivot on bucket seats. The ones that you usually cuss at and bend. 2 needed per car. 1960-66 ROUND ones are EXACT REPRO - ROUND - C1748 1 oz. ea.Seat Pivot Cap Installation ToolThis piece of tubing fits the chrome caps that fit over the pivot on the bucket seat perfectly and installs them without damage. Very difficult to install without this tool. C6587T 4 oz.SEAT BUMPERS - See page 234 SEAT BUNS next pageSEAT EXTENDERS - For tall drivers. These only fit stock bucket seats and stock bench seats. This will allow for greater front leg room. 1 Set is enough for (1) bucket seat or (1) bench seat. Bolts to old holes and moves seat back about 3". Adjustment still works. Does not fit 1960-61 Cars or Vans. C8256 7 lbs.R SEAT "CARDBOARD" - 1962-66 NOT INCLUDED WITH UPHOLSTERY.Bucket seats had a "cardboard" piece that helped cover sharp areas on the bottom. Highly suggested as the old ones are usually bad. 1 needed per bucket seat. Sold each. 1962-64 - C7512 8 oz. ea. 1965-66 - C7513 10 oz. ea. COTTON PADDING - Most bucket seats and some rear seats have sections of cotton placed over the foam at the factory. It helps to give a "full" appearance. This cotton is usually flattened and new is suggested. SEE PAGE 265AFOAM PADDINGYou may want some of this to give fullness to a seat, sound-proofing, etc. The 7/16" semi-firm is most useful (the soft is too soft to give much fullness; it just collapses). SEMI-FIRM FOAM - Sold by the square yard. 1 = 1 square yard, 2 = 36" X 72" C13085 3 lbs. Free Sample - C13086 1 oz. SOFT FOAM - 3/4" thick, but very soft. Approximately 22-24" wide. "1" = 12" x 24"; "2" = 24" x 24"; "3" = 35" x 24", etc. C5671 8 oz./ft. -- MORE FOAM - SEE PAGE 265B --FELT & JUTE - The felt is approx. 1/8 " thick by 24" x 56". It is used in some areas of upholstery installation as a padding. There is also a piece of jute padding 8" x 12" which usually is not needed. C7032 1 lb.BUCKET SEAT TRIM - Beautiful chrome repros for '60-'66 Bucket Seats Replace those pitted, scratched or dented trim pieces. Fit outside of right & left bucket seats (sold as a pair). These will not fit the inside of seats. These qualify for the interior discount. Also order seat pivot caps (C1748) sold each. C5349T 4 lbs./pair GLUES - see bottom of page 268j C6587TC1748ALL ITEMSPgs. 264-288 qualify for Interior Discountsee Blue pg. MK-2C5349TC4883C4884C7512