i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
184
INTERIOR HARDWARE
DOOR LOCK KNOBS: 1968-69 Non-original (similar to the 65-67 style) Only fit 68-69. C7368 1 oz. ea.
Complete KNOB Listing for 1960-67 – see page 271B
DOOR & WINDOW HANDLE CLIP: 1960-69 C2186 1 oz. Sold each.
MIRROR SCREW: The one that keeps inside rear view mirror from falling. Head usually shot! C3245 1 oz.
CLIP: Holds control cable to fresh air vent flaps – 1960-69 C740 1 oz.
’60-64 DOOR PANEL REPAIR NAILS
If you have to remove the door panels these nails often pull out. These "repair nails" consist of a ridged nail welded to a piece of bent metal.
To replace a pulled out one, just slip it in where the old one was and squeeze together. Plan on 4-5 nails per panel. Sold Set of 5 only.
Original Style C377 2 oz./set
ORIGINAL DOOR PANEL RETAINING CLIPS: 1965-69 – sold set of 10 C2188 4 oz./set.
REPLACEMENT NYLON WINDOW ROLLERS: 1965-69
These Kits allow you to replace those cracked rollers. 2 sizes were used on each door window unit.
Our C2190 roller is the larger of the 2 sizes offered but works great for all. 4 needed per side.
CLIPS – LOCK ROD – SEE PAGE 90
SCREWS: Hold "aligning wedge" to the door on 1962-69 Convertible. Heads are usually rusty. Sold Set of 2 screws for 1 door. C4329 1 oz./set
SCREWS: Hold "aligning wedge" to the body (door pillar) on 1962-69 Convertible. Heads are usually rusty. Sold Set of 2 screws for 1 door. C7302 1 oz./set
SCREWS – FC DOOR PADDED PANELS: For original panels – Set of 10 screws C11137 2 oz./set
For repro panels – Set of 10 screws C11138 2 oz./set
DOOR JAMB LIGHT SWITCH: 1960-61 ("700" & Monza) C2191X 2 oz. 1968-69 Left C7538 2 oz.
Sleeves slide to adjust to door. 1962 -69 (exc. 68-69 Lf.) C2191 2 oz.
INTERIOR PHILLIPS HEAD SCREWS: same plating as original - plain, chrome or black
ARM REST ATTACHING SCREWS: 1960-69 screws arm rest to door panel. Original size C2184 1 oz.
ARM REST PAD – SCREWS: SoId Set of 4 1960-64 C5703 1 oz./set 1965-69 C7123 1 oz./set
VENT WINDOW FRAME CHROME SCREW: Special length screws hold frame to inside door metal. Sold Set of 2.
1960- 64 All Cars C9697 1 oz./set
DASH SCREWS: For metal around the edge of the dash (near windshield) and around rear window. All 1960-64 Cars – Chrome
1960-64 Cars Chrome C1218 ½ oz. ea. 1965-69 screws are for instrument dash panel.
Set of 10 C1218A 2 oz./set
(Set of 5) 1965-69 Cars Black C7157 1 oz./set
DOOR SILL SCREWS – CHROME PLATED: Chrome Plated 1960-64 Set of 10 C1218AE 2 oz./set
1965-69 – C1218 1 oz. ea. 65-69 Set of 10 – C1218A 2 oz./set 65-69 Oversize Head & Screw – Set of 5 – C6910 1 oz./Set
SCREW FOR VANS – KICK PANEL VENTS: Sold Set of 10 C2194 1 oz. /set
FUZZIES – SCREWS: Rear Coupe & 4 Dr. 1965-69 – Sold Set of 4 C4875 2 oz./set
Rear Convertible 1965-69 – Sold Set of 6 C4876 2 oz./set
GL0VEB0X SCREWS: Used inside – 60-64 Chrome – Set of 7 C2192A 2 oz./set
Not exact originals. 60-64 Black – Set of 7 C2193A 2 oz./set
65-69 Black – Set of 5 C2193XA 2 oz./set
HEATER OUTLET SCREWS: Black original style. Hold heater outlet under rear seat. 1961-64 Cars. Sold Set of 4. C2197 2 oz./set
Chrome Screws that hold Heater Control to Dash: 1960-64 Cars and 61-65 FC. Sold set of 3.
Original size heads – C777A 2 oz. Oversize heads (end up flush with the top of holes) – C777X 2 oz.
1965-69 heater control to the dash. Sold Set of 4. C10863 1 oz.
INSTRUMENT & GL0VEB0X TRIM: Screws for metal pieces above instrument panel and glovebox. 1960-64 Cars - Chrome.
Each: C1218 ½ oz. ea. Set of 10: C1218A 2 oz. ea.
PLASTIC WINDSHIELD PILLAR SCREWS: 1965-67 Coupes & Convertibles & 1968-69 Coupes. Sold Set of 3. Chrome. 1 = enough for 1 side. C6911 ½ oz./set
SEAT BOLTS & SCREWS
CHROME PHILLIPS HEAD SCREWS: For front bucket seat side trim. Both sides. 1960-66 - Sold Set of 4 (enough for 1 seat).
Set of 4 – C4315 2 oz./set OVERSIZE (For stripped holes) – C4316 2 oz./set
BOLTS – BUCKET SEAT TO FLOOR C3700 2 oz. ea.
BUMPER SCREWS – BUCKET SEATS: Sold Set of 4. 1960-64: C4317 1 oz./set 1965-69: C4330 1 oz./set
OVERSIZE 1965-69: C4331 1 oz./set
SUNVISOR ADJUSTING AND TIGHTENING SCREW: 1961-69 Cars – Keeps sunvisor from flopping down. Slot often damaged and chrome pitted.
Sold Set of 2 – C5087 2 oz./set
SUNVISOR BASE ATTACHING SCREW: Stainless steel phillips head screw. 1960-64 (All exc. CT) and 1965-67 (All exc. CT).
Sold Set of 3. (enough for 1 side) 1960-63 (head may be smaller) – SS C8378 1 oz./set 1965-67 – chrome C7160 2 oz./set
1964 Original size screw – chrome C5088 1 oz./set
1964 Oversize screw – chrome C5089 1 oz./set
SUNVISOR BUSHINGS: These nylon bushings go where the sunvisor pivots. Old ones usually broken or missing.
NOTE: 1962-64 used these on most Monza visors.
1962-64 MONZA COUPES & CT. C7724 1 oz. ea. 1965-69 ALL COUPES & CT. C7725 1 oz. ea.
1961-62 Wagon Rear Hinge Cover Screws: Original style. Full set/16. C1438A 4 oz.
Replacement is better
than the original rollers.
1 = 1 roller & 1 rivet
C2190 2 oz. ea.
DOOR PANEL PLUGS
See Page 228
More Heater Hardware
Cars – See page 103
FC – See pages 104A & 104B
C2186
C377
C2190