Clark's Corvair Parts, Inc. - Corvair Parts Catalog

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

Starter Parts: '60-69 unless otherwise noted

PICTURE # Usually Needed Parts

21. Snap Ring – Pinion Snap: I always stretch this or lose it. C627 1 oz.

23.

Drive End Housing – with bushing – Aluminum – Non-GM

If this breaks it is usually due to: 1) A bad ring gear on the pressure plate or torque conver ter.

2) A bad starter drive.

1960 C2261 Discontinued 1961-69 C788A 1 lb.

24. Bushing – Starter Drive Nose: Wears! I suggest getting 2 if you don't have the correct tools. C626 1 oz.

.002 Undersize: Makes up for wear on the end of armature. C626X 1 oz.

25. Drive – Bendix – New Repro C192A 1 lb.

26. Assist Spring C3957 4 oz.

27. Screws: Side of star ter – hold "shoes". Set of 4. C2862 3 oz./set

28. Pole Shoes C4324 Discontinued

29. Insulators – Field Coil: 4 needed. C4326 1 oz.

31.

Commutator End Cover with Bushing: Non-GM C4323 8 oz.

Bushing: 1960-69 – Remove old bushing and install a new one in your old end cover. Standard size. C5421 2 oz.

.002 Undersize (for worn shaft) C5422 2 oz .005 Undersize (for worn shaf t) C5423 2 oz.

Starter to Bell Housing Bolts : Set of bolts to bolt up star ter. 1960-69 All. "Gr 8" C3158 4 oz./set

Starter Wires: Mini harnesses leading to starter – See page 97.

CLARK REBUILT STARTERS

As with all our rebuilt electrical parts, our star ters are 100 % disassembled and completely cleaned in our

ultrasonic cleaner. All used par ts are inspected and NEW parts are used as indicated below. We then check

each starter on our TESTER which also simulates a load and foam it in place in a new heavy duty box.

Please do your part and CHECK ALL WIRING AND YOUR BATTERY.

1960-69 PREMIUM REBUILT STARTERS – "with Solenoid"

These are Superior rebuilds. We replace washers, screws, bolts, bushings, gaskets and brushes.

You also get a NEW starter drive, NEW drive lever, NEW field coils, NEW armature, fully cleaned,

and painted black.

1961-69 ULTIMATE REBUILT STARTERS

Same as the Premium with a NEW solenoid and a NEW starter nose.

All 18 lbs. Premium with Solenoid Ultimate with Solenoid

1960 C4322AN - - - - - - - -

1961–69 C2056NA C2056PN

CORE VALUE: Return a rebuildable Corvair star ter postpaid and we will refund you

the core value listed after the part number in the Price List (LESS is refunded if

nose is broken.) NOTE: You may remove and keep the solenoid & armature to save

shipping weight.

Clark Rebuilt Starters

ALL Have NEW Field Coils & Armatures

CORES – Please Return!

The next customer needs your core.

Even if you bought a core part years ago, we still have records & will accept for full core paid at the time of purchase!

STARTER "RELAY KIT"

Starter always start? Want to be sure?

Does your Cor vair solenoid sometimes just click even though you've

replaced it & checked the wires? Does your starter just barely turn over

when hot? You receive a relay with all the wires and complete instructions.

The relay can be installed inside the engine compartment by the regulator

or on the other side of the firewall (out of sight). The relay sends a full 12V

to the starter every time. "RELAY KIT" C2056R 4 lbs.

PREMIUM & ULTIMATE STARTERS

with NEW FIELD COILS & NEW ARMATURES - Why?

We have learned that after 40-50 years of use, the old

insulation on both the field coils & armatures has deteriorated

& may fail at any time. For more details on our rebuilt starters,

go to: www.corvair.com (click on "rebuilds").

FOAMED IN PLACE

in a new strong box. Gets to you

in perfect condition and easy for

you to RETURN YOUR CORE!

Heavy Duty STARTER MOTOR – 1960-69

Whether for competition or just peace of mind for a street Cor vair, this starter will start that hard to start motor!

Bolts right in like a stock starter. 1.4 KW Nippondneso motor, 500 f t. lbs. of torque, 5 roller bearings, 4.44:1 reduction,

approximately 9 lbs., heat and water resistant, durable, compact and reliable. With instructions.

NEW not a rebuild C11114 11 lbs. (boxed)

REVERSE ROTATION or VW STARTERS – See page 327

C192A

C788A

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**86Starter Parts: '60-69 unless otherwise notedPICTURE # ?Usually Needed Parts21. Snap Ring - Pinion Snap: I always stretch this or lose it. C627 1 oz.23. Drive End Housing - with bushing - Aluminum - Non-GM If this breaks it is usually due to: 1) A bad ring gear on the pressure plate or torque conver ter. 2) A bad starter drive. 1960 C2261 Discontinued 1961-69 C788A 1 lb. ?24. Bushing - Starter Drive Nose: Wears! I suggest getting 2 if you don't have the correct tools. C626 1 oz. .002 Undersize: Makes up for wear on the end of armature. C626X 1 oz.?25. Drive - Bendix - New Repro C192A 1 lb.26. Assist Spring C3957 4 oz.27. Screws: Side of star ter - hold "shoes". Set of 4. C2862 3 oz./set28. Pole Shoes C4324 Discontinued29. Insulators - Field Coil: 4 needed. C4326 1 oz. ?31. Commutator End Cover with Bushing: Non-GM C4323 8 oz. Bushing: 1960-69 - Remove old bushing and install a new one in your old end cover. Standard size. C5421 2 oz. .002 Undersize (for worn shaft) C5422 2 oz .005 Undersize (for worn shaf t) C5423 2 oz. Starter to Bell Housing Bolts : Set of bolts to bolt up star ter. 1960-69 All. "Gr 8" C3158 4 oz./set Starter Wires: Mini harnesses leading to starter - See page 97.CLARK REBUILT STARTERSAs with all our rebuilt electrical parts, our star ters are 100 % disassembled and completely cleaned in our ultrasonic cleaner. All used par ts are inspected and NEW parts are used as indicated below. We then check each starter on our TESTER which also simulates a load and foam it in place in a new heavy duty box. Please do your part and CHECK ALL WIRING AND YOUR BATTERY.1960-69 PREMIUM REBUILT STARTERS - "with Solenoid"These are Superior rebuilds. We replace washers, screws, bolts, bushings, gaskets and brushes. You also get a NEW starter drive, NEW drive lever, NEW field coils, NEW armature, fully cleaned, and painted black. 1961-69 ULTIMATE REBUILT STARTERSSame as the Premium with a NEW solenoid and a NEW starter nose.All 18 lbs. Premium with Solenoid Ultimate with Solenoid1960 C4322AN - - - - - - - -1961-69 C2056NA C2056PNCORE VALUE: Return a rebuildable Corvair star ter postpaid and we will refund you the core value listed after the part number in the Price List (LESS is refunded if nose is broken.) NOTE: You may remove and keep the solenoid & armature to save shipping weight.Clark Rebuilt StartersALL Have NEW Field Coils & ArmaturesCORES - Please Return!The next customer needs your core.Even if you bought a core part years ago, we still have records & will accept for full core paid at the time of purchase!STARTER "RELAY KIT"Starter always start? Want to be sure?Does your Cor vair solenoid sometimes just click even though you've replaced it & checked the wires? Does your starter just barely turn over when hot? You receive a relay with all the wires and complete instructions. The relay can be installed inside the engine compartment by the regulator or on the other side of the firewall (out of sight). The relay sends a full 12V to the starter every time. "RELAY KIT" C2056R 4 lbs.PREMIUM & ULTIMATE STARTERSwith NEW FIELD COILS & NEW ARMATURES - Why?We have learned that after 40-50 years of use, the old insulation on both the field coils & armatures has deteriorated & may fail at any time. For more details on our rebuilt starters, go to: www.corvair.com (click on "rebuilds").FOAMED IN PLACEin a new strong box. Gets to you in perfect condition and easy for you to RETURN YOUR CORE!Heavy Duty STARTER MOTOR - 1960-69Whether for competition or just peace of mind for a street Cor vair, this starter will start that hard to start motor! Bolts right in like a stock starter. 1.4 KW Nippondneso motor, 500 f t. lbs. of torque, 5 roller bearings, 4.44:1 reduction, approximately 9 lbs., heat and water resistant, durable, compact and reliable. With instructions.NEW not a rebuild C11114 11 lbs. (boxed) "REVERSE ROTATION or VW STARTERS - See page 327C192AC788A