Home Order Catalog Online Catalog New Items Contact Us

i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
85
Starter Parts: '60-69 unless otherwise noted
Starter Rebuild Kits
Basic Kit: Includes – #5-C622A brushes, #10-C629 grommet, #12-C625 thrust washer, #15-C1277 solenoid gasket, #15½-C2262 solenoid
screws, #19½-C1219 "C" clip, #21-C627 snap ring, #24-C626 drive bushing, #31-C5421 commutator bushing. C8177 14 oz.
Delux Kit: Includes – Everything in the Basic Kit plus #14-C191A new solenoid , #17-C628 drive lever, #20-C627A collar & washer,
#25-C192A drive, (or order the BASIC KIT and just the additional parts you need). C8178 4 lbs.
$$ Savers = Top quality new parts – A Great Buy!
Clark Rebuilt Starters – See page 86
PICTURE # Usually Needed Parts
1. Insulated Brush Support C2771 2 oz.
2. Spring – Starter Brush: 2 needed C623 1 oz.
3. Non-Insulated Brush Support (metal) C2770 2 oz.
4. Brush Lead – Braided C2772 1 oz.
5. BRUSHES: 1 = 4 brushes C622A 4 oz.
6. Brush Screws: Also come with brush supports. Set of 4. C4321 1 oz./set
7. Brush Pin: Often wears. C2679 1 oz.
8. Support Kit : 2 needed per car (screws, ground strap, pins, bracket). C2769 2 oz.
9. Bolts – Thru: Often rusty, head bad or breaks. 2 needed. C1221 4 oz.
10. Rubber Grommet: In starter body. C629 1 oz.
11. Field Coil Assembly : Complete, NEW. C4325 8 oz.
12. Pressed Fabric Thrust Washer: Usually bad. C625 2 oz.
13. Armature: 60-69 New Repro. C11269N 8 lbs.
14. SOLENOID – with spring: NEW (when starter just clicks and clicks).
GM C191 2 lbs. Non-GM C191A 2 lbs.
Solenoid Spring (included with solenoid) C7807 4 oz.
15. Solenoid Gasket: Between solenoid and housing – original. C1277 2 oz.
15½. Screws – Solenoid: Usually ruined. Set of 2 screws & lockwashers. C2262 1 oz./set
16. Plunger: Often scored or rusty. C3705 8 oz.
17. Lever – Starter Drive: Usually badly worn on contact areas. See photos. C628 6 oz.
18. Plunger Pin: Can you save the old one? C3706 1 oz.
19. Lever Shaft C1220 4 oz.
19½. Clip: Original style. Old one usually breaks. C1219 1 oz.
20. Collar & Washer : Fit together over snap ring. Sold as set. C627A 1 oz./set
ELECTRICAL "GREASE": This compound is formulated to keep dirt & moisture from all electrical connections to prevent corrosion & to provide ease in removal. We suggest
it for horns, starter solenoid, light bulbs into sockets, main harness to multiconnectors, etc. 2 fl. oz. tube is enough for up to 100 average connections. C11687 4 oz.
$$ Saver
"
C11269N
#17 – STARTER LEVER – We suggest a NEW starter
lever. Often the round steel parts that push the
starter drive are 50% worn (see top & side views).
C628
C191A
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**85Starter Parts: '60-69 unless otherwise notedStarter Rebuild Kits Basic Kit: Includes - #5-C622A brushes, #10-C629 grommet, #12-C625 thrust washer, #15-C1277 solenoid gasket, #15 1/2 -C2262 solenoid screws, #19 1/2 -C1219 "C" clip, #21-C627 snap ring, #24-C626 drive bushing, #31-C5421 commutator bushing. C8177 14 oz. Delux Kit: Includes - Everything in the Basic Kit plus #14-C191A new solenoid , #17-C628 drive lever, #20-C627A collar & washer, #25-C192A drive, (or order the BASIC KIT and just the additional parts you need). C8178 4 lbs.$$ Savers = Top quality new parts - A Great Buy!Clark Rebuilt Starters - See page 86PICTURE # ?Usually Needed Parts1. Insulated Brush Support C2771 2 oz.2. Spring - Starter Brush: 2 needed C623 1 oz.3. Non-Insulated Brush Support (metal) C2770 2 oz.4. Brush Lead - Braided C2772 1 oz. ?5. BRUSHES: 1 = 4 brushes C622A 4 oz. 6. Brush Screws: Also come with brush supports. Set of 4. C4321 1 oz./set 7. Brush Pin: Often wears. C2679 1 oz. 8. Support Kit : 2 needed per car (screws, ground strap, pins, bracket). C2769 2 oz. 9. Bolts - Thru: Often rusty, head bad or breaks. 2 needed. C1221 4 oz. ?10. Rubber Grommet: In starter body. C629 1 oz. 11. Field Coil Assembly : Complete, NEW. C4325 8 oz.?12. Pressed Fabric Thrust Washer: Usually bad. C625 2 oz.13. Armature: 60-69 New Repro. C11269N 8 lbs.?14. SOLENOID - with spring: NEW (when starter just clicks and clicks). GM C191 2 lbs. Non-GM C191A 2 lbs. Solenoid Spring (included with solenoid) C7807 4 oz. ?15. Solenoid Gasket: Between solenoid and housing - original. C1277 2 oz.?15 1/2 . Screws - Solenoid: Usually ruined. Set of 2 screws & lockwashers. C2262 1 oz./set16. Plunger: Often scored or rusty. C3705 8 oz.?17. Lever - Starter Drive: Usually badly worn on contact areas. See photos. C628 6 oz.18. Plunger Pin: Can you save the old one? C3706 1 oz.19. Lever Shaft C1220 4 oz.?19 1/2 . Clip: Original style. Old one usually breaks. C1219 1 oz.20. Collar & Washer : Fit together over snap ring. Sold as set. C627A 1 oz./setELECTRICAL "GREASE": This compound is formulated to keep dirt & moisture from all electrical connections to prevent corrosion & to provide ease in removal. We suggest it for horns, starter solenoid, light bulbs into sockets, main harness to multiconnectors, etc. 2 fl. oz. tube is enough for up to 100 average connections. C11687 4 oz.$$ Saver "C11269N#17 - STARTER LEVER - We suggest a NEW starter lever. Often the round steel parts that push the starter drive are 50% worn (see top & side views).C628C191A
Search In Corvair Catalog Content
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2022 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498