Clark's Corvair Parts, Inc. - Corvair Parts Catalog - Over 12,000 parts

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

363

USED BRAKE PEDAL ASSEMBLIES

Includes pedal and whole assembly it attaches to. Does not include the "plunger rod" that actuates the master cylinder. These are listed for PG Cars only (exc. Van).

For Standards, see Clutch Pedals pages 356-357.

All 15 lbs. ea.

1960-61 Cars

1962-64 Cars

1961-65 Van

Upper & Lower

1965-66 Cars

1967-69 Cars

Brake Pedal Assembly CU1051 CU1053 CU1731 Q CU1055 CU1055L

VAN BRAKE PEDAL – The following parts do not come with the van brake pedal assembly (shaft & retainer).

A. SHAFT CU1573 8 oz.

B. RETAINER CU1574 2 oz.

USED PLUNGER ROD

Includes adjustable rod, clevis and pin.

DOES NOT COME WITH BRAKE PEDAL ASSEMBLY.

1962-66 Cars CU1734 8 oz.

1967-69 Cars CU1735 8 oz.

USED MASTER CYLINDER COVERS

May have some corrosion and/or minor rust.

Large screw on 1962-63 Cars (Some) CU3661 6 oz.

Round "bail" cover – 1962-66 CU3662 6 oz.

Dual "bail" cover – 1967-69 CU3663 8 oz.

USED 67-69 BRAKE DIST. BLOCK & SWITCH

1. USED BRACKET – Holds switch block

CU1738 12 oz.

2. USED SWITCH BLOCK & SWITCH

NO GUARANTEE

Indicate if you will accept the other choice

if we are out of your 1st choice.

WITH ATTACHED TUBES – CU1739 1 lb.

NO ATTACHED TUBES – CU1740 1 lb.

USED BRASS BRAKE CONNECTORS

We are no longer offering these used. We have most in stock as new repros.

See page 150.

1965-69 REAR WHEEL BEARING PARTS

I suggest our rebuilt units – page 167.

PICTURE #

4. USED BEARING UNIT HOUSING (Hub) – That bearings go in. Greasy and some rust. Either side.

CU1241 4 lbs.

5. USED REAR WHEEL BEARING YOKE – Will be rusty. 1965 (1/4" bolts) CU1238 2 lbs.

13. USED REAR WHEEL BEARING SPACER 1965-69 CU1240 1 lb.

1960-64 CAR & VAN REAR SUSPENSION

NOTE: For front transmission crossmembers, see page 359.

PICTURE #

1. To build a complete rear suspension order #2 & #3.

BARE CROSSMEMBER

40-45 lbs.

2. BARE USED REAR CROSSMEMBER – Just picture #2. Will be rusty but solid. See above char t. Can go UPS.

3. USED LOWER A-ARMS – Will include shaft and bushings but we suggest replacing the bushings. Will be rusty but solid.

Studs for axle bearing and 1964 triangle may need replacing.

1960-63 Cars

Left (Driver's) 25 lbs. CU499

Right 25 lbs. CU500

1961-64 PG

& 3-Speed

1963-64

4-Speed

1961-65

Vans

CU494 CU498 CU1801

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**363USED BRAKE PEDAL ASSEMBLIESIncludes pedal and whole assembly it attaches to. Does not include the "plunger rod" that actuates the master cylinder. These are listed for PG Cars only (exc. Van). For Standards, see Clutch Pedals pages 356-357.All 15 lbs. ea.1960-61 CarsPG1962-64 CarsPG1961-65 VanUpper & Lower1965-66 CarsPG1967-69 CarsPGBrake Pedal Assembly CU1051 CU1053 CU1731 Q CU1055 CU1055LQ VAN BRAKE PEDAL - The following parts do not come with the van brake pedal assembly (shaft & retainer). A. SHAFT CU1573 8 oz. B. RETAINER CU1574 2 oz.USED PLUNGER RODIncludes adjustable rod, clevis and pin.DOES NOT COME WITH BRAKE PEDAL ASSEMBLY. 1962-66 Cars CU1734 8 oz. 1967-69 Cars CU1735 8 oz.USED MASTER CYLINDER COVERSMay have some corrosion and/or minor rust. Large screw on 1962-63 Cars (Some) CU3661 6 oz. Round "bail" cover - 1962-66 CU3662 6 oz. Dual "bail" cover - 1967-69 CU3663 8 oz.USED 67-69 BRAKE DIST. BLOCK & SWITCH1. USED BRACKET - Holds switch block CU1738 12 oz.2. USED SWITCH BLOCK & SWITCH NO GUARANTEE Indicate if you will accept the other choice if we are out of your 1st choice. WITH ATTACHED TUBES - CU1739 1 lb. NO ATTACHED TUBES - CU1740 1 lb.USED BRASS BRAKE CONNECTORSWe are no longer offering these used. We have most in stock as new repros. See page 150.1965-69 REAR WHEEL BEARING PARTSI suggest our rebuilt units - page 167.PICTURE # 4. USED BEARING UNIT HOUSING (Hub) - That bearings go in. Greasy and some rust. Either side. CU1241 4 lbs.5. USED REAR WHEEL BEARING YOKE - Will be rusty. 1965 (1/4" bolts) CU1238 2 lbs.13. USED REAR WHEEL BEARING SPACER 1965-69 CU1240 1 lb.1960-64 CAR & VAN REAR SUSPENSIONNOTE: For front transmission crossmembers, see page 359.PICTURE # 1. To build a complete rear suspension order #2 & #3. #2 BARE CROSSMEMBER 40-45 lbs.2. BARE USED REAR CROSSMEMBER - Just picture #2. Will be rusty but solid. See above char t. Can go UPS.3. USED LOWER A-ARMS - Will include shaft and bushings but we suggest replacing the bushings. Will be rusty but solid. Studs for axle bearing and 1964 triangle may need replacing.1960-63 CarsLeft (Driver's) 25 lbs. CU499Right 25 lbs. CU5001961-64 PG & 3-Speed1963-64 4-Speed1961-65 VansCU494 CU498 CU1801