i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
210
DASH PARTS
REBUILT SPEEDOS Price includes a refundable core. Check Availability
These speedos have been professionally rebuilt and calibrated.
1960-64 Cars (exc. Turbo) C8113 3 lbs. 1961-65 Vans (FC) C8114 3 lbs. 1965-66 Corsa C9701 1 lb.
1962 Spyder C9699 1 lb. (with shift points} 1965-69 Cars (exc. Corsa or speed control} C8115 3 lbs.
63-64 Spyder C9700
1 lb.
65-69 Monza CLOCKS with quartz movements
Now you can replace that non-working clock with an original REBUILT with accurate quartz movements.
Clock still looks completely stock. C11464 1 lb.
CORE NOTE: Clock DOES NOT have to be working but does need to be complete & not rusted junk. If NOT “PERFECT” refund will be LESS.
BUYING USED Monza CLOCKS: $15.00–$25.00 depending on condition.
CORSA CLOCK with quartz movement installed
We take a used CORSA clock and install the quartz movement for you and test the clock, it's ready to install when you receive. Your old clock with face and knob have a
CORE VALUE (included in price). C11531 1 lb.
CORSA CLOCK FIX: Includes instructions and diodes for fixing your Corsa clock
so there is virtually no spark to burn those points again. C6692 2 oz.
QUARTZ CORSA CLOCK KIT
The point kit for original Corsa clocks is no longer available. This new Quartz clock movement is
an EXACT replacement for your original clock. It fits exactly and the Corsa face and hands go right on. Looks and fits 100%
like stock. Includes instructions. (Photos show kit and completed Corsa clock). C5893X 6 oz.
Clock KNOB: For 1965-69 clocks. The small adjusting knob. C9515 1 oz.
Special SCREW: Small screw that holds the knob on the clock. 65-69 C9515A 1 oz.
SPEEDO PARTS
CORSA SPEEDO GEAR – REPRODUCED!
This is often worn and the odometer stops registering. Replacement of gear before it is "bad" will prevent damage to magnet gear. NOTE: When this gear wears it usually
wears the gear on the magnet shaft. We highly suggest that you also replace the magnet if worn or your new gear may only last a few miles. If you replace the magnet a
speedo shop will have to remagnetize and calibrate the speedo. Our speedos have been rebuilt by a professional shop and worn gears are replaced.
Other Speedo Parts see page 136. 2nd SPEEDO GEAR – 65-66 CORSA C2919 1 oz.
NEW MAGNET & 1st WORM GEAR – 65-66 CORSA (MUST BE magnetized/calibrated) C2909 2 oz.
RUBBER KNOB – TRIP RESET: Spyder & Corsa – knob pushes on. C19 1 oz.
Speedo Gasket: Fits all years, all models. This rubber gasket was used to mount the speedometer to the dash
to absorb road vibration. C7349 1 oz.
Speedo Grommet: Fits all years, all models. (2) of these were used to mount the speedometer to the dash.
Helps absorb vibrations. Usually deteriorated. Set of 2 C7350 1 oz./set
Set of 10 C7350A 2 oz./set
SPEEDOMETER & TACH FACE GLASS: 1963-64 Spyder – C3364 4 oz.
INSTRUMENT RUBBER BUMPERS: Dash – Spyder & Corsa – 1" long round rubber bumpers that go between the various instrument and dash panels to absorb shock
and noise. Sold Set of 10 bumpers. C753 2 oz./set
DASH “Tubes” Fits all years, all models. These are the small “toilet paper" style tubes. They are often coming apart or crushed.
1960-64 CARS & 1961-65 VANS 1965-69 CARS
HIGH BEAM (exc. Turbo) 1 needed C7351 1 oz. CORSA ONLY 3 needed per dash C7354 1 oz. ea.
HIGH BEAM – Turbo 1 needed C7352 1 oz. HIGH BEAM – All other models 1 needed C7355 1 oz.
DIRECTIONAL FLASHERS (exc. Turbo) 2 needed C7353 1 oz. ea. DIRECTIONAL – All (exc. Corsa) 2 needed C7356 1 oz. ea.
Green Directional Plastic Lens: Fits Spyder, Corsa & 1965-69 Monza. Replace that yellow or "clear" one. (2) needed C8142 1 oz. ea.
INSTRUMENT PANEL TO BODY SCREWS set of 2. Holds gauge unit into dash.
1960-64 Cars (all) – C1438H 1 oz. 1961-65 FC (all) – C1438K 1 oz.
FC DASH FILLER PANEL PARTS
1. Gasket: for FRONT FILLER PANEL behind front grill & under glovebox with hot air heater.
Neoprene foam with adhesive with instructions for easy installation. C8451 8 oz.
2. Exact SCREWS for filler panel under dash with correct heads. Set of 22 (includes 1 extra) C8386A 4 oz.
22 RETAINERS for filler panel C8386R 4 oz.
3. Black PLUGS for filler panel. One needed. C4225 1 oz.
4. Black PLUGS for filler panel. Cover door hinge bolts. 2 needed per side. C11398 1 oz.
Black Plugs: Front of front door rocker panels. One per side. Access from behind front corner bottom filler panel. C4225 1 oz.
Also see "NOS" on website and USED pages 377-379
C11464
C7349
C8386R