Home Order Catalog Online Catalog New Items Contact Us

i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
208
WINDSHIELDS 65-69 CAR
Windshield & Rear Glass – These cars originally had a "gasket like" sealing rubber strip between the glass and body. It stayed good for about
6-8 years and then starts to leak. We have heard of windshields so loose they bounced on bumps. Reseal yours! With the correct tools and time, anyone can do as good a
job as a windshield place at 1/4 the price. Besides, they seldom seem to care about trim, paint or whether the glass breaks or not. Be sure to see Removal Tools.
INSTRUCTIONS FOR REMOVAL & REPLACEMENT OF 1965-69 WINDSHIELDS: Order first if you are unsure if you should try. C7991 1 oz.
REMOVAL AIDS '65-69
TRIM REMOVER – Removes front or rear windshield molding trim from clips with no dents!
C767A 8 oz. A MUST!
Also see clips page 209.
CUTTING OUT WINDSHIELD
RELEASE AGENT – Now you can more easily remove weatherstrips, weatherstrip glue, 1965-69 windshields, "burnt on" rubber
grommets, etc. This spray solvent quickly softens the bond. 12 oz. spray can.
C6521 2 lbs. CAN'T SHIP BY AIR
WINDSHIELD KNIFE
WeII designed knife for easy cutting of old windshield
seals. One person operation, no need for broken wires,
(2) people, etc.
KNIFE: C1444X 10 oz.
REPLACEMENT BLADE FOR C1444X: C1444XA 1 oz.
INSTALLING & SEALING GLASS '65-69
With the correct material you can easily stop a leaky windshield or completely replace one yourself.
1 – PREP
The window opening must be perfectly clean, sanded and painted. Do not install over rust,
peeling paint or bare metal. The better the prep, the better your installation will be.
2 – CORDS
This black rubber adhesive cord is attached around the inner edge of the windshield itself. It has a compressed thickness
of about 3/16" when installed. Not only gives you a perfect seal to body but also gives it a cushion like the "gasket" from
the factory. Enough to do a windshield or rear window in each cord.
EXCELLENT QUALITY
$$ saver – C767 1 lb.
3M BRAND – Very Best – C3424 1 lb.
3 – SEALERS
Use around old windshields or newly installed windshields to insure a leak free fit.
SILICONE SEALER – REAL SILICONE
Many feel this is the BEST. Comes in standard cartridge size.
Black color. C2010 1 lb.
REGULAR SEALER
Comes in standard cartridge size. Black color. Will not crack
or harden. 3M skins over, $$ Saver stays like soft "clay".
3M BRAND – C4869 1 lb. $$ Saver – C769 1 lb.
LIQUID SEALER – See page 207
I SUGGEST: 1– PREP 3– SEALER
2– CORD 4– CLIPS (pg. 209)
Clark Emails
Please make sure your spam filter allows delivery of emails from the following email address: clarks @corvair.com (and other
email addresses we may use from @corvair.com). Remember to sign up online to receive the 3-5 email updates that we
send throughout the year. Giving us your email address when ordering DOES NOT get you on the list.
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**208WINDSHIELDS 65-69 CARWindshield & Rear Glass - These cars originally had a "gasket like" sealing rubber strip between the glass and body. It stayed good for about 6-8 years and then starts to leak. We have heard of windshields so loose they bounced on bumps. Reseal yours! With the correct tools and time, anyone can do as good a job as a windshield place at 1/4 the price. Besides, they seldom seem to care about trim, paint or whether the glass breaks or not. Be sure to see Removal Tools. INSTRUCTIONS FOR REMOVAL & REPLACEMENT OF 1965-69 WINDSHIELDS: Order first if you are unsure if you should try. C7991 1 oz.REMOVAL AIDS '65-69TRIM REMOVER - Removes front or rear windshield molding trim from clips with no dents! C767A 8 oz. A MUST! Also see clips page 209.CUTTING OUT WINDSHIELDRELEASE AGENT - Now you can more easily remove weatherstrips, weatherstrip glue, 1965-69 windshields, "burnt on" rubber grommets, etc. This spray solvent quickly softens the bond. 12 oz. spray can. C6521 2 lbs. CAN'T SHIP BY AIRWINDSHIELD KNIFEWeII designed knife for easy cutting of old windshield seals. One person operation, no need for broken wires, (2) people, etc. KNIFE: C1444X 10 oz.REPLACEMENT BLADE FOR C1444X: C1444XA 1 oz.INSTALLING & SEALING GLASS '65-69With the correct material you can easily stop a leaky windshield or completely replace one yourself.1 - PREPThe window opening must be perfectly clean, sanded and painted. Do not install over rust, peeling paint or bare metal. The better the prep, the better your installation will be.2 - CORDSThis black rubber adhesive cord is attached around the inner edge of the windshield itself. It has a compressed thickness of about 3/16" when installed. Not only gives you a perfect seal to body but also gives it a cushion like the "gasket" from the factory. Enough to do a windshield or rear window in each cord.EXCELLENT QUALITY $$ saver - C767 1 lb. 3M BRAND - Very Best - C3424 1 lb.3 - SEALERSUse around old windshields or newly installed windshields to insure a leak free fit.SILICONE SEALER - REAL SILICONEMany feel this is the BEST. Comes in standard cartridge size.Black color. C2010 1 lb. REGULAR SEALERComes in standard cartridge size. Black color. Will not crackor harden. 3M skins over, $$ Saver stays like soft "clay". 3M BRAND - C4869 1 lb. $$ Saver - C769 1 lb.LIQUID SEALER - See page 207I SUGGEST: 1- PREP 3- SEALER 2- CORD 4- CLIPS (pg. 209)Clark EmailsPlease make sure your spam filter allows delivery of emails from the following email address: clarks @corvair.com (and other email addresses we may use from @corvair.com). Remember to sign up online to receive the 3-5 email updates that we send throughout the year. Giving us your email address when ordering DOES NOT get you on the list.
Search In Corvair Catalog Content
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2022 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498