Clark's Corvair Parts, Inc. - Corvair Parts Catalog - Over 12,000 parts

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

C8774A

C8773N

150A

Do You Need Disc Brakes? Unless you drive extra hard, probably not. A fully

restored stock front system is ﬁne for most drivers. Since so much of the weight

is in the rear, even stock brakes can easily lock the front wheels. If you want disc

brakes, these are direct "bolt in" Kits. The only machining needed is on the bearing

hub for the 1965-69 14" and that can be easily done on a brake lathe in a couple

minutes, turn down .330" off hub. All rotors are NEW. Kits include everything you

need including any hardware. These Kits will work with some custom wheels, but

it is up to you to check ﬁt within your wheels. If you return Kits due to ﬁt, they must

appear as NEW, complete, and perfect and will require a restock fee. Designed for

use with stock Corvair rims.

1960-64 Kits – Allow use of 13" 4 lug rims, spaced out about 15mm, new 9"

vented rotor, new 4 piston Wilwood calipers, complete with instructions, ready

to install. Uses modiﬁed stock bearing hubs (yours have a core value – PLEASE

RETURN, with or without stock drums attached).

1965-69 Kits – Allow use of 13" 4 lug rims, spaced out about 15mm, new 9"

vented rotor, new 4 piston Wilwood calipers, complete with instructions, ready

to install. Uses modiﬁed stock bearing hubs (yours have a core value – PLEASE

RETURN, with or without stock drums attached). CHECK AVAILABILITY

1965-69 Kits – Allow use of 14" 5 lug rims, suggested for all V8 or high

performance installations. Minor machining needed on the stock bearing hubs.

Rotors are 10 1/2" vented and calipers are 2 3/8". Requires Torx bit T5O.

3/8" Drive Torx bit – T50 = C9677 2 oz.

COMPLETE KITS

1960-64 Cars only 13", 4 lug rims - C8773N 5O lbs. – price includes refundable core

1965-69 Cars only 13", 5 lug rims - C9047N 50 lbs. – price includes refundable core

1965-69 Cars only 14", 5 lug rims - C8774N 60 lbs.

Disc Brake Replacement Hose for C8774A C11685 2 lbs.

Placing an order? Consider all the parts you might need.

CAR Front Disc Brake Kits

SPOILERS & FLARES

pages 311-313

FC DISC BRAKE BRACKETS

These BRACKETS allow you to ADD Chevy disc brakes to the front of your

61-65 FC. The KIT INCLUDES a complete parts list of everything you need

& instructions. Additional parts should cost $300–$400. You will need

to switch to 1969 or later Chevy 14" or 15" rims. Uses FC bearings and

seals. Bolt on in 3-4 hours. Designed by FC owner drag racing 500 hp.

Rampside! C11540 8 lbs./kit

C11540 C11540

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**C8774AC8773N150ADo You Need Disc Brakes? Unless you drive extra hard, probably not. A fully restored stock front system is fine for most drivers. Since so much of the weight is in the rear, even stock brakes can easily lock the front wheels. If you want disc brakes, these are direct "bolt in" Kits. The only machining needed is on the bearing hub for the 1965-69 14" and that can be easily done on a brake lathe in a couple minutes, turn down .330" off hub. All rotors are NEW. Kits include everything you need including any hardware. These Kits will work with some custom wheels, but it is up to you to check fit within your wheels. If you return Kits due to fit, they must appear as NEW, complete, and perfect and will require a restock fee. Designed for use with stock Corvair rims.1960-64 Kits - Allow use of 13" 4 lug rims, spaced out about 15mm, new 9" vented rotor, new 4 piston Wilwood calipers, complete with instructions, ready to install. Uses modified stock bearing hubs (yours have a core value - PLEASE RETURN, with or without stock drums attached).1965-69 Kits - Allow use of 13" 4 lug rims, spaced out about 15mm, new 9" vented rotor, new 4 piston Wilwood calipers, complete with instructions, ready to install. Uses modified stock bearing hubs (yours have a core value - PLEASE RETURN, with or without stock drums attached). CHECK AVAILABILITY1965-69 Kits - Allow use of 14" 5 lug rims, suggested for all V8 or high performance installations. Minor machining needed on the stock bearing hubs. Rotors are 10 1/2" vented and calipers are 2 3/8". Requires Torx bit T5O. 3/8" Drive Torx bit - T50 = C9677 2 oz.COMPLETE KITS1960-64 Cars only 13", 4 lug rims - C8773N 5O lbs. - price includes refundable core1965-69 Cars only 13", 5 lug rims - C9047N 50 lbs. - price includes refundable core1965-69 Cars only 14", 5 lug rims - C8774N 60 lbs.Disc Brake Replacement Hose for C8774A C11685 2 lbs.Placing an order? Consider all the parts you might need.CAR Front Disc Brake KitsSPOILERS & FLARESpages 311-313FC DISC BRAKE BRACKETSThese BRACKETS allow you to ADD Chevy disc brakes to the front of your 61-65 FC. The KIT INCLUDES a complete parts list of everything you need & instructions. Additional parts should cost $300-$400. You will need to switch to 1969 or later Chevy 14" or 15" rims. Uses FC bearings and seals. Bolt on in 3-4 hours. Designed by FC owner drag racing 500 hp. Rampside! C11540 8 lbs./kitC11540 C11540