Home Order Catalog Online Catalog New Items Contact Us
 Prev 
i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
C9011
96
Screws –Tail Light & Backup Lens
NEW AND SHINY! Oversize for stripped holes may require drilling holes slightly bigger in lens. NOTE: 1964 tail light lens screws originally were machine
thread screws (C4259A, C4259). Most have been replaced by sheet metal screws (C4258A, C4258).
1960-63 Cars (Set of 4) C4256A 1 oz./set
(Set of 8) C4256 2 oz./set
Oversize (Set of 4) C4257 1 oz./set
1964 Cars (see note above)
(Set of 4) C4258A 1 oz./set
(Set of 8) C4258 2 oz./set
Machine thread (Set of 6) C4259A 1 oz./set
(Set of 12) C4259 2 oz./set
1965-69 Cars (Set of 6) C4259A 1 oz./set
(Set of 12) C4259 2 oz./set
1961-65 Vans (Set of 3) C4957 2 oz./set
1961-65 Vans REFLECTIVE RED TRIM (Beside Tail Lens) SCREWS – STAINLESS
(Set of 6) C4956A 1 oz./set
Tail & Back Up Light Retaining Nuts
Original style for 1965-69 Cars inside engine compartment. Sold Set of 4. (enough for 2 light units) C5093 4 oz./set
Screws – Tail Light & Backup Units to Retainer: 1960-64 CARS
2 Screws per unit to hold them into the body (to retainer). Often very rusty (you will see them when lenses are removed). Sold Set of 4.
1960-64 Cars Original Size C5090 2 oz./set
Oversize for rusted holes C5091 2 oz./set
1961-65 Vans Original Size C4958 2 oz./set
Van Tail Light Retainer: Set of 4 – Holds unit tight and grounds it. C7728 2 oz./set
Headlight Bucket Screws: These hold the headlight "bucket" into the body opening. Sold enough for 1 bucket.
61-64 Cars C9064 2 oz./set 1965 Cars C9065 2 oz./set
61-65 FC C5355A 2 oz./set 66-69 Cars C9066 2 oz./set
65–69 Trunk Headlight Screw "Covers": The 65-69 headlight buckets are held in with small sheet metal screws that stick into the trunk. Two or three on each side
that were easily visible were covered by small rubber covers. Sold set/6. (slightly different from originals) C6682H 2 oz.
65–69 Black Nylon Screw Covers: These are used to cover various sheet metal screws that protrude into trunk. Sold set/5. C6682C 2 oz.
BACKUP LIGHT GROMMET: 1961-64
The backup wires go thru this grommet where they go thru the rear metal. Exact repro C9011 1 oz.
1960-69 TAIL LIGHT REPAIR PARTS – see page 99
Tail Light "Blue Dots": Not allowed in some states. Universal REPRO of this popular '50s accessory.
Blue plastic diamond dots with chrome bezels. Requires 7/8" hole. SOLD AS A PAIR. C11147 4 oz.
Caulking Strips: Great for sealing fresh air vents, headlight units to body, etc. Very sticky & softer than gray "hardware store" strip caulking. Can be painted & has a shelf
life of many years. Comes in a box with 60 pieces 1/8" x 1/4" x 12" long. C3201 1 lb.
Box with 20 Pieces C3201X 6 oz.
Gaskets – Light Related
Some Are Not Exact Reproductions, But Are Excellent Substitutes.
Tail (Stop) & Back Up Light Units To Body Gasket
1960-64 Cars: Exact Reproduction C655X 2 oz.
1961-65 Vans (Tail Light Base) C4373 2 oz.
1965-69 Cars C4230 2 oz.
Tail (Stop) & Back Up Lens Gasket (Between Lens & Aluminum Housing)
1960-64 Cars (Slight Modification for 1962) C4014 2 oz.
1961-65 Vans (Tail Light Lens) C4372 2 oz.
1965-69 Cars C3153 2 oz.
Front Directional Gaskets: Goes under lens.
1960-64 Cars & 1961-65 Vans: Molded silicone front directional
gaskets in a light gray color very close to the original color. Glue in
place with weatherstrip glue. Sold as a pair. C5476G 8 oz.
1965-69 Cars EITHER SIDE C2568 4 oz.
65-69 Front Molded Directional Unit To Body Gasket: This rubber gasket goes between the front chrome directional unit
& the body to help keep water out of the trunk. This is a limited, low run reproduction that fits well & looks fine when installed.
I had saved some NOS & they are now black "bricks"! Sold each. C1459 6 oz.
Side Marker To Body Gasket: 1968-69 Cars C914R 2 oz. ea.
Headlight Unit To Body Gasket: (original thickness) 1960-64 Cars & 1961-65 Vans – Either Side C385R 6 oz. ea
THICKER Headlight Unit to Body Gasket: As bodies have had work or headlight buckets have been distorted some customers
are finding that there is leakage around the headlights. Our C385R are the original thickness (3/16"), we are also offering
C735R which are 1/4". C385R will still be supplied in our body gaskets sets. C735R 8 oz. ea.
License Plate Lens Gasket: 1961-69 Cars (exc. Wagon) C654 2 oz.
1960 License Plate Light Gasket
Round Cork: Glass lens gasket C9513 1 oz.
Rectangular Rubber Gasket: Seals license light unit to body. C9514 2 oz.
C4373
C2568
C385R
C735R
left or right
C4014
C5476G
C7728
C4230
C655X
C1459
C654C9514
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**C901196Screws -Tail Light & Backup Lens NEW AND SHINY! Oversize for stripped holes may require drilling holes slightly bigger in lens. NOTE: 1964 tail light lens screws originally were machine thread screws (C4259A, C4259). Most have been replaced by sheet metal screws (C4258A, C4258).1960-63 Cars (Set of 4) C4256A 1 oz./set (Set of 8) C4256 2 oz./set Oversize (Set of 4) C4257 1 oz./set1964 Cars (see note above) (Set of 4) C4258A 1 oz./set (Set of 8) C4258 2 oz./set Machine thread (Set of 6) C4259A 1 oz./set (Set of 12) C4259 2 oz./set1965-69 Cars (Set of 6) C4259A 1 oz./set (Set of 12) C4259 2 oz./set 1961-65 Vans (Set of 3) C4957 2 oz./set 1961-65 Vans REFLECTIVE RED TRIM (Beside Tail Lens) SCREWS - STAINLESS (Set of 6) C4956A 1 oz./set Tail & Back Up Light Retaining NutsOriginal style for 1965-69 Cars inside engine compartment. Sold Set of 4. (enough for 2 light units) C5093 4 oz./set Screws - Tail Light & Backup Units to Retainer: 1960-64 CARS 2 Screws per unit to hold them into the body (to retainer). Often very rusty (you will see them when lenses are removed). Sold Set of 4. 1960-64 Cars Original Size C5090 2 oz./set Oversize for rusted holes C5091 2 oz./set 1961-65 Vans Original Size C4958 2 oz./set Van Tail Light Retainer: Set of 4 - Holds unit tight and grounds it. C7728 2 oz./setHeadlight Bucket Screws: These hold the headlight "bucket" into the body opening. Sold enough for 1 bucket. 61-64 Cars C9064 2 oz./set 1965 Cars C9065 2 oz./set 61-65 FC C5355A 2 oz./set 66-69 Cars C9066 2 oz./set65-69 Trunk Headlight Screw "Covers": The 65-69 headlight buckets are held in with small sheet metal screws that stick into the trunk. Two or three on each side that were easily visible were covered by small rubber covers. Sold set/6. (slightly different from originals) C6682H 2 oz.65-69 Black Nylon Screw Covers: These are used to cover various sheet metal screws that protrude into trunk. Sold set/5. C6682C 2 oz.BACKUP LIGHT GROMMET: 1961-64 The backup wires go thru this grommet where they go thru the rear metal. Exact repro C9011 1 oz.1960-69 TAIL LIGHT REPAIR PARTS - see page 99Tail Light "Blue Dots": Not allowed in some states. Universal REPRO of this popular '50s accessory.Blue plastic diamond dots with chrome bezels. Requires 7/8" hole. SOLD AS A PAIR. C11147 4 oz.Caulking Strips: Great for sealing fresh air vents, headlight units to body, etc. Very sticky & softer than gray "hardware store" strip caulking. Can be painted & has a shelf life of many years. Comes in a box with 60 pieces 1/8" x 1/4" x 12" long. C3201 1 lb. Box with 20 Pieces C3201X 6 oz.Gaskets - Light Related Some Are Not Exact Reproductions, But Are Excellent Substitutes. Tail (Stop) & Back Up Light Units To Body Gasket1960-64 Cars: Exact Reproduction C655X 2 oz.1961-65 Vans (Tail Light Base) C4373 2 oz.1965-69 Cars C4230 2 oz.Tail (Stop) & Back Up Lens Gasket (Between Lens & Aluminum Housing)1960-64 Cars (Slight Modification for 1962) C4014 2 oz.1961-65 Vans (Tail Light Lens) C4372 2 oz.1965-69 Cars C3153 2 oz.Front Directional Gaskets: Goes under lens. 1960-64 Cars & 1961-65 Vans: Molded silicone front directional gaskets in a light gray color very close to the original color. Glue in place with weatherstrip glue. Sold as a pair. C5476G 8 oz. 1965-69 Cars EITHER SIDE C2568 4 oz.65-69 Front Molded Directional Unit To Body Gasket: This rubber gasket goes between the front chrome directional unit & the body to help keep water out of the trunk. This is a limited, low run reproduction that fits well & looks fine when installed. I had saved some NOS & they are now black "bricks"! Sold each. C1459 6 oz.Side Marker To Body Gasket: 1968-69 Cars C914R 2 oz. ea.Headlight Unit To Body Gasket: (original thickness) 1960-64 Cars & 1961-65 Vans - Either Side C385R 6 oz. ea THICKER Headlight Unit to Body Gasket: As bodies have had work or headlight buckets have been distorted some customers are finding that there is leakage around the headlights. Our C385R are the original thickness (3/16"), we are also offering C735R which are 1/4". C385R will still be supplied in our body gaskets sets. C735R 8 oz. ea.License Plate Lens Gasket: 1961-69 Cars (exc. Wagon) C654 2 oz.1960 License Plate Light Gasket Round Cork: Glass lens gasket C9513 1 oz. Rectangular Rubber Gasket: Seals license light unit to body. C9514 2 oz.C4373C2568C385RC735Rleft or rightC4014C5476GC7728C4230C655XC1459C654C9514
Next
Search In Corvair Catalog Content
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2019 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
P.O.Box #NET 400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498