Clark's Corvair Parts, Inc. - Corvair Parts Catalog - Over 12,000 parts

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

338

SUSPENSION TOOLS

COIL SPRING COMPRESSOR

NOTE: A compressor is needed but no regular coil spring compressor will work on the front Corvair coil springs.

This compressor is one that we are making and works on all 1960-69 front coil springs. Comes complete with instructions. (The rear coil springs can

usually be easily installed by 2 people with a jack to lift up under the rear wheel).

C7243 4 lbs.

60-69 CARS & 61-65 FC Suspension Bushing Installation Tools

These tools are not fancy, but they prevent your suspension from being distorted when installing bushings. Do not assume a machine shop will have

these!! Some photos are from the shop manual and do not show our tools in them. Bushing spacers have a bolt attached for easier removal.

A-ARM SPACER – keeps "arms" BUSHING SPACER – keeps bushing area

from collapsing from collapsing

(SEE

c IN PHOTO) (SEE

IN PHOTO)

60-64 CARS AND 61-65 FC – REAR SUSPENSION

LOWER A-ARM SPACER

c C5353A 2 lbs.

LOWER A-ARM BUSHING SPACERS (sold as a pair)

C5353B 10 oz.

60-69 CARS – FRONT SUSPENSION

60-69 UPPER A-ARM SPACER

c C5353C 2 lbs.

LOWER A-ARM BUSHING SPACERS

60-64 Cars

C5353E 6 oz.

65-69 Cars

C5353F 6 oz.

61-65 FC – FRONT SUSPENSION

UPPER A-ARM SPACER

c C5063A 2 lbs.

LOWER A-ARM SPACER

c C5063C 10 oz.

LOWER A-ARM BUSHING SPACERS (sold as a pair)

C5063E 10 oz.

DUST CAP INSTALLATION TUBE

Just a simple tube that is the exact size to evenly press on the outside edge of the dust cap (front bearing

grease cap). Hit with a hammer for perfect installation. 1960-64 Cars C4872E 10 oz.

1961-65 FC & 1965-69 Cars C4872L 10 oz.

DIFFERENTIAL & AXLE TOOLS

DIFFERENTIAL SIDE BEARING ADJUSTING WRENCH – (Spanner Wrench)

Use with socket extension to easily move the large adjuster. Don't hit tabs with a hammer!

Tabs are brittle and can break off. Make rebuilding the differential "easy". Many differential sleeves

are very rusty and customers are using 2 & 3 foot breaker bars with our "wrench". They can't take that!

This heavy duty wrench should handle 95% of the sleeves but NO guarantee.

HEAVY DUTY "wrench" C8231 12 oz.

REMOVE RACES FROM DIFFERENTIAL BEARING ADJUSTERS

The shop manual says to drill holes and punch out to remove races from differential bearing adjusters.

It is hard to get the holes in the right place and they might leak. This block of steel ﬁts into the adjuster.

You can now use a pry bar similar to photo (not included.) Sharpen the end slightly and the race will pry right out.

C3914 6 oz.

DWG =

PART IS DISCONTINUED WHEN INVENTORY IS GONE.

(DISC WHEN GONE)

All prices, pictures, speciﬁcations subject to change without notice.

Selling Great – Thanks!

Rear A-Arm Spacer Shown

Stops destroying dust cap!

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**338SUSPENSION TOOLSCOIL SPRING COMPRESSORNOTE: A compressor is needed but no regular coil spring compressor will work on the front Corvair coil springs.This compressor is one that we are making and works on all 1960-69 front coil springs. Comes complete with instructions. (The rear coil springs can usually be easily installed by 2 people with a jack to lift up under the rear wheel). C7243 4 lbs.60-69 CARS & 61-65 FC Suspension Bushing Installation ToolsThese tools are not fancy, but they prevent your suspension from being distorted when installing bushings. Do not assume a machine shop will have these!! Some photos are from the shop manual and do not show our tools in them. Bushing spacers have a bolt attached for easier removal. A-ARM SPACER - keeps "arms" BUSHING SPACER - keeps bushing area from collapsing from collapsing (SEE c IN PHOTO) (SEE 8 IN PHOTO) 60-64 CARS AND 61-65 FC - REAR SUSPENSIONLOWER A-ARM SPACER c C5353A 2 lbs.LOWER A-ARM BUSHING SPACERS (sold as a pair) 8 C5353B 10 oz.60-69 CARS - FRONT SUSPENSION 60-69 UPPER A-ARM SPACER c C5353C 2 lbs. LOWER A-ARM BUSHING SPACERS 60-64 Cars 8 C5353E 6 oz. 65-69 Cars 8 C5353F 6 oz.61-65 FC - FRONT SUSPENSIONUPPER A-ARM SPACER c C5063A 2 lbs.LOWER A-ARM SPACER c C5063C 10 oz.LOWER A-ARM BUSHING SPACERS (sold as a pair) 8 C5063E 10 oz.DUST CAP INSTALLATION TUBEJust a simple tube that is the exact size to evenly press on the outside edge of the dust cap (front bearinggrease cap). Hit with a hammer for perfect installation. 1960-64 Cars C4872E 10 oz. 1961-65 FC & 1965-69 Cars C4872L 10 oz.DIFFERENTIAL & AXLE TOOLSDIFFERENTIAL SIDE BEARING ADJUSTING WRENCH - (Spanner Wrench)Use with socket extension to easily move the large adjuster. Don't hit tabs with a hammer! Tabs are brittle and can break off. Make rebuilding the differential "easy". Many differential sleeves are very rusty and customers are using 2 & 3 foot breaker bars with our "wrench". They can't take that! This heavy duty wrench should handle 95% of the sleeves but NO guarantee. HEAVY DUTY "wrench" C8231 12 oz.REMOVE RACES FROM DIFFERENTIAL BEARING ADJUSTERSThe shop manual says to drill holes and punch out to remove races from differential bearing adjusters. It is hard to get the holes in the right place and they might leak. This block of steel fits into the adjuster. You can now use a pry bar similar to photo (not included.) Sharpen the end slightly and the race will pry right out. C3914 6 oz.DWG = PART IS DISCONTINUED WHEN INVENTORY IS GONE.(DISC WHEN GONE)All prices, pictures, specifications subject to change without notice.Selling Great - Thanks!Rear A-Arm Spacer ShownStops destroying dust cap!