Clark's Corvair Parts, Inc. - Corvair Parts Catalog - Over 12,000 parts

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

212

MORE WIPER PARTS

1960-64 Cars – Wiper wire GROMMET: 2 hole-use C6869 2 oz.

1965-69 – WIPER WIRE/ANTENNA WIRE GROMMET: Located on the right side of the trunk.

Once the wires were inserted, the factory covered with a "glob" of gray clay – exact 3 hole repro. C5964W 2 oz.

WIPER SWITCHES: Excellent Repro. See "NOS" on website for applications not listed.

1960-64 Single Speed with Washer C1328 6 oz.

1963-64 2-Speed Switch w/ Washer C1329 6 oz.

1965 Single Speed CX884 6 oz.

1965-66 2-Speed Switch w/ Washer C1327 6 oz.

1967-69 Dual Speed switch w/ washer C2806A 8 oz.

Intermittent Wiper Control

Now you can make your Corvair wipers intermittent.

Fits 2-speed switch only.

C13088 6 oz.

TOOL for installing Headlight &

Wiper Switch Retainer "Rings"

Cars & FC. Remove these without damage

to the retainer or your dash.

1960-64 C12603 8 oz.

1965-69 C6679F 4 oz.

C5964W

REPRO WIPER ARMS and BLADES – All Cars &

These are excellent stainless REPROS. The wiper arms are virtually identical to the originals

with beautiful chrome on the attaching pivots (as noted) and the tension of the new springs

will help them wipe better. The blades are also polished stainless but of a non-original

rounded top design (include rubber insert). I think they look nicer than the originals. The wiper

blade is slightly longer, wiping a little more of the glass. You may still use your original wiper

blade part with all arms.

1960-64 Cars & FC – Not available as of 2019 – Use 65-69 style.

1965-69 REPRO – polished stainless with correct ﬂared chrome "pivot".

1965-69 REPRO $$ SAVER – not buffed quite as much.

Q Note: 65-69 all had the same ﬂared pivot but 66-68 some were polished chrome and

some were satin ﬁnished (not available). 1969's were painted a "gray" paint (not available).

REPRO

COMPLETE KIT

2 Wiper Arms

2 Wiper Blades

(2 Rubber Inserts)

WIPER ARMS

Sold each

WIPER BLADES

(WITH rubber inserts)

Sold each

REPLACEMENT

RUBBER INSERTS

(Set of 2)

1960-64 Cars

1961-65 FC

order

’65-69 style

order

’65-69 style

C10920 12 oz.

C849 10 oz.

FIT ALL

1965-69

C10949 3 lbs. C10947 1 lb.

1965-69

$$ SAVER

C10921X 3 lbs. C10919X 1 lb.

WIPER BLADE REFILLS

You'd pay 50% more some rainy night! Don't take the risk of ruining a windshield. Fit ALL Corvairs.

1 - TRICO/ANCO STYLE "1" = 1 pair

C849 10 oz./pair Compress metal tab at one end and push in.

Now designed to ﬁt both styles.

2 - WINTER WIPER BLADES Rubber covered.

C3337 6 oz. Sold each.

Complete blade unit ﬁts all Corvairs. Keeps ice and slush from clogging the blade.

DON'T BE DISAPPOINTED!!!!!

We try our best to keep all parts and all repros in stock forever, but this will not always be possible. If there is a part you

really want, especially if it is a repro, ORDER IT NOW rather than be sorry in the future.

You have enough to do with your restoration.

Don’t spend hours trying to make brake lines. See our pre-bent lines, page 149

C13088

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**212MORE WIPER PARTS1960-64 Cars - Wiper wire GROMMET: 2 hole-use C6869 2 oz.1965-69 - WIPER WIRE/ANTENNA WIRE GROMMET: Located on the right side of the trunk. Once the wires were inserted, the factory covered with a "glob" of gray clay - exact 3 hole repro. C5964W 2 oz. WIPER SWITCHES: Excellent Repro. See "NOS" on website for applications not listed. 1960-64 Single Speed with Washer C1328 6 oz. 1963-64 2-Speed Switch w/ Washer C1329 6 oz. 1965 Single Speed CX884 6 oz. 1965-66 2-Speed Switch w/ Washer C1327 6 oz. 1967-69 Dual Speed switch w/ washer C2806A 8 oz.Intermittent Wiper ControlNow you can make your Corvair wipers intermittent. Fits 2-speed switch only. C13088 6 oz.TOOL for installing Headlight & Wiper Switch Retainer "Rings"Cars & FC. Remove these without damage to the retainer or your dash. 1960-64 C12603 8 oz. 1965-69 C6679F 4 oz.C5964WREPRO WIPER ARMS and BLADES - All Cars & FCThese are excellent stainless REPROS. The wiper arms are virtually identical to the originals with beautiful chrome on the attaching pivots (as noted) and the tension of the new springs will help them wipe better. The blades are also polished stainless but of a non-original rounded top design (include rubber insert). I think they look nicer than the originals. The wiper blade is slightly longer, wiping a little more of the glass. You may still use your original wiper blade part with all arms. 1960-64 Cars & FC - Not available as of 2019 - Use 65-69 style. 1965-69 REPRO - polished stainless with correct flared chrome "pivot". 1965-69 REPRO $$ SAVER - not buffed quite as much.Q Note: 65-69 all had the same flared pivot but 66-68 some were polished chrome and some were satin finished (not available). 1969's were painted a "gray" paint (not available).REPROCOMPLETE KIT2 Wiper Arms2 Wiper Blades(2 Rubber Inserts)WIPER ARMSSold eachWIPER BLADES(WITH rubber inserts)Sold eachREPLACEMENT RUBBER INSERTS(Set of 2)1960-64 Cars1961-65 FCorder '65-69 styleorder '65-69 styleC10920 12 oz.C849 10 oz.FIT ALL1965-69 QC10949 3 lbs. C10947 1 lb.1965-69 $$ SAVERC10921X 3 lbs. C10919X 1 lb.WIPER BLADE REFILLSYou'd pay 50% more some rainy night! Don't take the risk of ruining a windshield. Fit ALL Corvairs.1 - TRICO/ANCO STYLE "1" = 1 pair C849 10 oz./pair Compress metal tab at one end and push in. Now designed to fit both styles.2 - WINTER WIPER BLADES Rubber covered. C3337 6 oz. Sold each. Complete blade unit fits all Corvairs. Keeps ice and slush from clogging the blade.DON'T BE DISAPPOINTED!!!!! We try our best to keep all parts and all repros in stock forever, but this will not always be possible. If there is a part you really want, especially if it is a repro, ORDER IT NOW rather than be sorry in the future.You have enough to do with your restoration.Don't spend hours trying to make brake lines. See our pre-bent lines, page 149C13088