Clark's Corvair Parts, Inc. - Corvair Parts Catalog - Over 12,000 parts

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

139

KONI SHOCKS

–

60-69 Cars and 61-65 FC

The correct KONI shocks had not been available for Corvairs for over 20 years, but Clark's now has them for 60-64 cars,

61-65 FC and 65-69 cars. Koni shocks are expensive, but they are also the best shock you can buy for your Corvair.

"Inﬁnitely adjustable" from soft to extremely ﬁrm. You can dial in exactly the ride control you want. Cal installed a set

on their '64 Spyder along with new coil springs and says it is the best handling "stock" '64 he's ever driven.

KONI SHOCKS for 1960-64 CARS & '61-65 FC – GAS

The early Koni do not have the original bottom-center and use washers included.

Sold as a pair complete except for mounting bolts (see below).

Pair for Front or Rear C11550 6 lbs./PAIR

Bolts 60-64 FRONT or REAR STAINLESS C1091 4 oz. (set for 2 shocks)

60-64 FRONT or REAR "GR 8" C4772 4 oz. (enough for 1 shock)

KONI SHOCKS for 65-69 CARS – HYDRAULIC

Sold as a pair complete except for mounting bolts and FRONTS require the special top bushing (see below for bolts and bushings).

65-69 FRONTS C6765 6 lbs./PAIR

65-69 REARS C6766 6 lbs./PAIR

Bolts 65-69 FRONT "GR 8" C4773 6 oz. All sold enough

65-69 REAR "GR 8" C4774 6 oz. for 1 Shock

SPECIAL FRONT TOP BUSHINGS MUST BE USED! Sold Set of 2. C6765B 12 oz./set

NOTE: KONI WILL honor the "Lifetime" Warranty when shocks are used on Classic/Antique Cars.

Ultimate

Adjustable

Shocks

L L L L L

free INSTRUCTION SHEETS free

L L L L L

We supply instruction sheets with over 600 of our parts to help you. If you should still have questions, just call, email or fax!

KONI Early

Clark ULTIMATE HEAVY DUTY CAR SPEEDOMETER CABLE

We have taken everything we’ve learned about speedometer cables since 1973 and made what we believe is the BEST SPEEDOMETER CABLE EVER. There have been

2 cables available in the past: (1) original GM, (2) “Old REPRO”. Here’s how they compare (The “REPRO” is what has been on the market since the 1990’s – we’ll still

sell it as a $$ SAVER).

’65–’69

Available ONLY from Clark’s

ULTIMATE CABLE: C138

$$ SAVER “Old REPRO”: C138M

COMPARISON

Clark ULTIMATE C138

“Old REPRO” C138M Original GM – Seldom Available

Inner Sleeve Teflon (1)

none Nylon

Outer Rubber High Quality EPDM (2) ? ?

Metal Attaching at Hub Crimped and Sealed (3) Crimped Crimped

Mounting Bracket Moved (4) Moved Wrong

Rubber Seal Installed (5) NOT included NOT included

Warranty 2 years (6) 1 year 90 days

1965-69 Speedo Cable Notes

1. Our TEFLON sleeve is an E XACT FIT, allows for very low friction with the inner cable. The “Old REPRO” has no liner and inner cable can whip around. The original nylon was

a real problem as it cracked, got melted by the inner cable and had a tendency to “walk” to one end, bunch and bind the inner cable. (Main reasons it was left out of the “Old

REPRO”.)

2. The “Old REPRO” and original cables were simply crimped where the bracket and steel sleeve attached. If not perfect, moisture can get inside the assembly. Clark ULTMATE

CABLE is crimped and mechanically sealed.

3. “Middle” mounting bracket was relocated on the “Old REPRO” and our ULTIMATE CABLE because the original location put too much strain on the cable assembly during

turnlng.

4. We install the rubber seal that seals to the back of the spindle so you WON’T FORGET!

5. TESTED! Our prototype cable was tested for the equivalent of 33,000 miles at 65mph, with constant turning of the test equipment to simulate driving movement. NO wear

was evident at the end of the test.

6. WARRANTY – If the ULTIMATE CABLE should fail within 2 years of purchase, we will replace it free of charge when you return the failed one. We cover the cost to ship the new

one to you (in U.S.A. & Canada).

PLEASE NOTE!! It is more and more common for the brass bushing going Into the speedo head to seize.

WHEN INSTALLING the new cable, turn the end of the speedo with your fingers to feel if it is moving smoothly. I suggest a little liquid graphite just to be safe.

IF THE CABLE FAILS: Please check your speedometer. We should not have to replace the cable due to a seized speedometer.

60-64 Car & FC Cables? The same factory makes our new and improved cables for these years. See page 132.

More Speedo Parts

See page 132

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**139KONI SHOCKS - 60-69 Cars and 61-65 FCThe correct KONI shocks had not been available for Corvairs for over 20 years, but Clark's now has them for 60-64 cars, 61-65 FC and 65-69 cars. Koni shocks are expensive, but they are also the best shock you can buy for your Corvair. "Infinitely adjustable" from soft to extremely firm. You can dial in exactly the ride control you want. Cal installed a set on their '64 Spyder along with new coil springs and says it is the best handling "stock" '64 he's ever driven.KONI SHOCKS for 1960-64 CARS & '61-65 FC - GASThe early Koni do not have the original bottom-center and use washers included.Sold as a pair complete except for mounting bolts (see below). Pair for Front or Rear C11550 6 lbs./PAIR Bolts 60-64 FRONT or REAR STAINLESS C1091 4 oz. (set for 2 shocks) 60-64 FRONT or REAR "GR 8" C4772 4 oz. (enough for 1 shock)KONI SHOCKS for 65-69 CARS - HYDRAULICSold as a pair complete except for mounting bolts and FRONTS require the special top bushing (see below for bolts and bushings). 65-69 FRONTS C6765 6 lbs./PAIR 65-69 REARS C6766 6 lbs./PAIR Bolts 65-69 FRONT "GR 8" C4773 6 oz. All sold enough 65-69 REAR "GR 8" C4774 6 oz. for 1 Shock SPECIAL FRONT TOP BUSHINGS MUST BE USED! Sold Set of 2. C6765B 12 oz./setNOTE: KONI WILL honor the "Lifetime" Warranty when shocks are used on Classic/Antique Cars.Ultimate Adjustable ShocksL L L L L free INSTRUCTION SHEETS free L L L L LWe supply instruction sheets with over 600 of our parts to help you. If you should still have questions, just call, email or fax!KONI EarlyClark ULTIMATE HEAVY DUTY CAR SPEEDOMETER CABLEWe have taken everything we've learned about speedometer cables since 1973 and made what we believe is the BEST SPEEDOMETER CABLE EVER. There have been 2 cables available in the past: (1) original GM, (2) "Old REPRO". Here's how they compare (The "REPRO" is what has been on the market since the 1990's - we'll still sell it as a $$ SAVER).'65-'69Available ONLY from Clark'sULTIMATE CABLE: C138$$ SAVER "Old REPRO": C138MCOMPARISONClark ULTIMATE C138"Old REPRO" C138M Original GM - Seldom AvailableInner Sleeve Teflon (1)none NylonOuter Rubber High Quality EPDM (2) ? ?Metal Attaching at Hub Crimped and Sealed (3) Crimped CrimpedMounting Bracket Moved (4) Moved WrongRubber Seal Installed (5) NOT included NOT includedWarranty 2 years (6) 1 year 90 days1965-69 Speedo Cable Notes 1. Our TEFLON sleeve is an E XACT FIT, allows for very low friction with the inner cable. The "Old REPRO" has no liner and inner cable can whip around. The original nylon was a real problem as it cracked, got melted by the inner cable and had a tendency to "walk" to one end, bunch and bind the inner cable. (Main reasons it was left out of the "Old REPRO".)2. The "Old REPRO" and original cables were simply crimped where the bracket and steel sleeve attached. If not perfect, moisture can get inside the assembly. Clark ULTMATE CABLE is crimped and mechanically sealed. 3. "Middle" mounting bracket was relocated on the "Old REPRO" and our ULTIMATE CABLE because the original location put too much strain on the cable assembly during turnlng.4. We install the rubber seal that seals to the back of the spindle so you WON'T FORGET!5. TESTED! Our prototype cable was tested for the equivalent of 33,000 miles at 65mph, with constant turning of the test equipment to simulate driving movement. NO wear was evident at the end of the test. 6. WARRANTY - If the ULTIMATE CABLE should fail within 2 years of purchase, we will replace it free of charge when you return the failed one. We cover the cost to ship the new one to you (in U.S.A. & Canada).PLEASE NOTE!! It is more and more common for the brass bushing going Into the speedo head to seize.WHEN INSTALLING the new cable, turn the end of the speedo with your fingers to feel if it is moving smoothly. I suggest a little liquid graphite just to be safe.IF THE CABLE FAILS: Please check your speedometer. We should not have to replace the cable due to a seized speedometer.60-64 Car & FC Cables? The same factory makes our new and improved cables for these years. See page 132.More Speedo Parts See page 132