Clark's Corvair Parts, Inc. - Corvair Parts Catalog - Over 12,000 parts

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

C4926

C7133

C645L

C645

SUMMER–WINTER COVERS: These covers go below the oil cooler and distributor (early turbos).

They are important for correct summer–winter cooling and heating.

62-63 Turbo & A/C we believe used the "large one" both sides.

1964 Turbo & A/C we believe used one "large" and 1 "small".

62-64 Turbo & A/C "small" (5 1/2" x 2 5/8") C4926 4 oz.

"large" (5 1/2" x 3 1/4") C7133 4 oz.

65-67 A/C, 140 & Turbo cover below oil cooler.

(can be used on all 65–67 engines) REPRO C645 4 oz.

67-69 with Smog REPRO C645L 4 oz.

325

AIR CONDITIONING PARTS

Parts may vary slightly from original but are GM replacements.

Clutch Drive Assembly (Hub & Plate)

62-66 C2797 Discontinued

1967 C2798 4 lbs.

Coil & Housing, Clutch

62-67 C2799 1 lb.

Cylinder & Shaft Assembly

When replacing cylinder & shaft kits

62-67 C4501 6 lbs.

(also see C2086, C4481 & C4480)

Gasket, Oil Drain Screw

62-67 C4502 2 oz.

Head, Compressor – Front Only

62-67 C4503 1 lb.

Key, Clutch Hub

62-67 C2800 1 oz.

Head Locator Pin Kit

62-67 C4480 2 oz.

Nut Kit (Shaft & Shell)

62-67 C4481 2 oz.

Oil Pump Kit

62-67 C4482 4 oz.

Ring, Coil Retainer

62-67 C4493 4 oz.

Receiver Dehydrator

62-64 C2088 4 lbs.

(will work but not original)

65-67 C2088 4 lbs.

Blower Relay

62-64 C4486 6 oz.

Shaft Seal Kit

62-67 Compressor shaft (seal o-ring), seat seal,

retainer seal, 1 seal sleeve & retainer

C2086 4 oz.

O-Ring, Oil Inlet Tube

62-67 C4484 2 oz.

O-Ring, Suction & Discharge Port

62-67 C4485 2 oz.

Plate, Discharge Valve

62-67 – Front C3327 1 lb.

Rear C3328 1 lb.

Hub Spacer / Washer

62-67 C4495 2 oz.

Oil Inlet Tube

62-67 C4496 4 oz.

Valve Cap

62-67 C4487 2 oz.

Diaphragm Cover

62-66 C4490 1 lb.

Valve Suction Reed (front & rear)

62-67 C3329 8 oz.

Seal, Top Evaporator Core Cover

65-69 refrigerant tape C11823 (pg. 320)

This is a picture of a full kit with

most all of the components including

a 4 carb mounting bracket for the

compressor. Your kit may vary

slightly from this depending on year

and application. All of our kits come

well packed to you along with full

instructions for installing all of the

components.

Thanks to YOU the repros keep coming!

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**C4926C7133C645LC645SUMMER-WINTER COVERS: These covers go below the oil cooler and distributor (early turbos). They are important for correct summer-winter cooling and heating. 62-63 Turbo & A/C we believe used the "large one" both sides. 1964 Turbo & A/C we believe used one "large" and 1 "small". 62-64 Turbo & A/C "small" (5 1/2" x 2 5/8") C4926 4 oz. "large" (5 1/2" x 3 1/4") C7133 4 oz. 65-67 A/C, 140 & Turbo cover below oil cooler. (can be used on all 65-67 engines) REPRO C645 4 oz. 67-69 with Smog REPRO C645L 4 oz.325AIR CONDITIONING PARTSParts may vary slightly from original but are GM replacements.Clutch Drive Assembly (Hub & Plate)62-66 C2797 Discontinued1967 C2798 4 lbs.Coil & Housing, Clutch62-67 C2799 1 lb.Cylinder & Shaft AssemblyWhen replacing cylinder & shaft kits62-67 C4501 6 lbs.(also see C2086, C4481 & C4480)Gasket, Oil Drain Screw62-67 C4502 2 oz.Head, Compressor - Front Only62-67 C4503 1 lb.Key, Clutch Hub62-67 C2800 1 oz.Head Locator Pin Kit62-67 C4480 2 oz.Nut Kit (Shaft & Shell)62-67 C4481 2 oz.Oil Pump Kit62-67 C4482 4 oz.Ring, Coil Retainer62-67 C4493 4 oz.Receiver Dehydrator62-64 C2088 4 lbs.(will work but not original)65-67 C2088 4 lbs.Blower Relay62-64 C4486 6 oz.Shaft Seal Kit62-67 Compressor shaft (seal o-ring), seat seal, retainer seal, 1 seal sleeve & retainerC2086 4 oz.O-Ring, Oil Inlet Tube62-67 C4484 2 oz.O-Ring, Suction & Discharge Port62-67 C4485 2 oz.Plate, Discharge Valve62-67 - Front C3327 1 lb. Rear C3328 1 lb.Hub Spacer / Washer62-67 C4495 2 oz.Oil Inlet Tube62-67 C4496 4 oz.Valve Cap62-67 C4487 2 oz.Diaphragm Cover62-66 C4490 1 lb.Valve Suction Reed (front & rear)62-67 C3329 8 oz.Seal, Top Evaporator Core Cover65-69 refrigerant tape C11823 (pg. 320)This is a picture of a full kit with most all of the components including a 4 carb mounting bracket for the compressor. Your kit may vary slightly from this depending on year and application. All of our kits come well packed to you along with full instructions for installing all of the components.Thanks to YOU the repros keep coming!