Clark's Corvair Parts, Inc. - Corvair Parts Catalog - Over 12,000 parts

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

319

INDIVIDUAL AIR CONDITIONING PARTS

ALL YEARS

Sanden SD7 Compressor – C11789 20 lbs.

This is True Sanden and the only one recommended for Corvairs.

The best upgrade you can make to your A/C system is in the way of a more modern and efﬁcient compressor. We currently

carry the most popular choice. This is a bolt on solution to your tired Frigidaire A6. Our SD-7 is a double pulley, side

discharged, o-ring ﬁtting, silver ﬁnished unit that will work with either R-12 or R-134 refrigerant, and comes with a full 90-day

warranty. Advantages include: a higher compression ratio that improves efﬁciency (less load on engine), O-ring seals that work with the more modern

R-134, smaller & much lighter than the stock counterpart, and this unit can turn either clockwise or counter-clockwise, making it the perfect match to the

Corvair. Note: There are larger units on the market, but they take more engine power & aren't warranteed for Corvair rotation.

Sanden Compressor Fittings Kit – R134 C11790 1 lb.

Are you adding a Sanden Compressor to your stock A/C? Keep your engine compartment clean with these compact ﬁttings.

These tight 90 degree ﬁttings ﬁt both the #8 and #10 o-ring ﬁttings on your Sanden Compressor while stepping up to the

stock Corvair #10 and #12 hose sizes.

See Component ﬂowchart pages 322 & 323 for hose kits that include all of the ﬁttings.

2-Carb Sanden Compressor Mounting Bracket – C11157 4 lbs.

This elegant, low proﬁle designed 2-carb Sanden Compressor mounting bracket has

proven itself through the years. These brackets were designed to work with the new

lighter, more efﬁcient Sanden compressors. They will ﬁt any year head in the stock

location and align to your stock drive pulley perfectly. This bracket will even clear

the FC engine cover. All brackets are laser cut, professionally welded, and delivered

in a semi-gloss black powder-coated ﬁnish. Includes the bracket, all necessary

hardware for mounting, and bracket brace below (C11803.)

4-Carb Sanden Compressor Mounting Bracket – C11158 5 lbs.

Based off the factory 140 bracket, this new sleek designed high-mount setup is as sturdy

as it is attractive. These brackets were designed to work with the new lighter, more efﬁcient Sanden

compressors. They will ﬁt any year head in the stock location and align to your stock drive pulley perfectly.

All brackets are laser cut, professionally welded, and delivered in a semi-gloss black powder-coated

ﬁnish. Includes the bracket, adjusting arm, hardware for mounting, and bracket brace below (C11803).

2 & 4-Carb A6 & Sanden Compressor Bracket Brace, Repro – C11803 1 lb.

This brace helps support GM's heavy A6 compressor, and has likely been long discarded on most factory

A/C cars, but is very much needed. This is a new shorter brace for use on all stock and Sanden compressor

brackets (all years).

A/C Pulley, 1961-69 Cars – C11845 3 lbs.

Original 6" size. Includes all needed bolts. Does Not look stock. This style is

designed after the 1964-67 pulley that bolted to the harmonic balancer. This

is preferred for the 1961-63 cars instead of the original double pulley style.

FC – See page 321.

Trunk Condenser, Low Proﬁle – C11804 5 lbs.

Our new high efﬁciency, low proﬁle condensers are designed to work with today's

R-134 refrigerants. At less than 1 inch thick, this example is ideal for a trunk-mounted

conversion. Trunk Mount Condensers are a good choice to help reduce the extra

temperature loads on the motor. Overall dimensions are 21.25" w x 11.75" h x 1" d.

Electric Fan, 9" Low Proﬁle – C11805 4 lbs.

Want to add more air over your condenser? Do it with our low proﬁle electric fans. Two of these 9" fans are used on

our trunk conversions and there is still plenty of room to spare. Sold each – 2 needed.

The Ultimate Guides to Vairs with AIR

This is the most Comprehensive guide to stock air conditioning in Corvairs. It covers general A/C theory. A year by year

list of changes, retro ﬁts, refrigerants, electrical updates, compressors, condensers, FC's, etc. Approximately 80 pages,

metal spiral bound, full color cover and 4 full color pages in the center along with an index, list of resources and over

160 photos. This should tell you everything you want to know. C6562 1 lb.

C11803

C11845 C11804

C11805

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**319INDIVIDUAL AIR CONDITIONING PARTSALL YEARSSanden SD7 Compressor - C11789 20 lbs.This is True Sanden and the only one recommended for Corvairs.The best upgrade you can make to your A/C system is in the way of a more modern and efficient compressor. We currently carry the most popular choice. This is a bolt on solution to your tired Frigidaire A6. Our SD-7 is a double pulley, side discharged, o-ring fitting, silver finished unit that will work with either R-12 or R-134 refrigerant, and comes with a full 90-daywarranty. Advantages include: a higher compression ratio that improves efficiency (less load on engine), O-ring seals that work with the more modern R-134, smaller & much lighter than the stock counterpart, and this unit can turn either clockwise or counter-clockwise, making it the perfect match to the Corvair. Note: There are larger units on the market, but they take more engine power & aren't warranteed for Corvair rotation.Sanden Compressor Fittings Kit - R134 C11790 1 lb. Are you adding a Sanden Compressor to your stock A/C? Keep your engine compartment clean with these compact fittings. These tight 90 degree fittings fit both the #8 and #10 o-ring fittings on your Sanden Compressor while stepping up to the stock Corvair #10 and #12 hose sizes. See Component flowchart pages 322 & 323 for hose kits that include all of the fittings.2-Carb Sanden Compressor Mounting Bracket - C11157 4 lbs. This elegant, low profile designed 2-carb Sanden Compressor mounting bracket has proven itself through the years. These brackets were designed to work with the new lighter, more efficient Sanden compressors. They will fit any year head in the stock location and align to your stock drive pulley perfectly. This bracket will even clear the FC engine cover. All brackets are laser cut, professionally welded, and delivered in a semi-gloss black powder-coated finish. Includes the bracket, all necessary hardware for mounting, and bracket brace below (C11803.)4-Carb Sanden Compressor Mounting Bracket - C11158 5 lbs.Based off the factory 140 bracket, this new sleek designed high-mount setup is as sturdy as it is attractive. These brackets were designed to work with the new lighter, more efficient Sanden compressors. They will fit any year head in the stock location and align to your stock drive pulley perfectly. All brackets are laser cut, professionally welded, and delivered in a semi-gloss black powder-coated finish. Includes the bracket, adjusting arm, hardware for mounting, and bracket brace below (C11803).2 & 4-Carb A6 & Sanden Compressor Bracket Brace, Repro - C11803 1 lb.This brace helps support GM's heavy A6 compressor, and has likely been long discarded on most factory A/C cars, but is very much needed. This is a new shorter brace for use on all stock and Sanden compressor brackets (all years).A/C Pulley, 1961-69 Cars - C11845 3 lbs.Original 6" size. Includes all needed bolts. Does Not look stock. This style is designed after the 1964-67 pulley that bolted to the harmonic balancer. This is preferred for the 1961-63 cars instead of the original double pulley style. FC - See page 321.Trunk Condenser, Low Profile - C11804 5 lbs.Our new high efficiency, low profile condensers are designed to work with today's R-134 refrigerants. At less than 1 inch thick, this example is ideal for a trunk-mounted conversion. Trunk Mount Condensers are a good choice to help reduce the extra temperature loads on the motor. Overall dimensions are 21.25" w x 11.75" h x 1" d.Electric Fan, 9" Low Profile - C11805 4 lbs.Want to add more air over your condenser? Do it with our low profile electric fans. Two of these 9" fans are used on our trunk conversions and there is still plenty of room to spare. Sold each - 2 needed.The Ultimate Guides to Vairs with AIRThis is the most Comprehensive guide to stock air conditioning in Corvairs. It covers general A/C theory. A year by year list of changes, retro fits, refrigerants, electrical updates, compressors, condensers, FC's, etc. Approximately 80 pages, metal spiral bound, full color cover and 4 full color pages in the center along with an index, list of resources and over 160 photos. This should tell you everything you want to know. C6562 1 lb.C11803C11845 C11804C11805