Home Order Catalog Online Catalog New Items Contact Us

i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
187
'60-64 CAR BODY PANELS
SEE INTRODUCTION – PAGE 186
FRONT LOWER PANEL: STEEL – 1960-64 From behind bumper to bottom seam. C1500 40 lbs. dimensional
WHOLE FRONT BODY PANEL: FIBERGLASS – 1961-64 From bottom seam up to trunk weatherstrip.
See page 186 – INTRODUCTION page.
FIBERGLASS – C4779 92 lbs.
u
(plus UPS LPS due to size – See page 204 for shipping info) *UPS WILL NOT insure.
ROCKER PANEL Improvements!
ROCKER PANELS – 2 DOOR 4 DOOR
In 2001
we introduced these completely retooled
60-64 steel rocker panels with EXACT profiles and correct gauge steel.
COUPES and CONVERTIBLE the rocker panel is mainly under the door so 1 is needed for each side.
4-DOOR and WAGON owners need to order 3 (1 1/2 per side) and weld together.
CONVERTIBLE rocker panel has the correct "flattened" area on the bottom while the COUPE and 4-DOOR "rolls" smoothly to
the bottom lip. BOTH styles go from the lower lip to under the door sill.
Your old ones must be removed and these CLARK ones welded in place. Support body while installing.
COUPES and 4-DOOR – 18 GA x 48" C1501R 7 lbs. ea.
CONVERTIBLES – 12 GA X 48" C1501RCT 14 lbs. ea.
RUBBER ROCKER PANEL DRAIN FLAP: 1960-64 EXACT REPRO C856E 2 oz.
DOG LEGS: "B" ABOVE – Part by lower rear corner of rear door, forms part of wheel opening (often rusts out).
Especially rusts on station wagons. 1960-64 4-DOOR and 1961-62 WAGONS – FIBERGLASS
Left C1505F 5 lbs.
Right C1506F 5 lbs.
FRONT FENDERS: Steel replacement panels – see page 188 for the tops.
Note dimensions. Fit 2 or 4-Door STEEL. For COMPLETE FENDERS see fiberglass below.
FRONT FENDER – SIDE: Complete unit as shown above (A & B) – 1960-64 STEEL
Left C1507
Right C1508
81 lbs. UPS (due to size)
A – FRONT 1/2 OF FRONT FENDER: Shown Above – STEEL
Left C1509 15 lbs.
Right C1510 15 lbs.
B – REAR 1/2 OF FRONT FENDER: Shown in diagram as Area "B" – STEEL
Left C1511 15 lbs.
Right C1512 15 lbs.
FRONT FIBERGLASS FENDERS – Need to replace a whole front fender?
Now you can do it with these beautiful FULL FRONT FENDERS (sides and top in one piece). Pop rivet, screw and/or bolt where original was. For left side also order gas
pocket. MUST BE PREPAID. FIBERGLASS
1960-64 Car Left C6642 UPS 87 lbs. (due to size)
1960-64 Car Right C6641 UPS 87 lbs. (due to size)
Please Wear Gloves
Handling Panels
NOTE
Panels may not join exactly
if you are trying to piece 2-3
small panels together.
C856E
C1500
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**187'60-64 CAR BODY PANELSSEE INTRODUCTION - PAGE 186FRONT LOWER PANEL: STEEL - 1960-64 From behind bumper to bottom seam. C1500 40 lbs. dimensional WHOLE FRONT BODY PANEL: FIBERGLASS - 1961-64 From bottom seam up to trunk weatherstrip. See page 186 - INTRODUCTION page. FIBERGLASS - C4779 92 lbs. u (plus UPS LPS due to size - See page 204 for shipping info) *UPS WILL NOT insure.ROCKER PANEL Improvements!ROCKER PANELS - 2 DOOR 4 DOORIn 2001we introduced these completely retooled60-64 steel rocker panels with EXACT profiles and correct gauge steel.COUPES and CONVERTIBLE the rocker panel is mainly under the door so 1 is needed for each side. 4-DOOR and WAGON owners need to order 3 (1 1/2 per side) and weld together.CONVERTIBLE rocker panel has the correct "flattened" area on the bottom while the COUPE and 4-DOOR "rolls" smoothly to the bottom lip. BOTH styles go from the lower lip to under the door sill.Your old ones must be removed and these CLARK ones welded in place. Support body while installing. COUPES and 4-DOOR - 18 GA x 48" C1501R 7 lbs. ea. CONVERTIBLES - 12 GA X 48" C1501RCT 14 lbs. ea.RUBBER ROCKER PANEL DRAIN FLAP: 1960-64 EXACT REPRO C856E 2 oz.DOG LEGS: "B" ABOVE - Part by lower rear corner of rear door, forms part of wheel opening (often rusts out). Especially rusts on station wagons. 1960-64 4-DOOR and 1961-62 WAGONS - FIBERGLASS Left C1505F 5 lbs. Right C1506F 5 lbs.FRONT FENDERS: Steel replacement panels - see page 188 for the tops. Note dimensions. Fit 2 or 4-Door STEEL. For COMPLETE FENDERS see fiberglass below.FRONT FENDER - SIDE: Complete unit as shown above (A & B) - 1960-64 STEEL Left C1507 Right C1508 81 lbs. UPS (due to size) A - FRONT 1/2 OF FRONT FENDER: Shown Above - STEEL Left C1509 15 lbs. Right C1510 15 lbs. B - REAR 1/2 OF FRONT FENDER: Shown in diagram as Area "B" - STEEL Left C1511 15 lbs. Right C1512 15 lbs. FRONT FIBERGLASS FENDERS - Need to replace a whole front fender?Now you can do it with these beautiful FULL FRONT FENDERS (sides and top in one piece). Pop rivet, screw and/or bolt where original was. For left side also order gas pocket. MUST BE PREPAID. FIBERGLASS 1960-64 Car Left C6642 UPS 87 lbs. (due to size) 1960-64 Car Right C6641 UPS 87 lbs. (due to size) Please Wear Gloves Handling PanelsNOTEPanels may not join exactly if you are trying to piece 2-3 small panels together.C856EC1500
Search In Corvair Catalog Content
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2022 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498