Clark's Corvair Parts, Inc. - Corvair Parts Catalog - Over 12,000 parts

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

186

BODY PANELS

1960-64 CARS - 1961-65 VANS

1965-69 CARS

INTRODUCTION

The body of your Corvair was originally all steel. Due to rust, dents, and/or major collision you may have to repair some body panels. Very few original

panels are still available so we offer you replacement steel and ﬁberglass.

RIGHT SIDE = Passengers Side

LEFT SIDE = Drivers Side

ORIGINAL PANELS: See "NOS" on website only – corvair.com

STEEL PANELS –

clearly labeled as steel

Some of these are stamped steel (like the original) and some are fabricated as close as possible. The panels can be brazed, welded, or pop riveted to

your body and the joint ﬁlled. In the body business it is considered "normal" for steel panels to have slight dents or slight surface rust – just a fact of life

– but we do our best to minimize this.

FIBERGLASS PANELS –

clearly labeled as fiberglass

All our panels are "hand laid". This is more costly but produces a stronger, better ﬁberglass panel. In some areas the panels will be thicker than the

original steel to insure they are strong enough. We have sold these since the late 70's with excellent results. Fiberglass does not rust, and can actually

"bounce" back from small dings.

See page 198 for INSTALLATION PROCEDURE

INSTALLATION –

PAGE 198

Tells you how to install STEEL and FIBERGLASS panels and lists supplies you could need.

TOOLS – see TOOLS page 331

BODY MANUAL –

INVALUABLE! SEE PAGE 244

SHIPPING

Most panels can go UPS or Post Ofﬁce. A few larger panels can go UPS or Truck Collect. If they go UPS we cannot pack well enough so that UPS will

insure them. Please specify ''Truck Collect" for safety.

TRUCK COLLECT SHIPPING

This is needed for items too big for UPS or Post Ofﬁce. You MUST PREPAY for the part then it is shipped COD for the freight (see "Rates" below). (The

trucking company does not charge a COD fee). However, many trucking companies charge $20 - $40 more for residential delivery. Try to have your

delivery made to a business address.

RATES

Trucking companies charge by a minimum of 200 lbs. and also by "density". Therefore, the ﬁrst 200 lbs. (1 lb. to 200 lbs.) will cost approximately

$150-$350.00 depending on your distance from us. Usually 4-5 panels can be shipped for the 200 lb. fee.

10% Return Fee

As with any parts there is a 10% ($3.00 minimum) return fee for any body panels you decide to return within 6 months.

20% ($5.00 minimum) return fee 7-12 months.

Quantity Panel Discounts

The panels MUST ALL BE ORDERED AT THE SAME TIME, ON THE SAME ORDER to qualify for the discount. The discount applies to all early

& late floor panels and trunk bottoms, late front & rear fender patch panels, late battery areas, rear filler panels & lower windshield panel. All items

that qualify have a "p" after the price in our price list and notation on catalog page. The discounts below are in addition to any sales or kit discounts.

You Will Receive a Discount Off these Items Based on

the Total Value of the Panels on Order

Panel Order Value Discount

$300 -$499 2%

$500 - $699 4%

$700 -$899 6%

$900+ 8%

Please Wear Gloves

Handling Panels

¡VERY SHARP!

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**186BODY PANELS 1960-64 CARS - 1961-65 VANS1965-69 CARSINTRODUCTIONThe body of your Corvair was originally all steel. Due to rust, dents, and/or major collision you may have to repair some body panels. Very few original panels are still available so we offer you replacement steel and fiberglass.RIGHT SIDE = Passengers Side LEFT SIDE = Drivers SideORIGINAL PANELS: See "NOS" on website only - corvair.comSTEEL PANELS - clearly labeled as steelSome of these are stamped steel (like the original) and some are fabricated as close as possible. The panels can be brazed, welded, or pop riveted to your body and the joint filled. In the body business it is considered "normal" for steel panels to have slight dents or slight surface rust - just a fact of life - but we do our best to minimize this.FIBERGLASS PANELS - clearly labeled as fiberglassAll our panels are "hand laid". This is more costly but produces a stronger, better fiberglass panel. In some areas the panels will be thicker than the original steel to insure they are strong enough. We have sold these since the late 70's with excellent results. Fiberglass does not rust, and can actually "bounce" back from small dings. See page 198 for INSTALLATION PROCEDUREINSTALLATION - PAGE 198Tells you how to install STEEL and FIBERGLASS panels and lists supplies you could need.TOOLS - see TOOLS page 331BODY MANUAL - INVALUABLE! SEE PAGE 244SHIPPINGMost panels can go UPS or Post Office. A few larger panels can go UPS or Truck Collect. If they go UPS we cannot pack well enough so that UPS will insure them. Please specify ''Truck Collect" for safety.TRUCK COLLECT SHIPPINGThis is needed for items too big for UPS or Post Office. You MUST PREPAY for the part then it is shipped COD for the freight (see "Rates" below). (The trucking company does not charge a COD fee). However, many trucking companies charge $20 - $40 more for residential delivery. Try to have your delivery made to a business address.RATESTrucking companies charge by a minimum of 200 lbs. and also by "density". Therefore, the first 200 lbs. (1 lb. to 200 lbs.) will cost approximately $150-$350.00 depending on your distance from us. Usually 4-5 panels can be shipped for the 200 lb. fee. 10% Return FeeAs with any parts there is a 10% ($3.00 minimum) return fee for any body panels you decide to return within 6 months.20% ($5.00 minimum) return fee 7-12 months.Quantity Panel DiscountsThe panels MUST ALL BE ORDERED AT THE SAME TIME, ON THE SAME ORDER to qualify for the discount. The discount applies to all early & late floor panels and trunk bottoms, late front & rear fender patch panels, late battery areas, rear filler panels & lower windshield panel. All items that qualify have a "p" after the price in our price list and notation on catalog page. The discounts below are in addition to any sales or kit discounts.You Will Receive a Discount Off these Items Based on the Total Value of the Panels on OrderPanel Order Value Discount$300 -$499 2%$500 - $699 4%$700 -$899 6%$900+ 8%Please Wear Gloves Handling Panels ?VERY SHARP!