Clark's Corvair Parts, Inc. - Corvair Parts Catalog

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

340

GEAR OIL PUMP – SUCTION "GUN"

Steel body with ﬂexible spout for emptying and ﬁlling transmission or differentials.

TOP QUALITY GUN – Large capacity

C1693 3 lbs.

STANDARD TRANS. TOOLS

SPECIAL PLIERS

These special heavy duty transmission pliers remove external snap rings

that locate bearings and gears on shafts.

PLIERS – 8” long, maximum spread of 1 3/16". The ends of these pliers are 1/4" wide.

C5557 12 oz.

POWERGLIDE TOOLS

Modulator Valve Wrench – Allows you to easily remove and install modulator. C5294 6 oz.

P.G. LINKAGE ADJUSTMENT TOOL

Shown in the Shop Manual. Very essential for general rebuilds and replacement of shift cable.

A reproduction with instructions. Not exactly as pictured.

C5332 6 oz.

"BUTTERFLY – CLUTCH HEAD" SCREWDRIVER BITS

Inexpensive 1/4" "BITS". Use with driver handles, sockets or a wrench. Now you can have the correct tool!

NOTE: C7361 will be a real screwdriver until stock is gone.

SMALLEST HEAD – 1960-69 PG transmission – The 4 screws that hold the 1/8" steel plate to the valve body. C7743 2 oz.

FC – Some headlight units to body screws & horn. C7743 2 oz.

SMALL HEAD – 1960-64 DASH – Removing clip that holds wiring harness. C7093 2 oz.

MEDIUM HEAD – 1960-64 Car & 1961-65 FC DASH – Removing PG control unit. C7361 12 oz.

LARGE HEAD – FC BODY clutch head bolts. Large clutch head holding heater/differential cover panel, etc. C12649 4 oz.

Dash Tools

These tools allow you to remove the bezel nuts without damaging the nut or dash.

60-65 Ignition Nut Tool (3 projections) C6679A 4 oz.

66-67 Ignition Nut Tool (4 projections) C6679E 4 oz.

65-69 Headlight & Wiper Switch Nut Tool C6679F 4 oz.

button retainer

65-69 Headlight & Wiper Switch Nut Tool: Extension goes into headlight switch to prevent from sliding & scratching chrome, the other end

has a hole to go over the wiper washer button and help center the tool. C1712B 6 oz.

65-69 Headlight Nut: Under the chrome bezel, has 1/4" ratchet hole to help removal it can also be used with C1712B to help in removal.

C1711A 4 oz.

C1711A

C1712B

HEADLIGHT & WIPER SWITCH RETAINER "RING" TOOL

1960-64 Cars & FC. Remove these without damage to the retainer or your dash. C12603 8 oz.

C6679A C6679E C6679F

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**340GEAR OIL PUMP - SUCTION "GUN"Steel body with flexible spout for emptying and filling transmission or differentials.TOP QUALITY GUN - Large capacity C1693 3 lbs.STANDARD TRANS. TOOLSSPECIAL PLIERSThese special heavy duty transmission pliers remove external snap rings that locate bearings and gears on shafts. PLIERS - 8" long, maximum spread of 1 3/16". The ends of these pliers are 1/4" wide. C5557 12 oz.POWERGLIDE TOOLSModulator Valve Wrench - Allows you to easily remove and install modulator. C5294 6 oz.P.G. LINKAGE ADJUSTMENT TOOLShown in the Shop Manual. Very essential for general rebuilds and replacement of shift cable. A reproduction with instructions. Not exactly as pictured. C5332 6 oz."BUTTERFLY - CLUTCH HEAD" SCREWDRIVER BITSInexpensive 1/4" "BITS". Use with driver handles, sockets or a wrench. Now you can have the correct tool! NOTE: C7361 will be a real screwdriver until stock is gone.SMALLEST HEAD - 1960-69 PG transmission - The 4 screws that hold the 1/8" steel plate to the valve body. C7743 2 oz. FC - Some headlight units to body screws & horn. C7743 2 oz. SMALL HEAD - 1960-64 DASH - Removing clip that holds wiring harness. C7093 2 oz. MEDIUM HEAD - 1960-64 Car & 1961-65 FC DASH - Removing PG control unit. C7361 12 oz. LARGE HEAD - FC BODY clutch head bolts. Large clutch head holding heater/differential cover panel, etc. C12649 4 oz.Dash ToolsThese tools allow you to remove the bezel nuts without damaging the nut or dash. 60-65 Ignition Nut Tool (3 projections) C6679A 4 oz. 66-67 Ignition Nut Tool (4 projections) C6679E 4 oz. 65-69 Headlight & Wiper Switch Nut Tool C6679F 4 oz.button retainer65-69 Headlight & Wiper Switch Nut Tool: Extension goes into headlight switch to prevent from sliding & scratching chrome, the other end has a hole to go over the wiper washer button and help center the tool. C1712B 6 oz.65-69 Headlight Nut: Under the chrome bezel, has 1/4" ratchet hole to help removal it can also be used with C1712B to help in removal. C1711A 4 oz.C1711AC1712BHEADLIGHT & WIPER SWITCH RETAINER "RING" TOOL1960-64 Cars & FC. Remove these without damage to the retainer or your dash. C12603 8 oz.C6679A C6679E C6679F