Clark's Corvair Parts, Inc. - Corvair Parts Catalog - Over 12,000 parts

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

190

STAMPED STEEL FLOORS

These 18-20GA steel ﬂoors are just as original as possible. In nearly all

cases the sides go up 2-3 inches to cover all rust out and allow you to

cut and attach as needed. There are some slits in the corners (drastically

lowered cost) - just weld closed when installing. Some seams that were

originally moisture trapping overlap seams are simply "simulated" seams.

These ﬂoors will ﬁt all Corvair car models: 2-Door, 4-Door, Wagon and

Convertible.

The left panel on all front and rear ﬂoor panels are ﬂanged to overlap right

or cut off and butt. Front and rear panels are about 1O" short of meeting

under the front seat. Standard owners will cut the shifter hole. Be sure to

order new rubber plugs for all 60-64. C3760R 2 oz.

Note: Convertible owners will ﬁnd the "ﬂoors a little wider than

necessary. Just cut 2-3" off outer edge to ﬁt (front and rear).

Wagon rear ﬂoor will require cutting.

Don't need a whole panel?

We still suggest you get an exact repro ﬂoor panel. They can be

cut and used as you need and increase the value of your Corvair.

60-64 STEEL FLOOR PANELS

YEAR FRONT FLOORS REAR FLOORS

1960-64 LEFT

C8407

13 lbs.

C8947

7 lbs.

1960-64 RIGHT

C8408

13 lbs.

C8948

7 lbs.

7-9 for ﬂoors

6 under rear seat

2 in trunk

Please Wear Gloves

Handling Panels

PANEL DISCOUNT

All panels & kits this page

See page 186

CLARK STEEL FLOOR KITS – 60-64 CARS

Order these great repro oors as a KIT and SAVE $$!! ADD the steel trunk bottom (C4778A) – see page 189 – and save MORE!

Left & Right Front Floor Kit & 5 rubber plugs C13350 35 lbs. (due to size)

Left & Right Rear Floor Kit & 4 rubber plugs

C13351 18 lbs.

ALL 4 steel floor panels & 9 rubber plugs

C10404 35 lbs.

ALL 4 steel floor panels with steel trunk bottom & 11 rubber plugs (Not for 1960)

C10404T 43 lbs.

Start with the BEST – Clark's Corvair Parts From the Floor Up!

Your purchase of repro body panels as well as other repros

help to get the other parts you want reproduced. Thank you!

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**190STAMPED STEEL FLOORSThese 18-20GA steel floors are just as original as possible. In nearly all cases the sides go up 2-3 inches to cover all rust out and allow you to cut and attach as needed. There are some slits in the corners (drastically lowered cost) - just weld closed when installing. Some seams that were originally moisture trapping overlap seams are simply "simulated" seams. These floors will fit all Corvair car models: 2-Door, 4-Door, Wagon and Convertible.The left panel on all front and rear floor panels are flanged to overlap right or cut off and butt. Front and rear panels are about 1O" short of meeting under the front seat. Standard owners will cut the shifter hole. Be sure to order new rubber plugs for all 60-64. C3760R 2 oz.Note: Convertible owners will find the "floors a little wider than necessary. Just cut 2-3" off outer edge to fit (front and rear). Wagon rear floor will require cutting.Don't need a whole panel?We still suggest you get an exact repro floor panel. They can becut and used as you need and increase the value of your Corvair. 60-64 STEEL FLOOR PANELSYEAR FRONT FLOORS REAR FLOORS1960-64 LEFTC840713 lbs.C89477 lbs.1960-64 RIGHTC840813 lbs.C89487 lbs.7-9 for floors6 under rear seat2 in trunkPlease Wear Gloves Handling PanelsPANEL DISCOUNTAll panels & kits this pageSee page 186CLARK STEEL FLOOR KITS - 60-64 CARS Order these great repro ?oors as a KIT and SAVE $$!! ADD the steel trunk bottom (C4778A) - see page 189 - and save MORE!Left & Right Front Floor Kit & 5 rubber plugs C13350 35 lbs. (due to size)Left & Right Rear Floor Kit & 4 rubber plugs C13351 18 lbs. ALL 4 steel floor panels & 9 rubber plugs C10404 35 lbs. ALL 4 steel floor panels with steel trunk bottom & 11 rubber plugs (Not for 1960) C10404T 43 lbs. Start with the BEST - Clark's Corvair Parts From the Floor Up!Your purchase of repro body panels as well as other repros help to get the other parts you want reproduced. Thank you!