![](/hq3/bg108.png)
i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
179
EXTERIOR TRIM SCREWS
FC HEADLIGHT BUCKET TO BODY: Set 5 retainers & 5 Phillips head screws for 1 side. C5355A 2 oz.
FC FRONT MESH GRILL TO BODY SCREWS: Set/7 chrome screws. C7303 1 oz.
FC FRONT MESH GRILL TO BODY RETAINERS: Set/7. C7303R 2 oz.
FC FRONT GRILL "EMBLEM" TRIM RETAINERS: The long center emblem was held on by 4 retainers to the mesh grill.
The threads of spring wire often break due to rust. These are not exact original but work great. Epoxy in place with JB Weld
or similar product until you have the nuts on. RETAINER: Sold each (4 needed) C3457A 6 oz.
Set of 4 PAL NUTS C7304 1 oz.
REAR AIR EXHAUST GRILL SCREWS: Sold full set for 1960-69 Cars & Vans.
Original Size: C4607 Oversize for stripped or rusted holes: C4608 Over, Oversize: C4608X
1960-64 Cars – REAR ALUMINUM GRILL SCREWS: We have found that these washer head/Phillips screws are much easier to use on the early grills (usually a
socket for a hex head screw will not fit through the opening – just put a little clay on your screwdriver and it's "easy".)
Set of 9 original size: C11691 2 oz. Set of 5 oversize: C11692 2 oz.
1965-66 Corsa – REAR GRILL INSERT SCREWS: Screws with the correct sized heads (including the oversized ones for stripped out holes.)
Set of 12 original size: Chrome – C1218AL 2 oz. Set of 6 oversize: Stainless Steel – C11688 2 oz.
CONVERTIBLE RETAINERS – Top Trim Stick Screws – see page 294
SCREWS: Chrome ends for binding above rear window – Set of 2 C7527 1 oz./set
Oversize – Set of 2 C7528 1 oz./set
SPECIAL NUT: For convertible top hold down. Sold Set of 2 (for one hold down). 1962-69 All.
C6036 1 oz./set
CONVERTIBLE TOP BOOT SNAP C574 1 oz. (use for repair as needed)
CONVERTIBLE TOP BOOT SCREWS: 1962-64 – used for the rear window boot snap trim where it makes a turn on each end. These go thru the original snaps.
Sold Set of 2. C6914 1/2 oz./set
ROOF EDGE WEATHERSTRIP SCREW (& NUTS): Enough screws (& nuts) to attach all the weatherstrips along both edges of the Convertible top.
May not be original style. One set = enough for one Car. 1962-64: C7152 (screws & nuts) 2 oz./set
1965-69: C7153 (washer head screws – no nuts) 2 oz./set
MORE CONVERTIBLE PARTS (SNAPS, SCREWS, CLIPS ETC) – See pgs. 292-295A
CHROME PHILLIPS HEAD SCREWS – DOOR SILL: 1960-64 – Set of 10 C1218AE 2 oz./set 1960-64 OS Screw – Set/5 C6910 1 oz./set
1965-69: C1218 1 oz. ea. 65-69 Set of 10: C1218A 2 oz./set 65-69 Oversize Head & Screw – Set of 5: C6910 1 oz./set
GAS DOOR GUARD SCREWS: Come with repro guards. Sold as a Set. 1960-64 (Stainless): C9768 1 oz./set
1965-69 (Zinc): C9769 1 oz./set
EMBLEM CLIPS – see page 296 & 308
FRONT SPOILER SCREWS: Original style screw and flat washer. Holds original GM – "plastic" spoiler on 1966-69 (also fits 1965 if you are putting it on).
Original Size (Full Set) C5175 4 oz./set
(For Rusted Holes) Oversize (1/2 Set) C5176 2 oz./set
HEADLIGHT BEZEL CHROME PHILLIPS HEAD SCREWS – Cars & Vans: 4 used per bezel "1" = 4 – Use oversize in case old screws stripped out hole.
1960-64 Cars & Vans – Original Size: C2178 2 oz./set 1965-69 Original Size: C2180 2 oz./set
1960-64 Cars & Vans – Oversize: C2179 2 oz./set 1965-69 Oversize: C2181 2 oz./set
REAR LICENSE BEZEL SCREWS: 1960-64 Cars – Set of 4 screws. Head style may vary slightly from original. C6915 1 oz./set
REAR ENGINE DECK LID TRIM SCREWS: Exact original – 1965-69 – Sold Sets of 6 – C6916 1 oz./set
WHEEL WELL TRIM SCREWS: Special plated ''washer head" screws. Special for wheel well trim (usually come with new trim).
1964-69 Each C1217 1/2 oz. ea. Set of 10 C1217A 1 oz./set
1964 DOG LEG TRIM SCREWS: Come with trim. Sold enough for left & right side. FRONT DOG LEGS C9770 1 oz./set
REAR DOG LEGS C9771 1 oz./set
1964 ROCKER PANEL TRIM RETAINER SCREWS: Set of 22 – C8040 2 oz./set OVERSIZE: Set of 10 C2125 2 oz./set
1965-69 ROCKER TRIM SCREWS: Set of 7 screws (enough for the retainer & the rocker trim to body on one side)
Original size: C7711RA 1 oz. Oversize Threads: C7711RX 1 oz.
WIRE & MAG COVER HEX HEAD SCREWS: For original mag and wire wheel covers. These hold the covers together but are NOT long enough
to hold the spinner on. C1358 1 oz. ea.
PLASTIC WASHERS – DOOR BOLTS: 1965-69 – Clear plastic washers used on the front side of the door under the chrome bolts and
(62-64 Ct. see page 224) washers. Set incIudes 4 small and 2 large washers. Enough for both sides. Sold Set of 6. C5362 1 oz./set
PLASTIC "Grill" NUTS: Hold front "grill" on 1963-64 – original style. C7866 ea. 1 oz.
PALNUTS – HOLD FRONT "Grill Bar" – 1965-69 CARS
Sold as Set of 5 original palnuts. C7322 Discontinued
ORIGINAL STYLE METAL HOOD RETAINERS: These were original for 1965. Some owners worry that if they fall off & hit the fan, that they
will cause damage. This is probably why they switched to plastic in 1966. These will not be included with insulation kits.
Original 1965 Metal Retainer C4616 2 oz. ea. Full Set/12 C4616K 1 lb.
65-69 VENT WINDOW CHROME SCREWS: These are the long chrome Phillips head screw
just below the vent window. Usually rusty. Sold set of 2. C9698 2 oz./set
C3457A
C574