Clark's Corvair Parts, Inc. - Corvair Parts Catalog - Over 12,000 parts

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

138

SHOCK

ABSORBERS

SHOCK BOLTS

Bottom Shock Bolts: Replace those weak, rusted bolts. Sold enough for one shock except 1960-64 STAINLESS STEEL (sold enough

for 2 shocks). 1960-64 also ﬁts 1961-65 Vans. All bolts include any necessary lock washers and/or nuts.

1960-64 Bolts 1965-69 Bolts

1960-64 Front or Rear STAINLESS C1091 4 oz. 1965-69 Front "GR 8" C4773 6 oz.

1960-64 Front or Rear "GR 8" C4772 2 oz. 1965-69 Rear "GR 8" C 4774 6 oz.

TOP NUT – STAINLESS: 1960-69 All

This won't stop the threads from rusting but at least the nut won't rust. C1294 1 oz. ea.

1960-64 Bottom

1960-64

1965-69 Front 1965-69 Rear

Shock Installation

When removing and installing all Corvair shocks, be sure to support the suspension as the shock is all that really

keeps the coil spring from ying out. Also, on installation, if most of the weight is not on the coil spring you may

not tighten the top nut enough to sufciently compress the top bushings. This will lead to a very bouncy ride.

C109R

1965-69

NEW Clark Hi-Tech Progressive Shock Absorbers

These high quality, multi-shim (self adjusting) shocks are specially designed for Corvairs. All mounting and bushings are exactly like

the factory original shocks and use all the original mounting bolts (order separately). The “regular” shocks are slightly firmer than

the factory stock shocks and the “gas” shocks are slightly firmer than the “regular” shocks – giving excellent control for more spirited

driving. (1965-69 fronts still need to order C109R special bushings). Full info, see page 137.

Hi-Tech Shocks – Order bolts below

All 4 lbs. each Regular Gas Charged

1960-64 Cars

1961-65 Vans

Front C2809 C2821

Rear C2812 C2822

1965-69 Cars

Front C2819 C2823

Rear C2820 C2824

HEAVY DUTY COIL SPRINGS = Gas shock or Koni shocks (on pg. 139)

are suggested with heavy duty coil springs.

Koni Shocks: page 139

'65-69 Special Note

Front shocks do not come with original special "lower" top shock bushings.

MUST BE USED! Sold Set of 2. C109R 12 oz./set

Steering Stabilizer – Damper

Helps stop wandering and

vibration. TOP QUALITY!

Comes complete, ready to

install. Not a substitute for replacing worn front end parts! A great handling

improvement for ALL Corvairs. Attaches to idler arm & drag link.

Fits 1960-69 Corvairs – including vans (FC). C1460 8 lbs.

Steering Stabilizer

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**138SHOCK ABSORBERSSHOCK BOLTSBottom Shock Bolts: Replace those weak, rusted bolts. Sold enough for one shock except 1960-64 STAINLESS STEEL (sold enough for 2 shocks). 1960-64 also fits 1961-65 Vans. All bolts include any necessary lock washers and/or nuts.1960-64 Bolts 1965-69 Bolts1960-64 Front or Rear STAINLESS C1091 4 oz. 1965-69 Front "GR 8" C4773 6 oz.1960-64 Front or Rear "GR 8" C4772 2 oz. 1965-69 Rear "GR 8" C 4774 6 oz.TOP NUT - STAINLESS: 1960-69 AllThis won't stop the threads from rusting but at least the nut won't rust. C1294 1 oz. ea.1960-64 Bottom1960-641965-69 Front 1965-69 RearShock InstallationWhen removing and installing all Corvair shocks, be sure to support the suspension as the shock is all that really keeps the coil spring from ?ying out. Also, on installation, if most of the weight is not on the coil spring you may not tighten the top nut enough to suf?ciently compress the top bushings. This will lead to a very bouncy ride.C109R1965-69NEW Clark Hi-Tech Progressive Shock AbsorbersThese high quality, multi-shim (self adjusting) shocks are specially designed for Corvairs. All mounting and bushings are exactly like the factory original shocks and use all the original mounting bolts (order separately). The "regular" shocks are slightly firmer than the factory stock shocks and the "gas" shocks are slightly firmer than the "regular" shocks - giving excellent control for more spirited driving. (1965-69 fronts still need to order C109R special bushings). Full info, see page 137. Hi-Tech Shocks - Order bolts belowAll 4 lbs. each Regular Gas Charged1960-64 Cars1961-65 VansFront C2809 C2821Rear C2812 C28221965-69 CarsFront C2819 C2823Rear C2820 C2824HEAVY DUTY COIL SPRINGS = Gas shock or Koni shocks (on pg. 139) are suggested with heavy duty coil springs.Koni Shocks: page 139'65-69 Special Note Front shocks do not come with original special "lower" top shock bushings. MUST BE USED! Sold Set of 2. C109R 12 oz./set Steering Stabilizer - Damper Helps stop wandering and vibration. TOP QUALITY! Comes complete, ready to install. Not a substitute for replacing worn front end parts! A great handling improvement for ALL Corvairs. Attaches to idler arm & drag link.Fits 1960-69 Corvairs - including vans (FC). C1460 8 lbs.Steering Stabilizer