Home Order Catalog Online Catalog New Items Contact Us

i
WARNING: Products on this page can expose you to a chemical, which is known to the State of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
41A
Cord 8/10: We now have the front hub (less studs), Letter K on page 42.
C12412 4 lbs.
Cord 8/10 Front Direction O-Ring: These O-rings hold the amber direc-
tional lens into the chrome housing on the Cord. C13422 2 oz.
Cord 8/10 Short Tie Rod Ends: These will replace the short tie rod ends
but you may have to cut 1/2" off threaded end. C4593 1 lb.
Cord Body Panels
Original unused Cord panels. Some fronts look like
they have pointed rear ends but they are not as
pointed as production fenders that had the fiberglass
extension attached and will need extensions added.
These panels are drop shipped by truck from New
Orleans, LA. Shipping cost not included.
Right front fender with part of the hood side with
more pointed rear which still required fiberglass
be molded on. CX9213
Right front fender with part of the hood side with
blunt rear end where fiberglass extension was
molded on. This fender does have a dent crease
about 18” long. CX9214
Left front fender with part of the hood side – with
more pointed rear which still required fiberglass
be molded on. CX9215
Left front fender with part of the hood side – with
more pointed rear which still required fiberglass
be molded on – headlight opening is cut out.
CX9216
CX9213
Cord Suspension Nuts: These large fine-thread nuts go on the front of the
Cord 8/10 rear suspension frame. We have car
ried the C12504 coarse threads
but found that some Cords used a fine thread. See page OT-43 on web site for
diagram. C12504F Set 2 Nuts and 2 LW 6 oz.
CORD PARTS ADDED DURING 2021
Replace yours or have a spare. Transfer
removable gear from old motor.
CX9200: NEW headlight motor for left side
(drivers) 5 lbs.
CX9201: NEW headlight motor for right
side (passengers) 5 lbs.
CX9202: USED headlight motor for left side (drivers) Tested & working
5 lbs.
CX9203: USED headlight motor for right side (passengers) Tested & working
5 lbs.
CX9213
CX9214
CX9214
CX9215
CX9215
CX9216
CX9216
MORE CORD PARTS
Set of 2 Green Plastic Sun Visors (plastic). Appears
new but brackets appear used: CX9216X 4 lbs.
C12327 but Machined (page 43 "J") Round Retainer
C12327M
C12329 but Machined (page 43 "K") Torsion Adjuster
C12329M
Lower Arm – main – Left Side (page 43 "G")
C12248L
Used Short Front Drive Axle with Bearing Housing
(page 42): C12486X
Front Bearing Hub/Pivot Hub, maybe used or new –
no choice. Right: C12288R / Left: C12288L
Cord Tie Rod Sleeves – Fit either side
C12522 2 lbs.
Cord Inner Tie Rod – longer – "bent" tie rod
C12377
Cord Outer Tie Rod
C12376 1 lb. 4 oz.
CLICK "NEXT" TO GET TO REGULAR PARTS
Cord 8/10 Headlight Electric Motors
iWARNING: Products on this page can expose you to a chemical, which is known to the State of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**41ACord 8/10: We now have the front hub (less studs), Letter K on page 42. C12412 4 lbs.Cord 8/10 Front Direction O-Ring: These O-rings hold the amber direc-tional lens into the chrome housing on the Cord. C13422 2 oz.Cord 8/10 Short Tie Rod Ends: These will replace the short tie rod ends but you may have to cut 1/2" off threaded end. C4593 1 lb.Cord Body Panels Original unused Cord panels. Some fronts look like they have pointed rear ends but they are not as pointed as production fenders that had the fiberglass extension attached and will need extensions added. These panels are drop shipped by truck from New Orleans, LA. Shipping cost not included.Right front fender with part of the hood side with more pointed rear which still required fiberglass be molded on. CX9213 Right front fender with part of the hood side with blunt rear end where fiberglass extension was molded on. This fender does have a dent crease about 18" long. CX9214 Left front fender with part of the hood side - with more pointed rear which still required fiberglass be molded on. CX9215 Left front fender with part of the hood side - with more pointed rear which still required fiberglass be molded on - headlight opening is cut out.CX9216 CX9213Cord Suspension Nuts: These large fine-thread nuts go on the front of theCord 8/10 rear suspension frame. We have carried the C12504 coarse threads but found that some Cords used a fine thread. See page OT-43 on web site for diagram. C12504F Set 2 Nuts and 2 LW 6 oz.CORD PARTS ADDED DURING 2021Replace yours or have a spare. Transfer removable gear from old motor.CX9200: NEW headlight motor for left side (drivers) 5 lbs. CX9201: NEW headlight motor for right side (passengers) 5 lbs.CX9202: USED headlight motor for left side (drivers) Tested & working 5 lbs.CX9203: USED headlight motor for right side (passengers) Tested & working 5 lbs.CX9213CX9214CX9214CX9215CX9215CX9216CX9216MORE CORD PARTSSet of 2 Green Plastic Sun Visors (plastic). Appears new but brackets appear used: CX9216X 4 lbs. C12327 but Machined (page 43 "J") Round Retainer C12327M C12329 but Machined (page 43 "K") Torsion Adjuster C12329M Lower Arm - main - Left Side (page 43 "G") C12248L Used Short Front Drive Axle with Bearing Housing (page 42): C12486X Front Bearing Hub/Pivot Hub, maybe used or new - no choice. Right: C12288R / Left: C12288L Cord Tie Rod Sleeves - Fit either sideC12522 2 lbs.Cord Inner Tie Rod - longer - "bent" tie rod C12377 Cord Outer Tie Rod C12376 1 lb. 4 oz.CLICK "NEXT" TO GET TO REGULAR PARTSCord 8/10 Headlight Electric Motors
Search In Corvair Catalog Content
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2022 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498