Home Order Catalog Online Catalog New Items Contact Us
 Prev 
i
WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**
80
BATTERY HOLD DOWN
A metal retainer went across the battery and was held down with a hooked bolt (and wingnut) and a short bolt.
These are priced less and will also fit 1961-64 Cars (need to order 1 shorter hook C3031A & 1 C3031). It will
also fit 1961-65 Vans (FC) but 1 hook (C4673) will have to be shortened 1".
These had a metal retainer that went across the battery. The Cars were held down with 2 hooked bolts and
wingnuts and the Vans had 2 longer hooked bolts with wing nuts. These will also fit 64 Cars and 64-65 Vans.
These originally used a plastic piece that went across the top of the battery and was held down
by 2 hooked bolts and wingnuts on the Cars and 2 longer hooked bolts on the Vans. You
may also use the one listed above for 61-63 Cars and Vans or the one listed for 1960 Cars.
1965 Cars also used a metal retainer across the battery. One side was held down with a hooked bolt that went
through a metal loop. The other side was a regular long bolt that threaded into a welded nut.
These batteries were held in differently. A bracket was welded to the body. The battery was pushed up against
that bracket (stop) and then a metal piece was put against the engine side of the battery and a bolt went
through it. As it was tightened, it pulled down on the retainer which pushed against the battery.
BATTERY HOLD DOWN RETAINERS
For Stock Size Batteries – Also See Bolts Below
1960 Reproduction: With acid resistant black coating. C7535 1 lb.
(will work on 61-64 Cars & 61-65 FC) Note: FC will have to shorten (1) C4673 hook.
1961-63 Reproduction: Cars & Vans; with acid resistant black coating. C5102 1 lb.
1964 Cars & 64-65 Vans Repro: Exact plastic repro. C10044 6 oz.
1965 Reproduction: With acid resistant black coating. C5103 1 lb.
1966-69 Metal "Pusher" C513 6 oz.
BATTERY BOLTS
All the correct size, ready to install. These are hard to get sizes, have them on hand.
1960: 2 different ones needed Long Hooked One C5096 6 oz.
Short (bolt) C5097 4 oz.
1961-62 Wagons: 2 needed C6825 6 oz.
1961-64 Cars (Exc. Wagons): 2 needed Hooks C3031 6 oz.
1961-64 Cars: (1 needed only when using a 1960 style hold down.) C3031A 5 oz.
1961-65 Vans: 2 needed Hooks C4673 6 oz.
1965 Cars: 2 different ones needed Hook C514 6 oz.
Bolt C514X 6 oz.
1966-69 Cars: For metal "pusher" C3700 2 oz.
WINGNUT: For all hooked battery bolts. C4321A 2 oz.
BATTERY HOLD DOWN WASHERS: These are used on top of the original hold downs on all early cars & FC's
(except the original 1964 plastic hold down, but we suggest them for 64 also). Sold set of 2.
1960-63, 65 Cars & 61-63 FC C2564W 2 oz.
1964 Cars & 64-65 FC C4321X 2 oz.
BATTERY TRAYS
Black plastic tray that holds battery to catch & direct any spilled battery acid. The original thickness battery tray
material is hard to find. Clark's chose to go to 20% THICKER.
1960-64 Tray: Reproduction (Also fits 61-65 Vans) C6826 12 oz.
1965-69 Tray: ReproductIon C511R 12 oz.
FC Battery Drain & Miscellaneous Parts
A. Plastic insert in tray. Exact repro. C9814 1 oz.
B. Hose C7736 4 oz.
C. Grommet in lower panel. Nice replacement, but not exact. C12653 2 oz.
D. FC BATTERY CABLE rubber coated RETAINER – rubber coated metal retainer holds the battery cable & the cable going
to the voltage regulator. It's near the battery box & is usually rusty or rubber is peeling. C13052 2 oz.
E. Battery box & rubber coated retainer BOLTS – bolts to attach battery box & retainer. Set of 5 C13053 4 oz.
'60-'64
C6826
'65-'69
C511R
1960 CARS
1961-63 CARS
& 61-63 VANS
1964 CARS &
64-65 VANS
1965 CARS
1966-69 CARS
More FC Battery Parts
Page 79
C5103
C9814
C7736
C12653
iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**80BATTERY HOLD DOWNA metal retainer went across the battery and was held down with a hooked bolt (and wingnut) and a short bolt. These are priced less and will also fit 1961-64 Cars (need to order 1 shorter hook C3031A & 1 C3031). It will also fit 1961-65 Vans (FC) but 1 hook (C4673) will have to be shortened 1".These had a metal retainer that went across the battery. The Cars were held down with 2 hooked bolts and wingnuts and the Vans had 2 longer hooked bolts with wing nuts. These will also fit 64 Cars and 64-65 Vans.These originally used a plastic piece that went across the top of the battery and was held down by 2 hooked bolts and wingnuts on the Cars and 2 longer hooked bolts on the Vans. You may also use the one listed above for 61-63 Cars and Vans or the one listed for 1960 Cars.1965 Cars also used a metal retainer across the battery. One side was held down with a hooked bolt that went through a metal loop. The other side was a regular long bolt that threaded into a welded nut.These batteries were held in differently. A bracket was welded to the body. The battery was pushed up against that bracket (stop) and then a metal piece was put against the engine side of the battery and a bolt went through it. As it was tightened, it pulled down on the retainer which pushed against the battery.BATTERY HOLD DOWN RETAINERSFor Stock Size Batteries - Also See Bolts Below1960 Reproduction: With acid resistant black coating. C7535 1 lb. (will work on 61-64 Cars & 61-65 FC) Note: FC will have to shorten (1) C4673 hook.1961-63 Reproduction: Cars & Vans; with acid resistant black coating. C5102 1 lb.1964 Cars & 64-65 Vans Repro: Exact plastic repro. C10044 6 oz.1965 Reproduction: With acid resistant black coating. C5103 1 lb.1966-69 Metal "Pusher" C513 6 oz.BATTERY BOLTSAll the correct size, ready to install. These are hard to get sizes, have them on hand.1960: 2 different ones needed Long Hooked One C5096 6 oz. Short (bolt) C5097 4 oz.1961-62 Wagons: 2 needed C6825 6 oz.1961-64 Cars (Exc. Wagons): 2 needed Hooks C3031 6 oz.1961-64 Cars: (1 needed only when using a 1960 style hold down.) C3031A 5 oz.1961-65 Vans: 2 needed Hooks C4673 6 oz.1965 Cars: 2 different ones needed Hook C514 6 oz. Bolt C514X 6 oz.1966-69 Cars: For metal "pusher" C3700 2 oz.WINGNUT: For all hooked battery bolts. C4321A 2 oz. BATTERY HOLD DOWN WASHERS: These are used on top of the original hold downs on all early cars & FC's (except the original 1964 plastic hold down, but we suggest them for 64 also). Sold set of 2. 1960-63, 65 Cars & 61-63 FC C2564W 2 oz. 1964 Cars & 64-65 FC C4321X 2 oz.BATTERY TRAYSBlack plastic tray that holds battery to catch & direct any spilled battery acid. The original thickness battery tray material is hard to find. Clark's chose to go to 20% THICKER. 1960-64 Tray: Reproduction (Also fits 61-65 Vans) C6826 12 oz. 1965-69 Tray: ReproductIon C511R 12 oz.FC Battery Drain & Miscellaneous PartsA. Plastic insert in tray. Exact repro. C9814 1 oz.B. Hose C7736 4 oz.C. Grommet in lower panel. Nice replacement, but not exact. C12653 2 oz. D. FC BATTERY CABLE rubber coated RETAINER - rubber coated metal retainer holds the battery cable & the cable going to the voltage regulator. It's near the battery box & is usually rusty or rubber is peeling. C13052 2 oz. E. Battery box & rubber coated retainer BOLTS - bolts to attach battery box & retainer. Set of 5 C13053 4 oz. '60-'64C6826'65-'69C511R1960 CARS1961-63 CARS& 61-63 VANS1964 CARS & 64-65 VANS1965 CARS1966-69 CARSMore FC Battery PartsPage 79C5103C9814C7736C12653
Next
Search In Corvair Catalog Content
CLARKS- MORE THAN PARTS.

Copyright © 1978, 2019 Clark's Corvair Parts, Inc., "Clark's Corvair Parts" and the "Corvair Map" are registered service marks of Clark's Corvair Parts, Inc.
400 Mohawk Trail Shelburne Falls, MA 01370 USA All rights reserved.
Main Office Phone: 413.625.9776 Fax: 413.625.8498