Clark's Corvair Parts, Inc. - Corvair Parts Catalog - Over 12,000 parts

WARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**

DUAL EXHAUST

All Pipes & Mufﬂers Now Aluminized

1. Welded: Complete – just like the factory offered. Easier to install. NO clamps to loosen.

2. Clamped: You have to adjust and clamp the U-PIPE and tail pipe. A little less expensive.

1. Welded – factory style DUAL EXHAUSTS

Original Style WELDED Tail Pipe DUAL EXHAUSTS

FORGET the clamps and separate pipes! We are mig welding the "U" pipes and exact repro 140 style left & right tail pipes(1 3/4") on our large tail pipe muffler exactly to

the factory 140 specs. Order the Dual Exhaust Installation Kits below OR separate parts as needed. Also available in Multi-Kits: See Blue page MK-3.

140 HP engines had 4 carbs. DO NOT FIT VANS. (see page 34)

mufﬂer WITH

welded

"U" pipe & tail pipe

Note – UPS Air : These go for dimensional weight of 29 lbs. for 1 and 35 lbs. for 2

Right Side

(passengers)

Left Side

(drivers)

1960-69 Cars: ALL engines (exc. 140HP & Turbo)

C10995 17 lbs. C10996 17 l b s .

1960-69 Cars: ALL with 140HP engines

C10997 17 lbs. C10998 17 l b s .

Installation Kit – Dual Exhaust

"1" is enough for BOTH SIDES. Includes: (2) hangers (original style), (2) stainless straps, (2) stainless bolts and (2) packings.

If ADDING left shield order (1) C1490 strap and (1) C2118 bolt. 80-11OHP Cars C9052 4 lbs.

140HP Cars C9052A 4 lbs.

CHROME TAIL PIPES for our WELDED EXHAUST SYSTEMS: Sold as a pair. C11582 3 lbs.

2. Clamped DUAL EXHAUSTS: All years

These KITS give you a (140 style) Clamped Dual Exhaust. EACH KIT fits either left or right (order 2) and includes "U" pipe, muffler, tail pipe and necessary clamps.

We also suggest Our Installation Kit. FC (Vans), see page 34.

Engine Size

with C126X Muffler

with 1 1/2" Tail Pipe

with C126XL Muffler

with 1 3/4" Tail Pipe

80-110HP (order 2)

C256N2 15 lbs. C256NL2 15 lbs.

140HP (order 2)

- - - - - - - - - - C256NL 15 lbs.

Installation Kit – Dual Exhaust

"1" is enough for BOTH SIDES. Includes: (2) hangers (original style), (2) stainless straps,

(2) stainless bolts and (2) packings.

If ADDING left shield order (1) C1490 strap and (1) C2118 bolt.

80-11OHP Cars C9052 4 lbs.

140HP Cars C9052A 4 lbs.

Left Side

Right Side

U & Tail Pipes

are aluminized

ORIGINAL STYLE MIG WELDS

1/2" from mufﬂer (like the factory ones)

Chrome Tips

See Page 36, #10

iWARNING: Products on this page can expose you to a chemical, which is known to the St ate of California to cause cancer or reproductive harm. **For more information go to www.P65Warnings.ca.gov**35DUAL EXHAUST All Pipes & Mufflers Now Aluminized1. Welded: Complete - just like the factory offered. Easier to install. NO clamps to loosen.2. Clamped: You have to adjust and clamp the U-PIPE and tail pipe. A little less expensive.1. Welded - factory style DUAL EXHAUSTSOriginal Style WELDED Tail Pipe DUAL EXHAUSTSFORGET the clamps and separate pipes! We are mig welding the "U" pipes and exact repro 140 style left & right tail pipes(1 3/4") on our large tail pipe muffler exactly to the factory 140 specs. Order the Dual Exhaust Installation Kits below OR separate parts as needed. Also available in Multi-Kits: See Blue page MK-3. 140 HP engines had 4 carbs. DO NOT FIT VANS. (see page 34)muffler WITHwelded "U" pipe & tail pipeNote - UPS Air : These go for dimensional weight of 29 lbs. for 1 and 35 lbs. for 2Right Side(passengers)Left Side(drivers)1960-69 Cars: ALL engines (exc. 140HP & Turbo) C10995 17 lbs. C10996 17 l b s .1960-69 Cars: ALL with 140HP engines C10997 17 lbs. C10998 17 l b s .Installation Kit - Dual Exhaust"1" is enough for BOTH SIDES. Includes: (2) hangers (original style), (2) stainless straps, (2) stainless bolts and (2) packings.If ADDING left shield order (1) C1490 strap and (1) C2118 bolt. 80-11OHP Cars C9052 4 lbs. 140HP Cars C9052A 4 lbs.CHROME TAIL PIPES for our WELDED EXHAUST SYSTEMS: Sold as a pair. C11582 3 lbs.2. Clamped DUAL EXHAUSTS: All yearsThese KITS give you a (140 style) Clamped Dual Exhaust. EACH KIT fits either left or right (order 2) and includes "U" pipe, muffler, tail pipe and necessary clamps. We also suggest Our Installation Kit. FC (Vans), see page 34.Engine Sizewith C126X Mufflerwith 1 1/2" Tail Pipewith C126XL Mufflerwith 1 3/4" Tail Pipe80-110HP (order 2) C256N2 15 lbs. C256NL2 15 lbs.140HP (order 2)- - - - - - - - - - C256NL 15 lbs.Installation Kit - Dual Exhaust"1" is enough for BOTH SIDES. Includes: (2) hangers (original style), (2) stainless straps, (2) stainless bolts and (2) packings.If ADDING left shield order (1) C1490 strap and (1) C2118 bolt. 80-11OHP Cars C9052 4 lbs. 140HP Cars C9052A 4 lbs.Left SideRight SideU & Tail Pipesare aluminizedORIGINAL STYLE MIG WELDS1/2" from muffler (like the factory ones)Chrome TipsSee Page 36, #10